Similar to This
View all stencils →About this stencil
A plump pineapple with a dramatic split crown of long, splayed leaves and a body filled with a deep diamond crosshatch pattern. The whole design is skin-shave work: leaves and body are peeled to bright flesh while crosshatch grooves are cut deeper for a woven texture. Score the diamond grid lightly with a ruler-guided knife before carving so the lattice stays even across the pumpkin's curve. This design is rated Advanced and takes most carvers around 150 minutes from trace to glow. Multi-layer cuts with skin-peel shading. Plan your cuts first.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a continuous-wall shading design: you never cut all the way through the pumpkin. On the printable pattern, light gray regions get just the skin shaved off for a faint glow, dark gray regions are scraped deeper so more light comes through, and white areas keep their skin untouched. The numbers give you the safest working order. Plan on about 2-3 hours from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the wall to about 1 inch behind the design so light can pass through the shaded areas. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer the outlines by poking dots along every line. Work with a loop tool, clay ribbon scraper, or the back of a spoon rather than a saw.
Shading order
- Scrape crown and cells (1). Scrape every gray region shallowly. The front crown spear is marked 1. Follow the split upper crown and three fanning leaves on each side. Scrape all irregular diamond cells below it, preserving the white lattice and background.
- Brighten the fruit cells (2). Deepen each dark-gray cell center; a broad middle example is marked 2. Keep the pale cell borders and every crown leaf shallow. Edge cells are partial shapes, following the curved fruit outline. Do not join cells across their retained white dividers.
Check your progress often: set a bright LED inside and dim the room lights, and the glow shows exactly where to scrape deeper. Go slowly near thin spots and stop before the wall flexes; a pierced wall cannot be undone.
Tools you'll need
For a advanced carve like this you'll want a linoleum cutter set, x-acto knife, peel tool, and pin transfer wheel. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
Expert / ProFour Woodland Toadstools
Four spotted woodland toadstools cluster among curling leaves and grasses, carved in deep relief so the caps, gills, and stems stand out from the shell in true sculptural layers. Nothing is pierced; the design is built entirely by shaving and sculpting the wall to different depths, with the tall center mushroom's gilled underside as the showpiece. Rough out the deepest background first, then refine the gill lines last with a V-gouge while the ridges are still thick.
Expert / ProFour Spotted Toadstools
Four spotted toadstools of staggered heights grow from a glowing patch of grass, the tallest cap arching over three smaller companions. This expert shading piece uses multiple depths: gills under the big cap are shaved brightest, stems and caps sit mid-tone, and the spots are left as darker raised dots. Map your depth levels before touching a tool, and carve the delicate gill lines with a fine gouge in single confident strokes.
IntermediateEight Petals and Three Seeds
Eight oval petals radiate from a dotted center like a stylized sunflower, with three small seed holes in the middle and a leafy stem opening anchoring the bloom below. Each petal is a pierced oval, and the skin spokes left between them hold the flower together while letting light pour through. Cut opposite petals in pairs, top then bottom, left then right, so the spokes never take uneven strain.
Expert / ProSunflower with a Curled Center
A show-stopping sunflower with two rings of layered petals around a big textured seed head, flanked by veined leaves below. This expert shading piece uses multiple depths: petals shaved smooth, petal shadows cut deeper where layers overlap, and the center stippled with dozens of tiny seed dimples. Rough in all the petal shapes at one shallow depth first, then return to carve the overlaps, saving the seed texture for last.
Expert / ProSunflower with Layered Petals
A lush sunflower filling the pumpkin face, with a densely dotted seed head ringed by two overlapping layers of pointed petals and broad leaves fanning out below. It is carved entirely as continuous-wall relief, shaving the skin at multiple depths so petals overlap realistically with no pierced openings. As an expert project, plan your levels first: deepest around the outer background, shallower between petal layers, and the seed dome nearly untouched.
AdvancedDragonfly with Reeds
A dragonfly hovers with all four veined wings spread wide, its long segmented tail trailing down among slender reed grasses and cattails. The whole scene is shave-carved: wings, body, and reeds glow through thinned skin while the background stays dark, with no pierced holes. The wing veining is the payoff detail, so shave each wing smooth first, then score the vein lines lightly with a knife tip rather than gouging them.