Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
66 results · Page 1 of 2
Apple Leaf and Four Holes
A plump apple with a stem and single leaf glows at the front, trailed by a diagonal line of four round holes like tumbling seeds. The apple body, leaf, and dots are all pierced through, with the stem notch left as dark shell between them. A great pick for classrooms and teacher gifts; punch the four small holes with a corer first, then saw the apple outline in slow curves.
Arched Brows and Single Tooth
A wholesome grinning face with arched eyebrows, round eyes that keep their pupils as uncut dots, a small triangle nose, and a big open smile showing two square teeth. The brows, eye rings, nose, and mouth are pierced through while the pupils and teeth remain as attached pumpkin. Cut the eyes slowly so each floating pupil keeps a solid connecting bridge to the shell.
Arched Eyes and Six Freckles
A vintage-style pumpkin face with tall arched eyes, a triangle nose, a gap-toothed smile, and six little freckle holes dotted across the cheeks. The eyes, nose, mouth, and freckles all cut through, and each eye keeps a rooted pupil tab attached at the bottom for old-fashioned character. Drill or poke the freckles first with a small round tool, and cut toward each pupil tab's base so those thin anchors survive.
Barred Triangles and Grid Grin
A grinning classic face where each triangle eye is split by a vertical bar of rind, the diamond nose sits between rows of small diamond cheek cutouts, and the huge smile is divided into a grid of rectangular tooth windows. Everything is pierced through, creating a lantern that flickers from dozens of openings. Rated hard because those rind bars and grid struts are fragile; cut away from each bar and never twist the blade near them.
Beach Umbrella and Sun
A scalloped beach umbrella on a straight pole stands above a short shoreline bar, with a round sun cut high to one side. The umbrella canopy, pole, ground line, and sun are each fully cut out, and the scalloped edge leaves a playful fringe of skin between canopy sections. A medium carver's best move is to cut the small scallop notches before removing the big canopy piece, while the wall still has plenty of support.
Bridged Peace Sign
A bold peace symbol fills the face of the pumpkin, its glowing ring and spokes formed by cutting away the four wedge-shaped spaces between them. Thin uncut bridges hold the outer ring to the pumpkin wall, which is exactly what makes this a medium carve. Cut each wedge slowly and leave the connecting bridges at least a finger-width wide; if a spoke feels wobbly, shave it thinner from the inside rather than recutting the front.
Broad Five-Point Star
One broad five-point star fills the front of the pumpkin as a single dramatic cutout. The entire star is pierced through, leaving a clean rim of pumpkin around it, so a candle inside turns the whole shape into a lantern window. As an easy design it is ideal for beginners; draw a guide dot at each of the five points before cutting, then connect them with straight strokes so the star stays symmetrical.
Broad Grin with Five Teeth
Two chunky triangle eyes sit above a broad zigzag grin, where five blocky teeth alternate along the top and bottom of the smile. Everything cuts fully through, and the oversized features make this a great pick for a big pumpkin that needs to be seen from a distance. Carve the mouth as one long opening and leave each tooth attached to the rim, sawing the tooth notches last so they stay sturdy.
Broad Star and Two Ovals
One broad five-point star dominates the center of the pumpkin, flanked by a single round opening on each side. All three shapes are cut fully through, so the star throws bright, even light while the two dots add a playful balance. It is a quick, satisfying carve for beginners; saw each point of the star from the outer tip inward toward the center so the corners meet cleanly without overcuts.
Classic Gappy Grin
A cheerful lopsided jack-o'-lantern face with one oversized round eye, one small eye, and a huge sweeping grin showing two chunky buck teeth. The eyes, mouth, and gaps between the teeth are cut clear through so candlelight pours out, while the rest of the shell stays untouched. An easy first project: carve the big grin in short strokes and save the teeth for last so they stay firmly attached.
Classic Grin with Two Teeth
The timeless jack-o'-lantern: two triangle eyes, a triangle nose, and a wide curved grin interrupted by two chunky square teeth, one on top and one on the bottom. Every feature is pierced straight through for maximum glow. This easy pattern is the classic first carve; angle each triangle cut slightly toward the center of the shape so the plugs pop out cleanly, and leave the tooth blocks generous so they do not snap.
Crescent and Six Falling Dots
A slender crescent moon hangs in the upper corner while a diagonal trail of small round dots falls away beneath it, like fading moonlight. Each shape is pierced through, and the tiny dots do most of the sparkle work against the dark shell. For this easy pattern, punch the dots with an apple corer or drill bit for perfect circles, then saw the thin crescent in two smooth passes.
