25 Cool Cute Pumpkin Printables

25 printable cool cute pumpkin printables — ready to download, trace, and light up the porch.

1. Row of Hearts and Dots
Eight little hearts march in a straight row around the middle of the pumpkin, each topped by a small drilled dot, forming a glowing band of love. Every heart and dot is cut fully through, and the design is made for a wide, flat pumpkin where the horizontal band can wrap the whole front. Mark a level guideline around the pumpkin first so the hearts stay evenly spaced and perfectly aligned when lit.
See template →
2. Fan Tail Fish with Low Notches
A plump fantail goldfish glides across the pumpkin as one big glowing silhouette, with a rounded body, sweeping double tail, and small notched fins along the belly. The entire fish is pierced through in a single connected shape, so it lights up like an aquarium at night. At medium difficulty the low fin notches are the detail work; cut the broad body and tail first, then nick out the small fin points with short careful strokes.
See template →
3. Seated Rabbit with Split Ears
A seated rabbit in profile with two tall split ears, a rounded back, and tucked front paws, cut through as a nearly single silhouette with slim gaps defining the ears and feet. The shell around the bunny stays whole so the glowing shape reads crisply from a distance. Carve the narrow gap between the ears first; it is the finest cut on an otherwise smooth outline.
See template →
4. Curled Dolphin Profile
A leaping dolphin caught mid-arc, its curved body, pointed snout, dorsal fin, and sweeping tail all glowing through one sculpted cut-through opening, with an intact rind island shaping the pectoral fin and belly. The interior island is the key feature: cut the outer outline in sections and leave the connecting bridges to the island untouched until the very end, then trim them carefully to final width.
See template →
5. Bone Below Two Paw Prints
A large dog bone glows across the lower face of the pumpkin with two paw prints stamped above it, each paw built from a rounded pad and four little toes. All pieces are cut fully through, so the bone and paws shine like a porch sign for the neighborhood's favorite dog. A gentle medium carve; punch out the sixteen small toe and pad holes first, then saw the bone in halves, meeting in the middle.
See template →
6. Large Heart and Two Paw Prints
A large heart glows at the center flanked by a full paw print on each side, every pad and toe pierced clean through the wall. It is a natural fit for pet lovers, veterinary clinics, and rescue fundraisers. Cut the eight small toe ovals first while the shell is sturdy, then the two big pads, and finish with the heart, easing around its top notch so both lobes stay symmetrical.
See template →
7. Six Hearts and Tiny Top Heart
Six hearts arranged in a ring point inward toward the center, with a tiny seventh heart crowning the top and small round dots filling the gaps between them like beads on a wreath. Every heart and dot is cut fully through, creating a lantern that throws a circle of glowing hearts across the porch. For this medium carve, poke a starter hole in each heart and cut the notch last; the dots are quick work with an apple corer or drill bit.
See template →
8. Seven Hearts in a Tall Zigzag
Seven hearts zigzag down the front in an alternating left-right column, with small round dots sprinkled between them for sparkle. Each heart and dot cuts fully through, and the vertical layout is made for tall, skinny pumpkins and gourds. A medium carve mostly for the layout; tape the stencil straight down the tallest face before transferring, and carve from the top heart downward so shavings fall clear of finished cuts.
See template →
9. Eight Hearts and Eight Dots
Eight hearts arranged in a ring, each one pointing outward like petals on a wreath, with eight small round dots glowing in the gaps between them; the center of the pumpkin stays solid. Every heart and dot is cut through, turning the whole design into a radiant circular pattern. A medium carve that rewards accuracy: trace the stencil carefully so the ring stays even, and drill the dots before sawing the hearts around them.
See template →
10. Split Tooth and Two Sparkles
A giant molar with a split between its two roots gleams at the center, flanked by a four-point sparkle on each side and two small dot accents. The tooth outline is cut through around its lobed crown and twin roots, and the sparkles and dots are pierced as well, making a bright emblem any dentist would love. At medium difficulty, the pinch between the roots is the tightest cut, so saw into that notch from both sides and go slow.
