Similar pumpkin stencils
View all stencils →About this stencil
The Floating Ghost pumpkin stencil is a free printable PDF template. Print it, tape the pattern on, and trace it onto your pumpkin. A small ghost floats at the center of a large circular negative-space opening in this easy ghost pumpkin stencil. The ghost has two spiral-curl eyes, an oval open mouth, and small wavy arms extending to each side, all kept solid as islands within the big cut-through circle. The circular border, the ghost's body and details, and the wispy lower tail all remain as intact pumpkin skin while the surrounding area is carved away. Cut the two curl-eye shapes and small arm details before removing the large circular background so the ghost's delicate features stay supported. It makes a fun jack-o'-lantern design for Halloween night. It is rated Beginner-friendly. Estimated time: 60-90 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 60-90 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the eyes and mouth. Start with the two eyes, cutting carefully around the small white curl inside each one, then remove the oval mouth. These enclosed pieces come first while the wall is solid.
- Carve the bottom wisps. Cut the three small trailing pieces under the ghost, the thin curved streak and the two wavy fingers. They are thin and pointed, so saw toward each tip from both directions.
- Cut the upper crescents. Remove the two big curved night-sky pieces over the ghost's head, left and right. Keep the white gap between them at the top intact.
- Release the side pieces last. Cut the large left piece with the notch that forms the ghost's little hand, then the right piece with its matching notch. Leave a small tab on each until its other edges are done, support the plug, then free it; the white outline of the ghost between all these pieces must stay uncut.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyTiptoe Boo Ghost Pumpkin Stencil
Print the Tiptoe Boo Ghost pumpkin stencil with a numbered cutting pattern and step-by-step guide. Easy design; print at actual size.
Beginner-friendlyThe Friendly Phantom Pumpkin Stencil
A single billowy ghost with two raised arms and a wavy hem ending in three uneven points, carved as one big glowing cutout. The entire ghost silhouette is pierced through, so candlelight fills the friendly specter from arms to tail. This easy one-piece design suits squat pumpkins with plenty of front surface; cut the smooth outer curves first and finish with the scalloped bottom points, which are the only fiddly bits.
Beginner-friendlyThe Friendly Waver Pumpkin Stencil
A friendly little ghost lifts one stubby arm in a wave, its four-lobed hem trailing below round eyes and a happy open mouth. The whole figure is shaved shading: you remove skin inside the body so it glows softly, then leave the eyes and mouth as raised uncarved pumpkin. Even, shallow shaving is all it takes, which makes this a forgiving introduction to etching.
Beginner-friendlyJust Saw a Ghost Pumpkin Stencil
A comically startled face made of just three openings: two slightly unequal oval eyes and a tall oval mouth frozen mid-gasp, like a pumpkin that just saw a ghost. All three shapes are cut straight through, with the ovals set high and the mouth low for maximum surprise. This easy pattern also works beautifully on craft pumpkins; use a fine serrated saw for smooth oval curves.
Beginner-friendlyKing of the Crypt Pumpkin Stencil
A round skull face wearing a crumbling castle battlement crown tops this ghost pumpkin stencil. Large angry eyes with flame-shaped pupils, a small cracked nose bridge, and a row of jagged teeth fill the circular face, all pierced as cut-throughs while the surrounding ring frame and crown teeth remain as solid pumpkin. The lit jack-o-lantern glows through the eyes and mouth in a fierce scowl. Carve the crown battlements first before cutting the circle frame below, so the narrow wall sections holding the crown have full support while you work.
Beginner-friendlyThe Wailing Ghost Mask Pumpkin Stencil
A ghost-faced horror-movie mask is the subject of this easy pumpkin stencil: an elongated oval skull shape with two large teardrop eye cutouts, a small oval nose hole, and a wide gaping mouth that tapers to a pointed chin. Flowing tendrils extend from the lower sides of the mask. The three facial openings glow as three distinct shapes, and the flowing lower extensions give the mask a draping, spectral quality when lit. Cut the narrow nose piece first since it sits between the two large eye openings and is the most vulnerable to tearing.