Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
220 results · Page 3 of 7
Heavy Brows and Stitched Smile
Sharp slanted eyes glare from under heavy brows above a narrow triangle nose and a long menacing grin lined with thin vertical teeth. The eyes, nose, and mouth are cut through, and the row of skinny tooth bridges is what earns the hard rating. Cut the mouth outline first, then remove the gaps between teeth one at a time so the fragile strips never take sideways pressure.
Heavy-Brow Angry Face
This scowling jack-o'-lantern glares out through heavy slanted brows, a small triangle nose, and a snarling mouth ringed with sharp fangs top and bottom. Every feature is a pierced opening, leaving thick pumpkin wall between the angry eyes and the jagged mouth for strength. At medium difficulty the narrow inner brow points are the fragile spots, so cut the eyes from the center outward and save the thin corners for last.
I Love Alabama Pumpkin Stencil
This Alabama pumpkin stencil spells out the classic "I Love" message using a bold block letter I, a large solid heart, and the two-letter state abbreviation AL set in rounded block type. All four shapes are cut through as separate open pieces, so the finished jack-o-lantern shows glowing letters and a bright heart on an orange field. Because the A has a triangular counter at its center, cut around that interior triangle carefully so it stays in place as a solid island that keeps the letter readable.
I Love Maine Pumpkin Stencil
This Maine pumpkin stencil carves the bold "I [heart] ME" layout made famous by state-pride apparel: a tall serif "I" and a large smooth heart sit above the wide two-letter abbreviation "ME" in chunky rounded type. All four shapes are fully pierced through, so the jack-o-lantern glows with bright, clean cutouts against the orange wall. Because the heart is the largest single opening, carve it last to preserve structural support while you work through the tighter letter forms first.
I Love Maryland Pumpkin Stencil
Built on the classic "I Love" tourist-logo format, this Maryland pumpkin stencil shows a small serif "I", a large smooth heart, and the bold two-letter abbreviation "MD" in blocky rounded type arranged in a two-row grid. All shapes are cut through entirely, giving the finished jack-o-lantern high contrast against candlelight. The "D" has an open interior, so keep your blade angled slightly inward on that curve to prevent the narrow outer wall from cracking.
I Love Michigan Pumpkin Stencil
A Michigan pride pumpkin stencil featuring the two-row "I [heart] MI" layout: a slim upright "I", a large rounded heart, and the state abbreviation "MI" in wide rounded caps. All three elements are cut completely through, producing bold backlit glyphs on a carved jack-o-lantern. The letter "I" in "MI" is a narrow vertical bar, so take short, controlled strokes with your carving tool to keep both long edges clean and parallel.
I Love Mississippi Pumpkin Stencil
This Mississippi pumpkin stencil displays the crowd-pleasing "I [heart] MS" grid, with a tall slab-serif "I", a large smooth heart, and the rounded-type abbreviation "MS" in the lower row. All shapes are fully cut through for a clean, glowing jack-o-lantern face. The sweeping curves of the "S" require smooth, continuous saw strokes rather than short choppy cuts, so keep your blade moving steadily all the way through each curve to avoid a jagged edge.
I Love Montana Pumpkin Stencil
Montana's pumpkin stencil brings the "I [heart] MT" message to life with an airy two-row grid: a slim "I", a broad heart, and the state abbreviation "MT" in bold rounded letterforms. Every element is pierced through cleanly for a bright, full-glow jack-o-lantern. The cross-bar on the "T" is a thin horizontal strip bridging two open voids, so carve it last and use a fine-pointed blade to sever the bar from the surrounding pumpkin skin without flexing it too far.
I Love North Dakota Pumpkin Stencil
North Dakota's pumpkin stencil delivers the "I [heart] ND" message in bold rounded type across two rows, the heart flanked by a slender "I" above and the letters "ND" below. The "D" is an upright with a large curved lobe on the right, and its wide open interior means you remove a single large piece of pumpkin skin. Score the straight left edge of the "D" first, then cut the curve in one sweeping arc to keep the lobe smooth and symmetrical on the finished jack-o-lantern.
