Pumpkin carving templates
1159 free printable stencils. Download, print, trace, carve.
27 results · Page 1 of 1
Apple Leaf and Four Holes
A plump apple with a stem and single leaf glows at the front, trailed by a diagonal line of four round holes like tumbling seeds. The apple body, leaf, and dots are all pierced through, with the stem notch left as dark shell between them. A great pick for classrooms and teacher gifts; punch the four small holes with a corer first, then saw the apple outline in slow curves.
Beaver & Crosshatched Tail
A sturdy beaver stands in profile with its famous flat tail fanned behind it, the tail filled with a crosshatched diamond pattern and a tiny buck tooth showing at the mouth. The design is carved as a relief, shaving the outline and detail lines into the skin without piercing the wall, so it reads beautifully even unlit. Score the crosshatch grid lightly first, then deepen each groove one pass at a time.
Broad Autumn Leaf
A single broad maple-style leaf glows from the pumpkin's face, its rounded lobes and short stem cut fully through as one connected opening. The design leans seasonal rather than spooky, making it a lovely choice for fall porches from October through Thanksgiving. As an easy one-piece cutout, just poke transfer dots along the lobed outline, saw slowly around each curve, and push the waste piece out from inside in a single pop.
Broad Cap Mushroom
A single broad-capped mushroom with a sturdy stem glows from the center of the pumpkin in this cozy woodland design. The whole mushroom is removed as one connected cutout, cap and stem together, so there are no fragile bridges to protect. That makes it a great easy project for porch-step decorating; cut the smooth dome of the cap in one continuous pass, then square off the stem base last for a clean silhouette.
Cornucopia Pumpkin Stencil
A harvest cornucopia brimming with a small pumpkin, an apple, and assorted gourds fills this pumpkin stencil, with decorative swirling vines and leaf shapes radiating outward from the basket's opening. The woven horn body is built from curved concentric stripe cutouts, while the produce and vine scrolls are independent pierced-through elements against the solid surrounding wall. Cut the small vine scroll tips and round fruit openings before tackling the long curved stripe cuts in the horn body, as the stripe cuts pass close to each other and benefit from the surrounding wall being intact.
Eight Petals and Three Seeds
Eight oval petals radiate from a dotted center like a stylized sunflower, with three small seed holes in the middle and a leafy stem opening anchoring the bloom below. Each petal is a pierced oval, and the skin spokes left between them hold the flower together while letting light pour through. Cut opposite petals in pairs, top then bottom, left then right, so the spokes never take uneven strain.
Five-Petal Flower and Scrolls
An expert-level layered blossom: five broad veined petals fan around a raised dotted center, wrapped in overlapping leaves and curling scrolls that spill toward the pumpkin's edges. It is entirely surface work, shaving the skin at many depths with nothing cut through, so it looks striking even in daylight on a fall porch. Sharpen your gouges and work from the deepest petals outward, layer by layer.
Four Spotted Toadstools
Four spotted toadstools of staggered heights grow from a glowing patch of grass, the tallest cap arching over three smaller companions. This expert shading piece uses multiple depths: gills under the big cap are shaved brightest, stems and caps sit mid-tone, and the spots are left as darker raised dots. Map your depth levels before touching a tool, and carve the delicate gill lines with a fine gouge in single confident strokes.
Four Woodland Toadstools
Four spotted woodland toadstools cluster among curling leaves and grasses, carved in deep relief so the caps, gills, and stems stand out from the shell in true sculptural layers. Nothing is pierced; the design is built entirely by shaving and sculpting the wall to different depths, with the tall center mushroom's gilled underside as the showpiece. Rough out the deepest background first, then refine the gill lines last with a V-gouge while the ridges are still thick.
Grimacing Scarecrow Pumpkin Stencil
A simple, cartoonish scarecrow stands with arms outstretched on this hard pumpkin stencil, wearing a wide-brimmed hat and showing a squiggly grimace for a mouth. The body and hat are solid pumpkin flesh while gaps between the outstretched arms, the ragged tunic slashes, and the stick post below are all cut through. The thin neck post connecting the head to the body is the most fragile element; complete all arm and tunic cuts before touching the area around that connector to keep the head from separating prematurely.
Maple Leaf and Twelve Diamonds
A big pointed maple leaf glows at the center while twelve small diamonds ring it like sparks, giving the design a festive burst of fall energy. The leaf and every diamond are cut completely through, so the whole arrangement shines as one radiant cluster. At medium difficulty, carve the maple leaf's deep notches with straight relief cuts into each valley, then finish the diamonds last since their small size makes them quick and forgiving.
Maple Leaf Pumpkin Stencil
A single large maple leaf fills most of the stencil, tilted slightly to the right with its stem curving down and left. The leaf has seven pointed lobes with gently serrated edges and a central vein ridge left solid, creating a two-section open cut on each side of the midrib. Lit from inside, the two halves of the leaf glow symmetrically while the narrow central vein remains as an unlit orange line. Keeping that vein bridge intact is the key structural challenge: cut the left lobe section completely before moving to the right so you're never cutting beside an already-open neighbor.
Pineapple with Split Crown
A plump pineapple with a dramatic split crown of long, splayed leaves and a body filled with a deep diamond crosshatch pattern. The whole design is skin-shave work: leaves and body are peeled to bright flesh while crosshatch grooves are cut deeper for a woven texture. Score the diamond grid lightly with a ruler-guided knife before carving so the lattice stays even across the pumpkin's curve.
