Similar pumpkin stencils
View all stencils βAbout this stencil
This free Moonlight Drifter pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. A ribbed jellyfish bell hovers near the top of the pumpkin, trailing eight long wavy tentacles that flow all the way to the base, with small bubbles rising on either side. The bell segments and tentacles are shaved to glowing flesh while thin strips of dark skin separate every ribbon, and the bubbles are pierced through. This expert shading design demands a steady hand; work each tentacle top to bottom in one continuous peel so the curves stay smooth and evenly lit. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Expert / Pro. Estimated time: 3-4 hours. Actual time varies with preparation, pumpkin size and experience. Intricate details and fragile supports need patience. Technique depends on the design; follow its PDF rather than assuming multiple depth layers.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a continuous-wall shading design: you never cut all the way through the pumpkin. On the printable pattern, light gray regions get just the skin shaved off for a faint glow, dark gray regions are scraped deeper so more light comes through, and white areas keep their skin untouched. The numbers give you the safest working order. Plan on about 3-4 hours from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the wall to about 1 inch behind the design so light can pass through the shaded areas. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer the outlines by poking dots along every line. Work with a loop tool, clay ribbon scraper, or the back of a spoon rather than a saw.
Shading order
- Shave the dome and tendrils. Shallow-shave all gray regions, with example 1 along the dome rim. Keep five broad white dome panels, two white edge slivers and all spaces between tendrils untouched. The white regions retain their full skin and flesh.
- Light the bell and skirt. Deepen the dark-gray dome rim and broad lower skirt marked 2. Follow the scalloped attachment edge. Preserve all white panels and the thin pale border; the entire wall remains continuous.
- Follow eight flowing tendrils. Deepen eight dark-gray tendril centers, with a broad example marked 3. Follow each unequal bend from its attachment downward. Keep their pale borders shallow and white separating channels fully intact. Tiny surface ripples are consolidated.
- Finish eleven bubbles. Deepen eleven bubble centers, with a right example marked 4. Five bubbles sit left of the jellyfish and six right. Keep the shallow oval rims and their varied sizes.
Check your progress often: set a bright LED inside and dim the room lights, and the glow shows exactly where to scrape deeper. Go slowly near thin spots and stop before the wall flexes; a pierced wall cannot be undone.
Tools you'll need
For a expert / pro carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and detail gouges if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Expert / ProThe Beaming Sunburst Pumpkin Stencil
A beaming sunburst face with closed happy crescent eyes, a small triangle nose, and a huge picket-tooth grin, all encircled by a radiating ring of alternating teardrop and triangle ray cutouts. Every ray, tooth gap, and feature pierces through, and the sheer count of small openings makes it an expert carve. Cut the outer rays in sequence around the circle first, rotating the pumpkin as you go, before opening the large mouth.
Expert / ProWoodland Toadstool Relief
An enchanted cluster of spotted toadstools carved in deep relief: one grand mushroom with a striped, gilled underside towers over smaller caps, ribbed stems, and leafy ground cover below. There are no pierced holes; the whole scene is sculpted by shaving the wall to different depths so light glows warmest under the big cap. This expert design rewards planning, so rough out the major cap shapes first and save the fine gill lines and spots for last.
Expert / ProDeep Space Dream Pumpkin Stencil
A sweeping spiral galaxy wraps across the entire pumpkin face, its curved arms shaved in graduated depths so the core glows brightest, while three ringed planets and scattered stars orbit the edges in raised relief. Nothing is pierced; every effect comes from continuous-wall shading at different thicknesses. Expert-level patience pays off here: establish the spiral arms as broad shallow bands first, then deepen toward the center in passes to build the luminous gradient.
Expert / ProCosmic Whirl Pumpkin Stencil
A sweeping spiral galaxy with two luminous arms curling around a bright core, surrounded by four-point stars and a scatter of small stardust dots. The entire scene is skin-shave work with no pierced holes: the arms are shaved wide and shallow while the dots and stars are picked out individually. An expert pattern because of its long tapering curves; keep your gouge moving in smooth continuous strokes along each arm.
Expert / ProMoonlit Pines Pumpkin Stencil
A dreamy night landscape wraps the pumpkin: a large crescent moon and a sky full of four-point stars shine above rolling wooded hills dotted with pine trees. The whole scene is skin-shave shading with no pierced holes, so moon, stars, ridgelines, and trees glow at different intensities depending on how deep you scrape. As an expert design, map your depths first: carve the moon deepest for the brightest glow, the hills shallowest for a soft dusk.
Expert / ProCompass Rose Pumpkin Stencil
A layered compass-rose mandala: an eight-point star nests inside a larger star, all wrapped in a ring of carved circles and framed by a shaved border medallion. The entire design is relief work at several depths with no pierced openings, which is why it rates expert. Establish the shallowest background layer first, then step each inner layer progressively deeper so the star points read as crisp raised facets.