I Love South Carolina Pumpkin Stencil
South Carolina's pumpkin stencil features the "I [heart] SC" layout in rounded bubbly type, with the heart anchoring the top row and the large letters "SC" filling the lower half. The "S" in this design is notably wide and rounded, with two sweeping reverse curves that demand smooth, confident cuts. Run your carving blade in one uninterrupted arc down the full length of the "S" rather than pivoting midway, which keeps the edges even and prevents a notched-looking curve on the finished jack-o-lantern.
I Love Virginia Pumpkin Stencil
Four thick, serif-style shapes form an "I heart VA" layout on this Virginia pumpkin stencil: a tall I on the upper left, a wide heart on the upper right, and the letters V and A filling the lower half, each one fully cut through so the jack-o-lantern glows with clean, recognizable state pride. The cut-outs are generously sized with tight serif terminals; use a detail blade to navigate the inside corners of the A's crossbar without snapping the narrow bridge connecting it to the outer counter.
Inverted Eyes and One Tooth
A friendly twist on the classic face: two upside-down triangle eyes over a wide crescent smile broken by a single square tooth at the top. The eyes and mouth are simple cut-through openings, and the lone tooth is just a small tab of rind left attached along the upper lip. This is a true easy carve, so it is a great first solo project for new carvers; cut the mouth in two halves on either side of the tooth so you never stress that little tab.
Jack-o-Lantern Face Pumpkin Stencil
This cheerful pumpkin stencil depicts a pumpkin-within-a-pumpkin: a wide jack-o-lantern face with a curling stem at top, four vertical rib lines crossing the body, and a grinning mouth with curling lip ends and individual tooth segments, all cut as negative space on the outer pumpkin. The vertical rib lines are the thinnest elements, each only a slim channel of open space; carve them with a single guided stroke from stem to mouth to avoid a wavy line. A warm candle light inside makes the rib lines read as glowing stripes across the face.
Jack-o-Lantern with Glasses Pumpkin Stencil
A classic jack-o-lantern face wearing oversized rectangular glasses makes up this beginner pumpkin stencil. The eyebrow is a wide arched strip across the top, the glasses frame is a connected pair of rectangular loops each containing a circular lens opening, a triangular nose sits below, and a broad grinning mouth with one dripping fang dominates the lower half. The thick glasses frame and face outlines remain solid while the lens circles, nose triangle, and mouth are cut through. Cut the two circular lens openings inside the glasses before the wide mouth, so the frame bridge between the lenses stays firm.
Jesus Fish Pumpkin Stencil
This pumpkin stencil renders the Christian ichthys fish symbol horizontally across the pumpkin face: the fish body outline is formed by pierced dashes along the top and bottom edges, the word JESUS is cut in open block capitals inside the body, and a small cross sits at the tail junction on the right. The letters and outline dashes are all negative space, so the finished jack-o-lantern glows with JESUS framed inside the fish. Carve the outer dash segments first to establish the fish outline, then work each letter from E inward to avoid flexing the narrow skin strips between characters.
Leaf-Eyed Smile
A grinning jack-o'-lantern face where both eyes are replaced by seven-fingered cannabis leaves, paired with a small triangle nose and a wide smile broken up by blocky square teeth. The leaves, nose, and mouth are all cut through so candlelight pours out of every shape. The leaf points are narrow, so at medium difficulty use a fine saw and cut each finger from the tip inward to keep the serrated edges crisp.
Leaning Eyes and Square Teeth
The timeless jack-o'-lantern: two leaning triangle eyes, a triangle nose, and a huge crescent grin interrupted by two blocky square teeth, one up and one down. Everything is a straightforward cut-through, which is exactly why this face has been a first-timer favorite for generations. Cut the mouth last and leave the tooth tabs generous; you can always trim a tooth thinner, but you cannot put pumpkin back.
Leering Eyes and Crooked Nose
Slanted leering eyes with attached round pupils glare above a crooked off-center nose and a jagged sneer packed with pointed fangs, while scattered diamond scars glint across both cheeks. The eyes, nose, mouth, and diamonds are pierced with pupils and fang points left as shell. The hard part is the web of narrow fangs; cut each tooth gap from tip to base and never twist the blade mid-cut.
