Similar to This
View all stencils →About this stencil
An expert-level layered blossom: five broad veined petals fan around a raised dotted center, wrapped in overlapping leaves and curling scrolls that spill toward the pumpkin's edges. It is entirely surface work, shaving the skin at many depths with nothing cut through, so it looks striking even in daylight on a fall porch. Sharpen your gouges and work from the deepest petals outward, layer by layer. This design is rated Expert / Pro and takes most carvers around 240 minutes from trace to glow. Sculpting-grade work. Three or more depth layers, fine detail.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a continuous-wall shading design: you never cut all the way through the pumpkin. On the printable pattern, light gray regions get just the skin shaved off for a faint glow, dark gray regions are scraped deeper so more light comes through, and white areas keep their skin untouched. The numbers give you the safest working order. Plan on about 3-4 hours from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the wall to about 1 inch behind the design so light can pass through the shaded areas. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer the outlines by poking dots along every line. Work with a loop tool, clay ribbon scraper, or the back of a spoon rather than a saw.
Shading order
- Establish the flower and vines. Shallow-shave all gray regions, beginning with the upper-left vine marked 1. Follow the five large petals, five small leaves and curling vines. Preserve every white inner teardrop and all white background gaps intact.
- Deepen the five outer petals. Deepen the five broad dark-gray petal faces, with examples marked 2. Preserve their shallow outer rims and white internal teardrops. Keep the unequal upward, sideward and downward petal directions.
- Refine inner petals and seeds. Deepen the five small inner-petal glints and thirteen seed glints, with one center example marked 3. The small seed shapes remain separate. Do not shave the surrounding white teardrops.
- Finish the five vine leaves. Deepen all five small dark-gray leaf faces, with an upper-left example marked 4. Keep the six curling vine or stem paths shallow. Preserve the open spiral centers; check the glow without piercing the wall.
Check your progress often: set a bright LED inside and dim the room lights, and the glow shows exactly where to scrape deeper. Go slowly near thin spots and stop before the wall flexes; a pierced wall cannot be undone.
Tools you'll need
For a expert / pro carve like this you'll want a full ribbon tool set, clay sculpting loops, x-acto knife, and dremel (optional). Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediateEight Petals and Three Seeds
Eight oval petals radiate from a dotted center like a stylized sunflower, with three small seed holes in the middle and a leafy stem opening anchoring the bloom below. Each petal is a pierced oval, and the skin spokes left between them hold the flower together while letting light pour through. Cut opposite petals in pairs, top then bottom, left then right, so the spokes never take uneven strain.
Expert / ProSunflower with a Curled Center
A show-stopping sunflower with two rings of layered petals around a big textured seed head, flanked by veined leaves below. This expert shading piece uses multiple depths: petals shaved smooth, petal shadows cut deeper where layers overlap, and the center stippled with dozens of tiny seed dimples. Rough in all the petal shapes at one shallow depth first, then return to carve the overlaps, saving the seed texture for last.
Expert / ProSunflower with Layered Petals
A lush sunflower filling the pumpkin face, with a densely dotted seed head ringed by two overlapping layers of pointed petals and broad leaves fanning out below. It is carved entirely as continuous-wall relief, shaving the skin at multiple depths so petals overlap realistically with no pierced openings. As an expert project, plan your levels first: deepest around the outer background, shallower between petal layers, and the seed dome nearly untouched.
IntermediateSunflower with Eleven Petals
A tall sunflower blooms across the whole pumpkin face, with eleven glowing petals radiating around a dark seed disc dotted with tiny pinprick holes, plus a straight stem and two leaves below. The petals, stem, and leaves are shaved to the flesh rather than pierced, while the seed dots are drilled through for sparkle. For this medium shading design, etch all the petal outlines first, then peel each petal evenly and finish by drilling the seed dots in a loose spiral.
AdvancedFive-Petal Flower with Curls
A five-petal magnolia bloom with a dotted center opens across the pumpkin, framed by curling vine scrolls and shaded leaves. Everything is skin-shave work at layered depths: the petals glow brightest, the leaves and curls sit dimmer, and no part of the wall is pierced. Shave each petal from the center outward with a loop tool to build that soft gradient from bright to dark.
AdvancedSixteen-Petal Sunflower
A sixteen-petal sunflower blooms across the whole face of the pumpkin, complete with a dotted seed head, layered leaves, and a curving stem. This is a skin-shave design: you peel the skin inside every petal and leaf while leaving orange outlines and vein lines untouched, so no light shines through. Sharpen your tools before starting and shave the big petals in long strokes from base to tip for smooth, even texture.