Similar to This
View all stencils →About this stencil
This cheerful jack-o'-lantern face pairs big round eyes with a huge sweeping grin, a single pointed tooth, and playful swirl accents curling around the cheeks and brow. Every element is cut fully through, so the eyes, nose, mouth, and swirls all blaze with candlelight. The long curved swirls are the tricky part, so cut them in short passes and leave the thin bridges between shapes for last. This design is rated Advanced and takes most carvers around 150 minutes from trace to glow. Multi-layer cuts with skin-peel shading. Plan your cuts first.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 100-150 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Start with the notched nose. Cut region 1 along its angular sides, keeping the white notch connected to the face below. Approach each corner with separate short strokes.
- Preserve the round pupils. Open both regions marked 2 around their white lower pupil tabs. Each pupil stays connected to the shell below the eye. Do not cut across either attachment.
- Carve the one-tooth smile. Cut region 3 around the single rounded upper tooth. Keep the tooth joined to the upper lip. Support the mouth plug and leave a short lower-edge tab until last.
- Finish the border and curls. Cut the two small curl openings marked 4 first, followed by the crown flare and border sweeps. Preserve every white strip between openings. Work toward the pointed tips with short cuts and support each released section.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a advanced carve like this you'll want a linoleum cutter set, x-acto knife, peel tool, and pin transfer wheel. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
Expert / ProPetal Border and Button Nose
A whimsical folk-art face with pupil-in-eye ovals, arched lash brows, a button nose, and a scalloped grin full of rounded teeth, all surrounded by a lush border of petals, leaves, and teardrops. Dozens of small openings cut through, which is what earns the expert rating despite the friendly look. Work from the center of the face outward to the border so early cuts never weaken the wall around later ones.
AdvancedGoofy Pupils and Twelve Dots
A freckle-faced goofball with lifted eyebrow cuts, big eyes crossed by full-width pupil tabs, a round nose, twelve freckle dots, and a huge open grin with mismatched teeth. The openings are cut through while the pupil bars, teeth, and surrounding freckle rind stay intact. It rates hard because those wide pupil tabs span the entire eye: cut each eye as separate top and bottom windows, drill the freckles with a small round bit, and save the eyebrows for last.
AdvancedArched Pupils and Twelve Rays
This pumpkin is absolutely thrilled to see you: arched eyes with hanging pupil tabs sit above a giant grin packed with separated square teeth, while short rays burst from each cheek like cartoon sparkle lines. All the shapes cut through, and the many thin bridges between teeth and rays are why it rates hard. Cut the small ray slits first while the wall is strongest, then do the teeth, always sawing away from the narrow bridges.
IntermediateOval Eyes and Crescent Cheeks
This delighted face beams with two big oval eyes, a small triangle nose, crescent-shaped cheek accents, and an open grin showing a pair of stubby teeth, all dusted with tiny freckle holes. Every shape is pierced through, with the teeth left attached to the upper lip. Cut the delicate crescent cheeks with the tip of your saw only, since their thin curves are the easiest pieces to crack.
IntermediateOval Eyes and Eight Cheek Dots
Big oval eyes sit under arched brows above a round button nose and a broad smile showing four blunt square teeth, with four freckle dots sprinkled on each cheek. The eyes, brows, nose, mouth, and dots are pierced through while the tooth bridges stay connected. Poke the eight small cheek dots first, then cut the large features, leaving the tooth bars until the end so they keep support.
Beginner-friendlyRound and Triangle Goofy Eyes
One round eye and one sideways triangle eye give this pumpkin its delightfully goofy, mid-wink expression, finished with a huge upswept smile and two square teeth hanging from the upper lip. All shapes cut straight through for a bright, cartoonish glow. It is an easy crowd-pleaser; cut around each square tooth carefully, since they stay attached to the top of the mouth, and round off the smile's corners for extra charm.