Left Wink and Six Cheek Wedges
A playful winking jack-o'-lantern: one big round open eye, one arched wink, a triangle nose, and a smiling mouth with blocky teeth, all framed by three thin whisker-like wedges slashed across each cheek. Every opening is cut through, and the six cheek wedges throw extra slivers of light. At medium difficulty, cut the large features first and finish with the skinny cheek slits, using a fine saw so each wedge tapers to a clean point.
LOL Pumpkin Stencil
Three bold serif letters spell out "LOL" in a wide horizontal layout, each character sized to fill the pumpkin face from top to bottom. The letters are fully pierced through, so the finished jack-o-lantern reads the internet acronym in glowing orange against the night. Cut the interior counters of the "O" first, since those small oval shapes can crack if you clear the surrounding area before removing them.
Lopsided Zigzag Grin
A cheerfully lopsided jack-o'-lantern face with one big round eye, one slanted triangle eye, and a wide zigzag grin stretching across the pumpkin. All three features are pierced fully through so candlelight pours out, while the surrounding skin stays untouched. The zigzag mouth is the trickiest part at this medium level, so cut each tooth point in two short strokes that meet at the tip instead of dragging one long sawing pass.
MAGA Pumpkin Stencil
The acronym "MAGA" is set in wide, bold stencil letters on the upper portion, with a row of five evenly spaced five-pointed stars running beneath it. All letters and stars are fully pierced through, so the finished jack-o-lantern glows the text and stars against the night. The star points are the sharpest cuts in this design; carve each star from its center outward to each tip rather than tracing the outer perimeter, which helps keep the thin points from tearing.
Make America Great Again Pumpkin Stencil
Four lines of bold stencil-style block text spell out MAKE AMERICA GREAT AGAIN across this jack-o-lantern stencil, with a five-pointed star flanking the top line and another pair of stars at the bottom. Every letter and star is carved as a separate pierced shape, so the orange pumpkin wall forms bridges inside closed letterforms like A, G, and R. Before cutting, secure those interior letter islands with a small pin through the pumpkin flesh so they don't drop out mid-carve and leave shapeless holes.
Mean Skull Pumpkin Stencil
Two large angled triangular eyes slash across the upper face of this jack-o-lantern stencil, pointing sharply inward to give the skull an aggressive, furrowed scowl. Below, two narrow rectangular fang-tips drop from the center, and a wide jagged mouth with three upward-pointing teeth stretches across the bottom. All six shapes are cut through individually, leaving solid orange between them to hold the face together. The small central fang-tips are easy to snap, so cut each one from the outer corner inward and avoid side pressure on the blade.
Menacing Glowing Eyes
Just two fierce, slanted eyes with curled inner corners, glaring out of an otherwise untouched pumpkin. Both eye shapes are cut fully through, and because there is no nose or mouth, the minimalist glare does all the spooky work after dark. This is a true beginner project: trace carefully, cut each eye in two passes following the hooked curve, and the whole carve is done in under twenty minutes.
Mini Face with Twin Teeth
Sized for small pumpkins, this friendly face uses two triangle eyes, a tiny triangle nose, and a rectangular mouth with two square teeth notched into the top edge. All openings cut straight through, and the compact layout keeps every feature close together so it reads clearly on a little gourd. On thin-walled mini pumpkins, use a fine serrated blade and light pressure to avoid splitting the shell between cuts.
Missouri Pumpkin Stencil
Missouri's broad, roughly rectangular shape fills this pumpkin stencil with a satisfying silhouette. The northern edge is nearly flat, the eastern side curves gently, and the lower-right corner sports the distinctive Missouri Bootheel notch with its stepped extensions reaching down and right. Carved through as a single open shape, the state glows cleanly on a lit jack-o-lantern. Carve the squared main body first, then finish the small Bootheel extensions carefully to avoid snapping those narrow protrusions.
