Similar to This
View all stencils →About this stencil
A fully decorated Christmas tree rises from a cluster of wrapped presents, complete with beaded garland swags, patterned ornaments, and a star on top. The entire scene is skin-shave shading with no pierced openings; the tree and gifts are peeled pale while the garland beads and ornament patterns stay dark and raised. Shave the broad tree tiers first, then switch to a fine tool for the garland dots and bows. This design is rated Expert / Pro and takes most carvers around 240 minutes from trace to glow. Sculpting-grade work. Three or more depth layers, fine detail.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a expert / pro carve like this you'll want a full ribbon tool set, clay sculpting loops, x-acto knife, and dremel (optional). Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
Expert / ProRaw Fir with Glowing Ornaments
A fully decorated Christmas tree rises from a pile of wrapped presents, hung with round ornaments, a bell, beaded garland swags, and a star topper at its peak. The scene is shaved into the pumpkin wall at multiple depths, with the ornaments and gift boxes thinned brightest while the boughs stay as dark raised skin. Block in the tree's triangle first, then carve each bough layer top to bottom so the branches overlap naturally.
Beginner-friendlyThree-Tier Pine Tree
A stately three-tier pine tree with swooping boughs and a short trunk base, cut fully through so the whole evergreen glows like a lantern. The layered branches create six pointed tips where each tier sweeps upward. Cut from the trunk upward one tier at a time, and slow down at every branch point so the tips stay sharp instead of rounding off.
IntermediateSix Stars and Seven Dots
Six five-pointed stars and seven round dots scatter across the pumpkin like glowing confetti, wrapping around the sides rather than clustering on one face. Every star and dot is cut fully through, turning the whole pumpkin into a lantern that throws starlight in all directions. This medium all-over pattern is extra charming on a warty or bumpy pumpkin; drill the dots first, then cut each star point to point, rotating the pumpkin so you always saw at a comfortable angle.
Beginner-friendlyKansas Heart Lettering
A glowing I, a full heart, and the letters K and S stacked beneath, spelling out love for Kansas in chunky serif type. All four elements are simple cut-throughs, which keeps this one easy despite looking polished. Transfer the pattern carefully so the letters stay level, cut each letter's inside corners with the tip of the saw, and open the big heart last since it is the largest and most forgiving shape.
Expert / ProCrossed Sticks at Forest Rink
Two crossed hockey sticks with taped blades dominate a full outdoor rink scene, complete with a puck at center ice, board fencing, evergreen trees, and distant peaks behind. It is carved entirely by shading: skin is shaved to different depths so the sticks, boards, and treeline glow in layered tones with no pierced holes. Map out three depth levels before you start and shave the brightest areas thinnest, checking often with a light inside.
IntermediateWest Virginia Heart Lettering
Bold serif letters spell out I, a big solid heart, then W and V stacked below, the classic hometown-pride message carved in light. Each letter and the heart are cut fully through, glowing like marquee type against the dark pumpkin. Serif letters have thin corner strokes, so cut the serifs first with the knife tip before opening the thick strokes, and keep the wall between W and V at least a half inch wide.