Similar to This
View all stencils →About this stencil
A dragonfly hovers with all four veined wings spread wide, its long segmented tail trailing down among slender reed grasses and cattails. The whole scene is shave-carved: wings, body, and reeds glow through thinned skin while the background stays dark, with no pierced holes. The wing veining is the payoff detail, so shave each wing smooth first, then score the vein lines lightly with a knife tip rather than gouging them. This design is rated Advanced and takes most carvers around 150 minutes from trace to glow. Multi-layer cuts with skin-peel shading. Plan your cuts first.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a advanced carve like this you'll want a linoleum cutter set, x-acto knife, peel tool, and pin transfer wheel. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
Expert / ProWide-Eyed Owl on a Branch
A magnificent wide-eyed owl perched on a curving branch, rendered in layered relief: feathered brow tufts, a sharp beak, ringed eyes, overlapping wing feathers, and a scalloped breast. Nothing is pierced; the entire portrait is carved by shaving the skin to varying depths so backlight grades from bright to dim across the feathers. This is expert work, so sharpen your loop tools, carve the deepest layers around the eyes first, and build the feather texture in shallow passes.
IntermediateBee with Three Raw Stripes
A friendly bumblebee spreads four scalloped wings wide, with a round head, curled antennae, and a plump body banded by three raw stripes. This is a shading design with no pierced holes: the wings, head, and body stripes are shaved down to pale flesh while strips of dark skin form the outlines and bands. Shave the big wing panels first, then refine the narrow antennae with a small gouge.
AdvancedPineapple with Split Crown
A plump pineapple with a dramatic split crown of long, splayed leaves and a body filled with a deep diamond crosshatch pattern. The whole design is skin-shave work: leaves and body are peeled to bright flesh while crosshatch grooves are cut deeper for a woven texture. Score the diamond grid lightly with a ruler-guided knife before carving so the lattice stays even across the pumpkin's curve.
AdvancedCloudy Moon Campsite
A cozy campsite spreads across the pumpkin: a striped A-frame tent between pine trees, a crackling campfire, and a full moon drifting behind wispy clouds. The scene is shaved into the skin rather than pierced, so light glows softly through the thinned areas at different strengths. For this hard shading job, carve the brightest spots like the fire and moon deepest, and keep the trees and clouds shallower to build a layered nighttime look.
IntermediateMoonlit Tent & Campfire
A cozy campsite scene: a peaked tent with an open door flap, a crackling campfire on crossed logs, two pine trees, and a full moon overhead. It is all continuous-wall shading, so you shave each shape down to glowing flesh while the orange skin between them stays untouched. Etch the largest areas like the tent walls first, then refine the flame tips and pine branches with a small gouge for clean edges.
Beginner-friendlyThree Mountains and Moon
A minimalist night landscape made of three simple triangle peaks in a row with a full round moon floating above them. Each triangle and the circle are cut cleanly through, turning the pumpkin into a tiny glowing mountain scene. This is one of the easiest patterns to carve; keep the triangle points sharp by cutting into each corner from both directions instead of turning the blade.