Montana Pumpkin Stencil
Montana's wide, nearly rectangular silhouette makes this an approachable pumpkin stencil for beginners. The top and right edges are almost straight, while the left side carries the state's characteristic jagged, glacier-cut western border that dips in irregular steps down toward the southwestern corner. A small panhandle-like indent near the bottom center adds the final identifying detail. Carving the whole shape as a single open cut lets the jack-o-lantern glow brightly; trace the western zigzag border slowly with a detail blade to keep those steps sharp.
Motorcycle Pumpkin Stencil
A side-profile motorcycle fills this hard pumpkin stencil with mechanical detail: the front fork and handlebars, a sculpted fuel tank, streamlined seat fairing, and two large concentric-ring wheels. The design uses a mix of solid pumpkin bridges and open cut areas so the bike reads as a crisp silhouette when the jack-o-lantern is lit. The thin fork tubes and the thin strip separating the seat from the rear fairing are the most fragile elements. Carve the two large wheel ring sections first to establish the bottom of the composition before working inward through the frame details.
Mouse Skull Pumpkin Stencil
Two large round ear-shaped circles top a grinning skull face in this hard skull pumpkin stencil, the whole design dripping with melting-wax details that hang from the ears and chin. The skull's hollow round eyes and triangular nose are cut through, while the jagged smiling mouth and drip channels below the face create a pattern of narrow glowing slits. Lit inside a jack-o-lantern, the ears glow as two bright round openings above a menacing skull expression. Carve the two large ear circles first since they are structurally independent, then work down through the drips before tackling the fine interior face cuts.
Narrow Eyes and Barbed Smile
A sinister jack-o'-lantern face with hooked, narrowed eyes, a small heart-shaped nose, and an enormous crescent smile lined with dozens of needle-thin barbed teeth. The eyes, nose, and grin are cut through, and the tiny spikes along the smile are what push this into hard territory. Carve the long crescent first, then nick each barb outward from the opening with a fine blade so the delicate points do not tear.
Nevada Pumpkin Stencil
Nevada's distinctive silhouette gives this beginner pumpkin stencil its character: a wide flat top, a long diagonal slash running from the upper-right corner down to the lower-left, and a small rectangular notch cut into the southern tip where the Colorado River forms the state line. The whole shape is carved as one open cutout so the jack-o-lantern's candle light illuminates the full state outline. The diagonal left edge is the identifying feature; carve it as a single long confident stroke rather than short segments so the line stays true.
New Jersey Pumpkin Stencil
New Jersey's compact, boot-shaped silhouette fills this beginner state pumpkin stencil. The northern top edge is nearly square, then the shape narrows at the waist before widening again into the rounded southern shore, and the eastern coast carries a subtle wavy line tracing the Atlantic. Carved as a single open piece, the state shape glows as one connected window in the jack-o-lantern. The narrow waist in the middle is the weakest structural point during carving: cut the upper and lower sections first and leave the waist area for last.
New Mexico Pumpkin Stencil
New Mexico's silhouette is a nearly perfect square with one small rectangular notch cut into the upper-left corner where the Colorado border steps slightly northward. This beginner-friendly pumpkin stencil carves as a single large open shape, glowing as a bold square of light on the finished jack-o-lantern. The one detail that differentiates it from a plain square is that upper-left step: score the corner notch cleanly before removing the bulk of the shape so the step stays sharp rather than rounding off.
North Dakota Pumpkin Stencil
North Dakota's silhouette appears as a wide, nearly rectangular shape with a gentle wave along its northern border and a stepped notch at the lower right, making it one of the simpler state outlines to carve as a pumpkin stencil. The entire interior is cut away as a single open shape, so the lit jack-o-lantern shows the unmistakable broad flatness of the Peace Garden State glowing from inside. Score along the straight southern edge first with a ruler-guided blade to keep the base line crisp before cutting the wavy northern border freehand.
Notched Brows and Jagged Grin
A characterful jack-o'-lantern with heavy notched brows sitting over sly almond eyes, and a huge open mouth whose top edge is a row of jagged zigzag teeth above a broad curling lower lip. Eyes, brow slits, and the mouth are all pierced through for a bright, expressive glow. At medium difficulty, the key move is cutting each zigzag tooth point cleanly; slice into every corner from both directions instead of turning the blade.