Scarecrow Face Pumpkin Stencil
Two large round eyes with small eyebrow hooks above each, a pair of pointed teardrop nostrils, and a wide toothy grin with sharp downward-pointing fangs give this scarecrow face its slightly sinister character on this easy pumpkin stencil. All cut pieces are chunky and well-separated, making this a comfortable carve despite its spooky look. To keep the row of fang tips from chipping, make the two vertical cuts on each fang before the horizontal base cut that frees the piece.
Scarecrow Pumpkin Stencil
A friendly scarecrow stands arms-out in classic T-pose: a brimmed hat with a small torn-corner flap, a round face with X eyes and a stitched-line smile, a necktie, straw tufts poking from the sleeves and hem, and a central post below the body. The design uses a mix of open cuts for the background spaces and solid orange bridges that form the straw strands, clothing triangles, and facial features. When lit, the scarecrow appears as a warm silhouette with the straw tufts back-lit individually. Cut the small X-eye shapes and the stitched smile first, as these tiny marks are hardest to control once surrounding material is removed.
Six-Leaf Tree
A slender trunk rises from a curved ground line and branches into six almond shaped leaves, three on each side, each one a separate glowing opening. The trunk, leaves, and base arc are all cut through while the space between them stays solid, so the tree reads clearly from across the yard. Carve the leaves from the center outward and leave the narrow branch junctions for last on this medium design.
Sixteen-Petal Sunflower
A sixteen-petal sunflower blooms across the whole face of the pumpkin, complete with a dotted seed head, layered leaves, and a curving stem. This is a skin-shave design: you peel the skin inside every petal and leaf while leaving orange outlines and vein lines untouched, so no light shines through. Sharpen your tools before starting and shave the big petals in long strokes from base to tip for smooth, even texture.
Standing Duck with Webbed Feet
A standing duck in profile, from its rounded bill down to its webbed feet, with layered feather detail across the folded wing and breast. This is a skin-shaving pattern rather than a pierced one: the duck's body is etched to glow while the surrounding skin stays dark, and feather lines are scored deeper for texture. Shave the broad body areas first, then add the fine feather strokes last so a slip cannot erase your detail work.
Sunflower with a Curled Center
A show-stopping sunflower with two rings of layered petals around a big textured seed head, flanked by veined leaves below. This expert shading piece uses multiple depths: petals shaved smooth, petal shadows cut deeper where layers overlap, and the center stippled with dozens of tiny seed dimples. Rough in all the petal shapes at one shallow depth first, then return to carve the overlaps, saving the seed texture for last.
Sunflower with Eleven Petals
A tall sunflower blooms across the whole pumpkin face, with eleven glowing petals radiating around a dark seed disc dotted with tiny pinprick holes, plus a straight stem and two leaves below. The petals, stem, and leaves are shaved to the flesh rather than pierced, while the seed dots are drilled through for sparkle. For this medium shading design, etch all the petal outlines first, then peel each petal evenly and finish by drilling the seed dots in a loose spiral.
Sunflower with Layered Petals
A lush sunflower filling the pumpkin face, with a densely dotted seed head ringed by two overlapping layers of pointed petals and broad leaves fanning out below. It is carved entirely as continuous-wall relief, shaving the skin at multiple depths so petals overlap realistically with no pierced openings. As an expert project, plan your levels first: deepest around the outer background, shallower between petal layers, and the seed dome nearly untouched.
Three Leaves With Kept Veins
Three oak-style leaves tumble down the tall face of the pumpkin, each one cut through around its lobed outline while a central vein of rind is kept intact up the middle. Those uncut vein strips split each glowing leaf in two and give the design its realistic structure. The veins are also the fragile part of this medium carve, so cut each leaf as two separate halves on either side of the vein and never pry against the strip itself.
Three Maple Leaves and Dots
Three maple leaves drift diagonally down the pumpkin, each one cut fully through with its stem, and small round holes scattered between them like floating seeds. The pierced leaves throw crisp, recognizable maple silhouettes of light, making this a lovely all-autumn design rather than a strictly Halloween one. Saw each leaf point from the tip inward and remove the waste in sections so the notched edges stay sharp.
Three Spotted Mushrooms
Three spotted toadstools rise from a tuft of grass, one tall cap flanked by two smaller mushrooms. This is a shading pattern: you shave away the skin around the stems and caps so they glow softly, while the round spots are scraped a touch deeper for contrast. Nothing is pierced through, which keeps the pumpkin sturdy. Work in shallow layers and stop when light just starts to show through the wall.
Turkey Pumpkin Stencil
A plump, strutting turkey faces forward with wings spread and fan tail displayed on this expert-level animal pumpkin stencil. The design is a dense interlocking map of curved feather sections, body masses, and a detailed head with wattle, all separated by thin white bridges that must stay solid. Because so many narrow bridges cross each other, work from the outermost tail feather tips inward toward the body, removing each isolated section fully before moving to the next rather than skipping around.
Two Maple Leaves Pumpkin Stencil
Two maple leaves are shown on the same stencil sheet, stacked vertically: the upper leaf faces right with its stem pointing up, the lower leaf faces left with its stem trailing down. Both are cut as single solid silhouettes with the pointed maple-lobe edges forming the outline. Lit from inside, the two glowing leaf shapes overlap slightly at center, giving the pumpkin a layered, scattered-leaves feel. Carve the upper leaf first and fully remove it before starting the lower leaf so the two openings don't inadvertently merge along their closest edges.
Two Unequal Oak Leaves
Two oak leaves of different sizes drift diagonally across the pumpkin, their lobed edges captured in crisp detail. Both leaves are cut fully through the wall, so each one glows like a lantern-lit leaf caught mid-fall. This medium design's challenge is the wavy lobed outline, so use a fine-tooth saw and pivot at every lobe notch, removing each leaf in two or three pieces instead of forcing out one large chunk.