Similar pumpkin stencils
View all stencils βAbout this stencil
This free Cruising Hammerhead pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. A hammerhead shark cruising in full profile, its wide flattened head, tall dorsal fin, and forked tail all reading instantly in silhouette. The complete shark is one cut-through opening that stretches across the pumpkin's widest face for a dramatic glowing display. An easy carve with one caution: the slim notch between the tail forks is delicate, so cut it before removing the large body piece. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Beginner-friendly. Estimated time: 35-55 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 35-55 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Follow the hammerhead outline. Cut region 1 around the broad right head, curved dorsal fin, unequal lower fins and split left tail. Preserve the open white notches between fins. Keep the face plain and support the long plug before finishing either tail tip.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
IntermediateReef Prowler Pumpkin Stencil
A left-facing hammerhead shark in full profile, wide head, tall dorsal fin, and swept tail, finished with three short gill slashes behind the head. The whole body is a shaded shape: you peel the skin inside the outline down to pale flesh and leave the pumpkin wall intact. Shave with the grain in long horizontal strokes to keep the body smooth, then deepen the gill lines and eye dot last for contrast.
Beginner-friendlyThe Big Catch Pumpkin Stencil
A plump fish silhouette with a notched triangle tail swims across the pumpkin, trailed by three round bubbles rising toward the stem. The fish body and each bubble cut completely through, giving anglers a bold, glowing catch with almost no fine detail to fuss over. An easy pattern; remove the large body in two pieces split at the tail notch, then drill or carve the bubbles smallest to largest.
AdvancedGentle Giant Pumpkin Stencil
A whale shark glides across the pumpkin in full profile, its wide flat head, tall tail fin, and back covered in the species' signature spots and ridge lines. This is a shading design with no pierced holes: you shave the skin inside the body while leaving orange skin for the spots, gill slits, and stripes. Shave the large body sections to an even depth first, then re-crisp the spot edges with a detail knife.
AdvancedSpotted Whale Shark
A whale shark glides across the pumpkin, its wide flat head, tall tail fin, and body covered in the species' signature grid of pale spots, with a few bubbles drifting nearby. The shark's outline and spots are shaved to glow while the surrounding skin stays dark, so no section is pierced through. Do the long body outline first, then the spots; a small round scoop or melon-baller keeps all those dots consistent.
AdvancedDeep Sea Sculpt Pumpkin Stencil
A sculptural hammerhead shark carved in raised relief, with the background cleared away so the body, fins, and curved tail stand proud of the wall in layered depths. Fin edges, the mouth line, and gill grooves are incised for realistic detail while nothing pierces through. Rough out the background to one even depth before shaping the shark itself, and keep at least half the wall thickness so the raised body stays sturdy.
Beginner-friendlyTwo Sharks Pumpkin Stencil
Two sharks overlap in a dramatic diving composition for this easy pumpkin stencil: a large shark lunges forward with serrated teeth exposed, and a smaller shark curves below it. The negative space between the two bodies is cut away, leaving the sharks as solid orange pumpkin forms. The jagged row of teeth on the large shark is the most detailed edge in the design. Cut the teeth line with individual short plunge-cuts per tooth point rather than sawing along the jagged edge, which reduces the risk of tearing the tips.





