Similar to This
View all stencils →About this stencil
A chunky steampunk gear glowing around a solid crossbar, with three round rivet dots floating beside it like escaping sparks. The spaces between the gear teeth and the four windows inside the cog are cut through, while the cross-shaped bar stays attached to the pumpkin wall and holds everything together. Carve the small dots first, then the gear windows, and keep the crossbar at least a finger wide so the design stays rigid. This design is rated Intermediate and takes most carvers around 75 minutes from trace to glow. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediateFive Star Band and Ten Circles
Designed for a long pumpkin lying on its side, this pattern runs a band of five bold stars across the middle with ten round holes scattered above and below like floating orbs. Every star and circle is a simple cut-through, and the sideways layout makes it a fun tabletop centerpiece instead of an upright face. At medium difficulty the stars are the focus: poke each star's five points before cutting so the angles meet sharply.
IntermediateBridged Peace Sign
A bold peace symbol fills the face of the pumpkin, its glowing ring and spokes formed by cutting away the four wedge-shaped spaces between them. Thin uncut bridges hold the outer ring to the pumpkin wall, which is exactly what makes this a medium carve. Cut each wedge slowly and leave the connecting bridges at least a finger-width wide; if a spoke feels wobbly, shave it thinner from the inside rather than recutting the front.
Expert / ProCup, Three Dice and a Pawn
A game-night still life in deep relief: a tipped-over cup spills three pip-dotted dice across a carved tabletop while a rounded pawn stands nearby on its base. Everything is continuous-wall sculpting with no pierced holes, using multiple shaved depths to make the cup, dice faces, and pawn read as three-dimensional objects. As an expert relief carve, block in the deepest background plane first, then step each object forward in layers, cutting the tiny pips last with a round gouge.
IntermediateSix Stars and Seven Dots
Six five-pointed stars and seven round dots scatter across the pumpkin like glowing confetti, wrapping around the sides rather than clustering on one face. Every star and dot is cut fully through, turning the whole pumpkin into a lantern that throws starlight in all directions. This medium all-over pattern is extra charming on a warty or bumpy pumpkin; drill the dots first, then cut each star point to point, rotating the pumpkin so you always saw at a comfortable angle.
IntermediateEight Teardrops Around Circle
Eight teardrop petals radiate around a central circle cutout, like a glowing daisy or sunburst wheel. Every teardrop and the center are pierced clean through, turning the pumpkin into a lantern that throws petal-shaped light across the porch. Cut the center circle first as your anchor point, then work around the ring, alternating sides so the wall stays balanced as you go.
AdvancedBarred Eyes and Diamond Dots
A wildly ornate astonished face: two huge round eyes split by vertical bars, a tall oval mouth gaping in shock, and a halo of diamonds, dots, and curved flourishes radiating in every direction. All of it is cut through, from the barred eyes to the smallest accent dot, so the whole pumpkin erupts in patterned light. Rated hard for its piece count, work from the center outward and leave the outer diamonds and dots for the final pass.