Pumpkin carving templates
1159 free printable stencils. Download, print, trace, carve.
111 results · Page 1 of 4
Alabama State Shape
Alabama's tall, boxy outline gets cut clean through the pumpkin so the whole state shines as one bright window, from the straight northern border down to the little Mobile Bay tail at the southwest corner. Most of the perimeter is long straight runs, but that skinny coastal notch is what earns the medium rating; cut the tail last with a fine saw and support it with your free hand so the narrow strip does not tear.
Alaska Mainland and Islands
Alaska's mainland glows as one big cut-through shape, trailed by a sweeping chain of tiny island openings that curl away like the Aleutians and a separate panhandle cluster on the right. The main body carves like any bold silhouette, but the dozens of small island dots push this into expert territory. Drill-start every island with a skewer or small bit and cut them before the large shape so the wall stays rigid.
Alaska Pumpkin Stencil
Alaska's unmistakable outline fills the stencil: the large mainland block with its jagged southeastern panhandle, the scattered Aleutian Island dots strung to the lower left, and the intricately serrated coastline that makes this the most complex state silhouette in the collection. Each island dot and every inlet notch is a separate piece to pierce, giving the lit pumpkin a constellation-like scatter of small glowing holes alongside the main glowing landmass. Cut the main body first, then use a thin detail blade to punch the individual island dots from largest to smallest.
American Flag Heart Pumpkin Stencil
A heart-shaped American flag fills this hard-level pumpkin stencil, with the left half showing rows of five-pointed stars arranged in a grid and the right half showing horizontal stripe bars tapering as the heart curves toward the bottom point. Every star and every stripe bar is cut away as an open shape so the lit jack-o-lantern shows the heart glowing in a dense pattern of small lights. Cut each individual star point carefully before opening the stripe sections to the right, since the star grid is the most intricate area and needs surrounding skin intact for support.
Arizona State Shape
The unmistakable outline of Arizona is cut clean through the pumpkin wall, with its straight eastern border and the stair-stepped notch along the Colorado River edge on the west. The entire state interior is removed, so it reads as one big glowing block of light. For this easy cutout, trace the jagged western edge in short segments rather than one long cut to keep each little step crisp.
Arkansas State Shape
This design carves the full outline of Arkansas straight through the pumpkin wall, leaving one big glowing state shape complete with the jagged eastern border traced by the Mississippi River and the small notch at the northeast corner. The overall form is simple, but those wiggly river edges bump it to a medium carve; work the eastern side in small sawing bites and do not worry about perfection, since the irregular edge is the whole point.
California State Shape
The unmistakable outline of California cut fully through the pumpkin wall, glowing as one tall golden silhouette. The entire state shape is removed while the surrounding rind stays intact to frame it. The long straight eastern border and the jagged coastline meet at narrow angles, so take the coast in short, connected strokes rather than one continuous pull to avoid cracking the point at the southern tip.
Colorado State Shape
Colorado keeps things wonderfully simple: the state is one clean glowing rectangle cut straight through the pumpkin wall. With just four long cuts you get a bright window of light that any Coloradan will recognize on sight. Score the corners first with the tip of your saw so each straight side meets crisply, and the whole carve comes together in minutes.
Connecticut Heart Lettering
A hometown-pride message stacked in two rows: a bold letter I beside a big heart on top, with chunky C and T letters below spelling out love for Connecticut. Every letter and the heart are cut through in a thick serif style that glows brightly. This easy lettering carve stays crisp if you cut the interior corners of each serif with the knife tip first, then connect them with straight strokes.
Connecticut Pumpkin Stencil
Connecticut's compact, slightly irregular state outline fills this easy pumpkin stencil: a roughly rectangular silhouette with a gentle concave nick at the lower-right corner and subtly wavy edges that trace the actual border contours. The entire shape cuts out as a single piece, glowing in isolation against the uncut orange pumpkin skin. Because the outline has no interior detail, the challenge is keeping the thin shell border even, so use a small detail saw and rotate the pumpkin rather than repositioning your hand at the tight lower-right corner.
Connecticut State Shape
Connecticut glows as a single bold cutout, its mostly straight northern and western borders framing the wavy Long Island Sound coastline along the bottom, with the little southwestern panhandle jutting toward the corner. The whole state shape is removed so light fills the silhouette edge to edge. An easy carve overall; start with the straight border lines, then follow the gentle coastal bumps freehand without worrying about perfection.
Delaware Pumpkin Stencil
The outline of Delaware is cut through as a single solid-edged silhouette in this state pumpkin stencil, its distinctive narrow rectangular body with the curved northeastern arc at the top rendered cleanly in one piece. When lit, the entire state shape glows as an open window of light. Because this is a single large cut-out with no interior detail, position the shape toward the center of the pumpkin face and use a sharp saw blade to follow the curved northeastern border without tearing.
Delaware State Shape
Delaware's tall, slender silhouette runs nearly the full height of the pumpkin, from its narrow northern arc down to the curved coastal bulge along Delaware Bay. The entire state shape is a single cut-through opening that lights up as one bright column. Because the shape is tall and thin, cut the long straight western border last so the panel stays supported while you saw out the curvier eastern coastline.
