Similar to This
View all stencils →About this stencil
A game-night still life in deep relief: a tipped-over cup spills three pip-dotted dice across a carved tabletop while a rounded pawn stands nearby on its base. Everything is continuous-wall sculpting with no pierced holes, using multiple shaved depths to make the cup, dice faces, and pawn read as three-dimensional objects. As an expert relief carve, block in the deepest background plane first, then step each object forward in layers, cutting the tiny pips last with a round gouge. This design is rated Expert / Pro and takes most carvers around 240 minutes from trace to glow. Sculpting-grade work. Three or more depth layers, fine detail.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a expert / pro carve like this you'll want a full ribbon tool set, clay sculpting loops, x-acto knife, and dremel (optional). Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
AdvancedPineapple with Layered Crown
A plump pineapple with a full crown of layered, curling leaves and a body covered in the fruit's signature diamond lattice texture. It carves as continuous-wall relief: the fruit is shaved into the skin at different depths so the crosshatched skin and overlapping leaves stand out dimensionally, with nothing cut through. This hard design goes smoothest if you carve the diamond grid with two sets of parallel angled grooves before shaping each leaf individually.
IntermediateDie and Pawn on Curved Board
A six-sided die and a classic rounded game pawn sit side by side on a curved, segmented game board path. The die faces, pawn silhouette, and board track are shave-carved so they glow in warm relief, with the pips scooped deeper for contrast; nothing pierces the wall. Shade the two big shapes first, then dot in the pips with a small round gouge, keeping each one the same depth so the die reads evenly.
IntermediateBridged Peace Sign
A bold peace symbol fills the face of the pumpkin, its glowing ring and spokes formed by cutting away the four wedge-shaped spaces between them. Thin uncut bridges hold the outer ring to the pumpkin wall, which is exactly what makes this a medium carve. Cut each wedge slowly and leave the connecting bridges at least a finger-width wide; if a spoke feels wobbly, shave it thinner from the inside rather than recutting the front.
IntermediateGear Cross and Three Dots
A chunky steampunk gear glowing around a solid crossbar, with three round rivet dots floating beside it like escaping sparks. The spaces between the gear teeth and the four windows inside the cog are cut through, while the cross-shaped bar stays attached to the pumpkin wall and holds everything together. Carve the small dots first, then the gear windows, and keep the crossbar at least a finger wide so the design stays rigid.
IntermediateSeven-Leaflet Cannabis Leaf
A symmetrical seven-leaflet cannabis leaf spread across the pumpkin's face, each serrated blade radiating from a short central stem. The leaf glows through shaved skin rather than open holes, so every jagged tooth along the edges reads clearly while the wall stays solid. A medium shading design; score the full outline first, then peel from the center of each leaflet outward so the serrations do not tear. Best saved for the adults-only party pumpkin.
AdvancedDice and a Toppled Pawn
A dice cup tips over spilling three pip-marked dice across the scene while a toppled game pawn lies nearby in a glowing puddle of lantern light. This shading design is carved entirely by shaving the skin: the cup, dice faces, pawn, and spill area are scraped to different depths while the pip dots stay dark as untouched rind. Rated hard, keep each die's edges square with straight guide cuts before shaving so the cubes stay convincing.