Similar pumpkin stencils
View all stencils βAbout this stencil
The Deep Sea Sculpt pumpkin stencil is a free printable PDF template. Print it, tape the pattern on, and trace it onto your pumpkin. A sculptural hammerhead shark carved in raised relief, with the background cleared away so the body, fins, and curved tail stand proud of the wall in layered depths. Fin edges, the mouth line, and gill grooves are incised for realistic detail while nothing pierces through. Rough out the background to one even depth before shaping the shark itself, and keep at least half the wall thickness so the raised body stays sturdy. It makes a fun jack-o'-lantern design for Halloween night. It is rated Advanced. Estimated time: 2-3 hours. Actual time varies with preparation, pumpkin size and experience. Fine details and narrow supports need careful planning. Follow the cutting and shading key in this designβs PDF.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a continuous-wall shading design: you never cut all the way through the pumpkin. On the printable pattern, light gray regions get just the skin shaved off for a faint glow, dark gray regions are scraped deeper so more light comes through, and white areas keep their skin untouched. The numbers give you the safest working order. Plan on about 2-3 hours from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the wall to about 1 inch behind the design so light can pass through the shaded areas. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer the outlines by poking dots along every line. Work with a loop tool, clay ribbon scraper, or the back of a spoon rather than a saw.
Shading order
- Trace the pale shark (1). Scrape all gray areas shallowly. Start at the broad head marked 1. Preserve the white raw-back field, eye pupil, mouth, four curved gill marks and background. Keep the tiny shallow teeth visible inside the mouth.
- Brighten head and fins (2). Deepen the dark-gray head and chest area marked 2, both large lower fins, dorsal-fin center and narrow tail highlight. Leave pale borders and small lower fin tips shallow. Preserve the raw back and gills; fine sculpted texture is simplified.
Check your progress often: set a bright LED inside and dim the room lights, and the glow shows exactly where to scrape deeper. Go slowly near thin spots and stop before the wall flexes; a pierced wall cannot be undone.
Tools you'll need
For a advanced carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and small gouge if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedSpotted Whale Shark
A whale shark glides across the pumpkin, its wide flat head, tall tail fin, and body covered in the species' signature grid of pale spots, with a few bubbles drifting nearby. The shark's outline and spots are shaved to glow while the surrounding skin stays dark, so no section is pierced through. Do the long body outline first, then the spots; a small round scoop or melon-baller keeps all those dots consistent.
AdvancedElegant Seahorse Pumpkin Stencil
An elegant seahorse curls down the pumpkin in profile, its coronet, snout, banded belly plates, back fin, and spiral tail all rendered in carved relief. This is a shading design: the body is shaved to a pale glow while the plate lines and outline are left or scraped at different depths for dimension, with no pierced openings. Rated hard for its fine segmentation, shave the belly bands one at a time and keep each dividing ridge intact.
AdvancedGentle Giant Pumpkin Stencil
A whale shark glides across the pumpkin in full profile, its wide flat head, tall tail fin, and back covered in the species' signature spots and ridge lines. This is a shading design with no pierced holes: you shave the skin inside the body while leaving orange skin for the spots, gill slits, and stripes. Shave the large body sections to an even depth first, then re-crisp the spot edges with a detail knife.
AdvancedTidepool Starfish Pumpkin Stencil
A large textured starfish floats among rising bubbles and wavy seaweed fronds in this beachy shading design. Nothing is cut through; the starfish body, dots of bumpy texture, bubbles, and seaweed are all skin-shaved to different depths so they glow in layered tones of gold. The dotted texture along each arm is what makes it a hard carve; use a small V-gouge for the bumps and keep your shaved areas shallow so the wall never breaks through.
IntermediateReef Prowler Pumpkin Stencil
A left-facing hammerhead shark in full profile, wide head, tall dorsal fin, and swept tail, finished with three short gill slashes behind the head. The whole body is a shaded shape: you peel the skin inside the outline down to pale flesh and leave the pumpkin wall intact. Shave with the grain in long horizontal strokes to keep the body smooth, then deepen the gill lines and eye dot last for contrast.
AdvancedStar Vault Pumpkin Stencil
A gymnast soars in a full split leap, one arm reaching skyward toward a trail of stars and a curved comet streak behind her. The whole figure is a shaded carve on a continuous wall, shaving the skin so the silhouette glows without any pierced holes, which preserves the slender arms and pointed toes. Shave the thin limbs in light passes with a small loop tool, since going too deep on those narrow lines risks breaking through.