Florida Heart Lettering
A bold I sits beside a big full heart, with the letters F and L stacked underneath, spelling out Florida love in thick serif type. The heart and all three letters are cut completely through for a bright, readable message after dark. This easy carve suits first-time letter cutters; keep the serifs slightly chunky rather than trimming them thin, and cut the heart's inner notch before removing the rest of the shape.
Florida Pumpkin Stencil
The outline of the state of Florida is cut as a single solid silhouette on this states pumpkin stencil: the long panhandle extends left, and the distinctive peninsula curves south and ends in a ragged coastline. The entire shape is one continuous void with no internal bridges, making it a fully open lantern window. The tricky part is the complex Atlantic coastline on the right side, where small inlets create many convex curves in quick succession: slow down on those curves and let the blade pivot rather than forcing a turn.
Florida State Shape
The unmistakable outline of Florida, panhandle and peninsula together, cut clear through the pumpkin wall as one bold silhouette. Everything inside the state shape is removed so the whole map blazes with candlelight against the untouched shell. Take the coastline in short relief cuts and free the panhandle last; that long thin arm is the only fragile part of an otherwise forgiving carve.
Georgia State Shape
The full outline of Georgia is removed as one big opening, from the straight western border to the jagged Atlantic coastline in the southeast. Everything inside the state shape gets cut away while the pumpkin wall around it stays intact, giving you a bright glowing map. Trace the bumpy river border on the west side carefully; the rest is long smooth strokes suited to a medium skill level.
God Bless America Pumpkin Stencil
Bold block lettering spelling "GOD BLESS" arches above a full American flag, with the canton's grid of 50 open stars and seven horizontal stripes cut through below, and "AMERICA" in wide stencil letters across the bottom of this pumpkin stencil. The stars are the most demanding element: each is pierced individually while thin pumpkin skin forms the canton background. Cut the stripe sections and base text first, then work through the star field from the center outward to keep the canton wall stable.
God Bless the USA Pumpkin Stencil
Bold block lettering spells out "GOD BLESS THE U.S.A." across two lines, with small five-pointed stars separating the letters in the lower line. The upper row uses chunky serif-style caps and the lower row uses even larger, slightly decorative capitals. Every letter interior is pierced through so the full phrase blazes when the pumpkin is lit. Keep the thin straps of orange between adjacent tall letters intact as you carve, since they carry the structural load of the entire upper row.
Hawaii Heart Lettering
Block letters spell out I, heart, H, I in two stacked rows, with a solid heart standing in for the word love. Every letter and the heart are individual cut-through shapes, so your aloha pride glows in tidy typography. Serif letters like the I and H have delicate inside corners; cut into each corner from both directions rather than twisting the blade to turn.
Hawaii Island Chain
The Hawaiian island chain sweeps diagonally across the pumpkin, with eight separate glowing cutouts running from Niihau and Kauai down to the Big Island. Each island is its own small pierced opening, so the surrounding shell needs no bridges at all. Carve the largest island first to get a feel for the wall thickness, then use a fine detail saw for the smaller islands so their shapes stay distinct.
I Love Arizona Pumpkin Stencil
This Arizona pumpkin stencil follows the same bold "I Love" grid layout: block letter I, large solid heart, and the state abbreviation AZ in chunky rounded letters. The Z's diagonal stroke makes it distinctive among state stencils, and the lack of interior counters means all four shapes cut cleanly as open silhouettes with no floating islands to worry about. Keep the gap between the bottom of the heart and the top of the A narrow enough to leave an unbroken pumpkin bridge between the two rows of letters.
I Love Colorado Pumpkin Stencil
Colorado's state-pride stencil follows the familiar "I Love" grid with a block I, a large heart, and the abbreviation CO. The O presents the key carving challenge: it requires an interior oval counter to remain as a solid island inside the letter, or the O collapses to a plain hole. On the carved pumpkin the O's counter glows as a bright orange oval surrounded by a dark ring, giving the letter its shape. Cut the outer O first, then switch to a fine blade to cut the inner oval, leaving that center disk attached to nothing, it will hold in place by friction until gently pushed out.
I Love Connecticut Pumpkin Stencil
Connecticut's "I Love CT" stencil is built from a block I, a solid heart, and the letters CT in bold rounded type. The C is a simple open arc with no counter, and the T has a wide crossbar and a straight stem, both cut as one continuous open silhouette. All four shapes pierce cleanly with no floating islands, making this one of the simpler state stencils in the series. Keep the horizontal bridge between the top row and the bottom CT row at least a half-inch thick to support the finished carving.
I Love Idaho Pumpkin Stencil
Idaho's "I Love ID" stencil follows the familiar two-row grid with a block I and heart on top, and the letters I and D below. The lower I is a simple open rectangle, while the D is a large rounded-rectangle counter that needs its curved interior removed as one piece. Because the D's inner oval is large, make a relief cut at the top before removing to avoid the pumpkin wall flexing and cracking as the piece comes free.