Crescent Eyes and Broad Smile
Two upswept crescent eyes squint with joy above an enormous open smile that stretches nearly the full width of the pumpkin, curling up into playful points at each corner. Just three cut-through openings make the whole face, with no nose, teeth, or fragile bits anywhere. This easy design is pure beginner fun; carve the big smile first while the wall is strongest, then the two eye crescents, angling your blade slightly outward so the pieces push free cleanly.
Crescent Eyes and Curved Smile
Pure cheer: two upturned crescent eyes squint with delight above a huge toothless smile that curls up at both corners. All three shapes are pierced through so the whole face beams with candlelight, and the matching curves give it a warm, laughing character. This easy pattern rewards smooth cutting; saw each crescent in one steady motion following the curve, and round off the smile's corners rather than leaving sharp points.
Crescent Seven Stars Six Dots
A large crescent moon glows at the left while seven chunky five-point stars and six round dots scatter across the rest of the pumpkin like a full night sky. Every moon, star, and dot is pierced through, so the whole surface twinkles when lit. Space your cuts out as you go, alternating sides of the pumpkin, so the wall keeps its strength until the final star is freed.
Crescent Sun and Three Dots
A slim crescent moon faces a round sun ringed by teardrop-shaped ray openings, with a trail of three dots descending below the sun. Every element is pierced through, and the varied hole sizes give the lit pumpkin a layered celestial sparkle. Drill or poke the three small dots first while the wall is still rigid, then cut the teardrops, and save the big crescent and sun circle for last.
Cross in an Oval Ray Field
An ornate flared cross stands at the center of an oval field of sunburst rays that radiate outward to the design's edge. It is carved entirely in continuous-wall relief: the cross is left raised with beveled edges while the rays are shaved to alternating depths so light plays across the whole medallion. This hard shading piece rewards patience, so establish the cross outline deep and clean first, then carve every ray from the cross outward to keep the bevels crisp.
Cross With Ten Rays
A bold cross anchors the center of the design while ten tapered rays burst outward around it like beams of light. The cross and every ray are pierced through, leaving dark shell between them that frames the radiating pattern. Cut the large cross first to relieve pressure on the wall, then work each ray from its wide outer end toward the narrow tip so the points finish clean.
Diamond Nose and Three Teeth
This is the timeless jack-o'-lantern: two triangle eyes, a diamond nose, and a wide crescent grin interrupted by three blocky square teeth, one hanging from the top lip and two rising from the bottom. Everything except the teeth is cut through, with the teeth left as standing tabs of shell. It is an easy, forgiving first carve; cut toward each tooth from both sides rather than sawing across it, so the tabs never take sideways pressure.
Double Bars and Zigzag Teeth
An elaborate jack-o'-lantern face built from layered geometry: triangle eyes barred with double rind strips, arched claw-like brows, diamond accents down the cheeks, and a wide zigzag mouth of interlocking teeth flanked by curling flame flourishes. The many openings are cut through around a lattice of thin surviving rind. This expert design demands a sharp fine-tooth saw and a plan: cut from the center outward, finishing the outer flourishes last while the wall is still strong.
Four-Arch Rainbow
Four nested rainbow arches glow from the lower half of the pumpkin, each band separated by a strip of untouched shell. The arch openings are cut all the way through while the curved ribs between them stay in place to define the rainbow shape. Start with the smallest inner arch and work outward so the narrow ribs keep their support as long as possible.
Layered Compass Star Relief
A layered compass-rose mandala: an eight-point star nests inside a larger star, all wrapped in a ring of carved circles and framed by a shaved border medallion. The entire design is relief work at several depths with no pierced openings, which is why it rates expert. Establish the shallowest background layer first, then step each inner layer progressively deeper so the star points read as crisp raised facets.
Leaning Eyes and Square Teeth
The timeless jack-o'-lantern: two leaning triangle eyes, a triangle nose, and a huge crescent grin interrupted by two blocky square teeth, one up and one down. Everything is a straightforward cut-through, which is exactly why this face has been a first-timer favorite for generations. Cut the mouth last and leave the tooth tabs generous; you can always trim a tooth thinner, but you cannot put pumpkin back.
Lightning Bolt and Two Stars
A big lightning bolt zigzags down the center of the pumpkin, surrounded by two five-point stars and a scatter of round dots. Every shape is cut clean through, so the bolt blazes with candlelight while the stars and dots sparkle around it. The bolt is one straightforward opening with sharp interior angles; make a small relief cut at each zigzag corner so the blade can pivot without cracking the rind.
