Similar to This
View all stencils →About this stencil
A leaping dolphin caught mid-arc, its curved body, pointed snout, dorsal fin, and sweeping tail all glowing through one sculpted cut-through opening, with an intact rind island shaping the pectoral fin and belly. The interior island is the key feature: cut the outer outline in sections and leave the connecting bridges to the island untouched until the very end, then trim them carefully to final width. This design is rated Intermediate and takes most carvers around 75 minutes from trace to glow. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediateFan Tail Fish with Low Notches
A plump fantail goldfish glides across the pumpkin as one big glowing silhouette, with a rounded body, sweeping double tail, and small notched fins along the belly. The entire fish is pierced through in a single connected shape, so it lights up like an aquarium at night. At medium difficulty the low fin notches are the detail work; cut the broad body and tail first, then nick out the small fin points with short careful strokes.
Beginner-friendlyHammerhead with Unequal Fins
A hammerhead shark cruising in full profile, its wide flattened head, tall dorsal fin, and forked tail all reading instantly in silhouette. The complete shark is one cut-through opening that stretches across the pumpkin's widest face for a dramatic glowing display. An easy carve with one caution: the slim notch between the tail forks is delicate, so cut it before removing the large body piece.
AdvancedGoldfish with Flowing Fins
A fancy fantail goldfish glides across the pumpkin with billowing fins, a sweeping double tail, and a body covered in overlapping scale rows. This is a continuous-wall shading design: the skin is shaved away at varying depths so fins glow softly and each scale reads in relief, with no pierced holes. Rated hard for its texture work, it goes best if you outline the fish first, clear the background layer, then carve the scales one row at a time.
AdvancedSeahorse with a Ribbed Fan
An elegant seahorse posed upright with a ridged, segmented body, a ribbed fan fin on its back, and a tail that coils into a tight spiral. This is a shading pattern: you carve away skin at varying shallow depths to sculpt the plates, fin ribs, and curl while the wall stays solid. Rated hard for its fine detail, it rewards a light touch; work the tiny tail spiral with a small gouge last.
AdvancedSeahorse with Ten Raw Plates
An elegant seahorse curls down the pumpkin in profile, its coronet, snout, banded belly plates, back fin, and spiral tail all rendered in carved relief. This is a shading design: the body is shaved to a pale glow while the plate lines and outline are left or scraped at different depths for dimension, with no pierced openings. Rated hard for its fine segmentation, shave the belly bands one at a time and keep each dividing ridge intact.
Beginner-friendlyRound Fish and Three Bubbles
A plump fish silhouette with a notched triangle tail swims across the pumpkin, trailed by three round bubbles rising toward the stem. The fish body and each bubble cut completely through, giving anglers a bold, glowing catch with almost no fine detail to fuss over. An easy pattern; remove the large body in two pieces split at the tail notch, then drill or carve the bubbles smallest to largest.