I Love Indiana Pumpkin Stencil
Indiana's "I Love IN" stencil uses the standard two-row grid with block I and heart above, and the letters I and N below in chunky rounded type. The N's two diagonal strokes create a triangular interior space that is left solid rather than cut, so the letter reads as a heavy outline with a solid fill. The carved pumpkin shows the N as a bright outline shape with orange glow around its perimeter and a solid center. Cut the N's two vertical legs first, then the diagonal interior, keeping each stroke short and deliberate to follow the letter's angle accurately.
I Love Iowa Pumpkin Stencil
Iowa's "I Love IA" stencil arranges the block I and heart on the top row, with the letters I and A below in the same rounded slab typeface. The A carries the familiar triangular interior counter that keeps the letter recognizable; the I beside it is a plain open rectangle. Because the A counter sits close to the lower edge of the letter, cut the outer A shape fully before addressing the counter, so the surrounding wall is already stable when you remove the small triangle.
I Love Kentucky Pumpkin Stencil
Kentucky's "I Love KY" stencil uses the two-row grid with block I and heart above, and the letters K and Y below in rounded block type. The Y's upper two diagonal arms and straight lower stem form a clean open silhouette with no counters, while the K mirrors the structure described for the Kansas stencil. When lit, both bottom letters glow as bright filled shapes. For the Y, make the two upper arm cuts first, meeting at the center junction, then cut straight down the stem to complete the shape cleanly.
I Love Maine Pumpkin Stencil
This Maine pumpkin stencil carves the bold "I [heart] ME" layout made famous by state-pride apparel: a tall serif "I" and a large smooth heart sit above the wide two-letter abbreviation "ME" in chunky rounded type. All four shapes are fully pierced through, so the jack-o-lantern glows with bright, clean cutouts against the orange wall. Because the heart is the largest single opening, carve it last to preserve structural support while you work through the tighter letter forms first.
I Love Michigan Pumpkin Stencil
A Michigan pride pumpkin stencil featuring the two-row "I [heart] MI" layout: a slim upright "I", a large rounded heart, and the state abbreviation "MI" in wide rounded caps. All three elements are cut completely through, producing bold backlit glyphs on a carved jack-o-lantern. The letter "I" in "MI" is a narrow vertical bar, so take short, controlled strokes with your carving tool to keep both long edges clean and parallel.
I Love Nebraska Pumpkin Stencil
Nebraska's pride pumpkin stencil lays out "I [heart] NE" in two tidy rows, with the heart anchoring the center and bold rounded letters "NE" filling the lower half. All shapes are complete pierce-through cutouts that glow evenly when lit. The "E" features three horizontal bars extending from a vertical spine, and those thin bars are the narrowest cuts in this design, so work from the outer tips inward on each bar to keep them from cracking before you complete the vertical spine.
I Love New Hampshire Pumpkin Stencil
Rated advanced, this New Hampshire pumpkin stencil presents "I [heart] NH" in two rows with oversized block letters. The "N" and "H" are rendered in wide rounded caps: the "N" has a diagonal stroke creating a narrow wedge, while the "H" has a horizontal crossbar suspended between two uprights, leaving two open windows on either side. Tackle the "H" crossbar with plunge cuts at each end before sawing across to prevent the bridge from snapping under blade pressure.
I Love North Dakota Pumpkin Stencil
North Dakota's pumpkin stencil delivers the "I [heart] ND" message in bold rounded type across two rows, the heart flanked by a slender "I" above and the letters "ND" below. The "D" is an upright with a large curved lobe on the right, and its wide open interior means you remove a single large piece of pumpkin skin. Score the straight left edge of the "D" first, then cut the curve in one sweeping arc to keep the lobe smooth and symmetrical on the finished jack-o-lantern.
I Love Oregon Pumpkin Stencil
Oregon's pumpkin stencil presents "I [heart] OR" in two rows with bold open letters. The "O" in "OR" is again a ring shape with an inner counter, while the "R" has a vertical stem, a curved upper lobe, and a diagonal leg kicking out to the lower right. Cut the "O" ring early in the session, then move to the "R", carving the stem and lobe before finishing with the diagonal leg, which should be released last to keep the lobe supported until the final stroke.
I Love Rhode Island Pumpkin Stencil
Rhode Island's pumpkin stencil carves "I [heart] RI" in two open rows, with a tall "I", a wide rounded heart, and the block letters "R" and "I" below. The "R" has a curved lobe on top and a diagonal leg at the bottom right, while the second "I" is a simple vertical bar. Cut the heart and the top "I" first, then the standalone bottom "I", saving the "R" for last since the diagonal leg is the most structurally complex stroke and benefits from a firm, still pumpkin.
I Love South Dakota Pumpkin Stencil
South Dakota's pumpkin stencil presents "I [heart] SD" in two rows of rounded block type, with a large heart above and the state abbreviation "SD" below. The "S" curves in two opposing arcs while the "D" is a straight upright with a large curved lobe. Carve the "D" first since its single lobe shape is easier to control, then tackle the reverse-curve "S" from top to bottom in one continuous stroke to keep the waist of the letter smooth.