Long Oval Surprise Face
Two round eyes, a small triangle nose, and a tall oval mouth give this design a permanently startled expression, sized for long narrow pumpkins. Just four openings are cut through, which is why it works so well for beginners and quick porch displays. Scoop the big oval mouth in stages rather than one deep cut, and the tall shape will stay smooth from top to bottom.
Moon Profile and One Star
A serene man-in-the-moon profile fills a broad crescent, his closed-eye face, nose, and lips sculpted in layered relief within the shaved moon shape, while a single five-pointed star glows beside him. The moon is carved as continuous-wall shading at multiple depths and only the star area is thinned to shine brightest. This expert piece is all about depth control; rough in the crescent first, then sculpt the facial features gradually, checking the glow with a light as you go.
Nine Triangles and Six Dots
Nine triangles in alternating sizes form a tidy three-by-three grid, with six small round dots tucked into the gaps between rows. Each triangle and dot is cut straight through, producing a clean modern lantern that glows like patterned tilework. This medium design is all about alignment, so tape the template securely, transfer every corner point before cutting, and carve the triangles row by row to keep the grid looking sharp and even.
Peaked Eyes and Offset Teeth
A timeless porch jack-o'-lantern with peaked half-round eyes, a triangle nose, and a broad smile broken by offset square teeth on the top and bottom lip. Every element is a full cut-through, so it lights up brilliantly at dusk. Cut the mouth last and remove it in tooth-sized sections; sawing the whole smile as one piece puts stress on the little tooth tabs.
Pineapple with Split Crown
A plump pineapple with a dramatic split crown of long, splayed leaves and a body filled with a deep diamond crosshatch pattern. The whole design is skin-shave work: leaves and body are peeled to bright flesh while crosshatch grooves are cut deeper for a woven texture. Score the diamond grid lightly with a ruler-guided knife before carving so the lattice stays even across the pumpkin's curve.
Plain Cross with Nine Rays
A plain cross stands at the center while nine tapered rays of light fan outward around it, like a sunburst breaking through. This shaded design is carved on a continuous wall, shaving the skin away so the cross and rays glow warmly with no pierced openings, which suits a reverent, softer look. Shave the cross to an even depth first, then taper each ray shallower toward its tip so the light appears to fade outward.
Plain Fire Helmet Silhouette
A traditional firefighter helmet in bold silhouette, showing the raised front shield, domed crown, and long swooping rear brim that flares out to protect the neck. The entire helmet is cut through as one large opening, so it glows as a single unmistakable emblem. This easy tribute carve works great on a big pumpkin; cut the long brim curve in one slow continuous pass to keep its sweep smooth.
Radiant Cross and Lower Leaves
An ornate flared cross rises from a bed of scrolling leaves while sunburst rays fan out behind every arm, all carved in layered relief. Nothing pierces the wall: the cross, rays, and foliage are shaved at multiple depths so the design reads as glowing sculpture with crisp raised borders. This expert shading project demands patience, so map your three depth levels first and always carve the background rays before refining the cross's beveled edges.
Rainbow and Two Clouds
A four-band rainbow arches across the top of the design, with two puffy clouds floating beneath its ends. Each rainbow band and both clouds are cut fully through, so the concentric arcs glow in bright stacked stripes separated by thin ribs of rind. This medium pattern lives or dies by those ribs, so cut the innermost arc first and work outward, supporting each rib with your free hand as you remove the waste.
Round Eyes and Broad Crescent
Two big round eyes and one broad crescent smile make up this whole cheerful design, glowing warm amber against the shell. All three shapes are cut cleanly through with no teeth or interior details, so the face works on any pumpkin color, and it looks especially striking on a blue or white heirloom variety. As an easy carve, use a round cookie cutter or drill bit to keep the eyes perfectly circular, then saw the wide grin in two relaxed passes.
Round Eyes and Button Nose
Two round glowing eyes, a tiny button nose, and one big sweeping smile give this pumpkin the friendliest face on the block. All four openings are cut straight through, with no teeth, brows, or tricky details to manage. It is about as easy as carving gets, ideal for a toddler's first pumpkin with adult hands on the saw; drill the eyes and nose with a round cutter, then take the long smile in one smooth curve from corner to corner.
Round Eyes and Kitchen Smile
A pair of perfectly round eyes and a gentle upturned smile give this pumpkin a warm, welcoming look that fits right in on a kitchen table or windowsill. Both eyes and the smile are simple cut-through openings with soft curves and zero fragile pieces. This easy design shines on smaller pie pumpkins; scoop the walls a little thinner than usual on a small fruit so a battery tea light can still glow brightly through the modest openings.