See template →
11. Sleepy Eyes and Eight Lashes
Two closed crescent eyes with four little lashes apiece rest above a small oval mouth, while round dots on each side form rosy cheeks for a sweetly sleeping face. Every crescent, lash, dot, and the mouth is pierced through, so the tiny lash cuts do the expressive work. Cut the two big crescents first, then add the short lash strokes with a fine saw, keeping each one clear of its neighbor.
See template →
12. Two Fish and Six Bubbles
Two plump fish swim toward each other with a rising trail of six bubbles between them and two wavy water slots rippling underneath. The fish bodies, bubbles, and wave lines are all cut through, turning the pumpkin into a glowing underwater scene. A relaxed medium carve for anglers and lake families; drill the bubbles in ascending size order, then saw the fish, and finish with the long shallow wave curves.
See template →
13. Heart Cheeks and Eight Dots
An irresistibly cute kawaii face: two tall oval eyes, a tiny curved smile, a heart-shaped blush on each cheek, and eight little sparkle dots scattered around the edges. Every element is a small pierced opening, and the wide spacing across a squat pumpkin gives it that classic sticker-art charm. At medium difficulty the hearts and dots demand patience; use a drill bit or apple corer for the round sparkles to keep them perfectly circular.
See template →
14. Three-Horn Dino and Tall Frill
A friendly triceratops in full profile, cut through as one connected silhouette with its tall neck frill, three horns, sturdy legs, and thick tail all glowing. The single-opening design keeps things straightforward despite the detailed outline. The horns and the gaps between the legs are the trickiest spots; drill small relief holes at each tight corner so your saw can turn without tearing the rind.
See template →
15. Oval Eyes and Crescent Cheeks
This delighted face beams with two big oval eyes, a small triangle nose, crescent-shaped cheek accents, and an open grin showing a pair of stubby teeth, all dusted with tiny freckle holes. Every shape is pierced through, with the teeth left attached to the upper lip. Cut the delicate crescent cheeks with the tip of your saw only, since their thin curves are the easiest pieces to crack.
See template →
16. Tall Dino and Three Leaves
A long-necked brachiosaurus stretches up toward three tropical leaves floating above it, its full body cut through as one flowing silhouette from tail tip to tiny head. The leaves are separate cutouts with notched edges that add extra glow around the dino's snack. Cut the leaves first for practice, then work the dinosaur from the tail forward, saving the slender neck for careful final strokes.
See template →
17. Oval Eyes and Eight Cheek Dots
Big oval eyes sit under arched brows above a round button nose and a broad smile showing four blunt square teeth, with four freckle dots sprinkled on each cheek. The eyes, brows, nose, mouth, and dots are pierced through while the tooth bridges stay connected. Poke the eight small cheek dots first, then cut the large features, leaving the tooth bars until the end so they keep support.
See template →
18. Bent Hat with Nine Sparkles
A tall witch hat with a jauntily bent tip glows from the pumpkin, its wide oval brim carved as a separate opening beneath the crown so the solid hatband reads as a dark stripe between them. Around the hat, small circles and diamonds sparkle like scattered magic. This medium design hinges on that hatband bridge; cut the crown and brim as two independent openings and never saw across the band, then finish with the little sparkle shapes using a drill and detail knife.
See template →
19. Seven-Rib Shell and Three Dots
A fan-shaped scallop shell spreads seven glowing ribs from a hinged base, crowned by three small round dots floating above like sea spray. Each rib is its own cut-through opening separated by strips of intact wall, so the shell keeps its elegant ridged look when lit. Cut the center rib first and work outward symmetrically, keeping the dividing strips at least a finger-width so the fan stays strong.
See template →
20. Star Eyes and Six Freckles
This starstruck face beams with two five-pointed stars for eyes, curved brows arching above them, a wide open grin with tiny teeth, and three round freckles dotting each cheek. All the features are pierced through the wall, and the star eyes are the showpieces. Cut each star from its center out to the points, and drill the six freckles with a small round bit for perfectly matched circles.
See template →
21. Lovestruck Heart Eyes Face
This lovestruck face beams with two big heart-shaped eyes under curved brows, a wide open smile showing three square teeth, and playful dot dimples on each cheek. All the features are cut through the wall, so the hearts glow brightest and instantly read as the classic heart-eyes expression. Cut the notch at the top of each heart carefully with short strokes, since that little dip is what makes the shape.
See template →
22. Apple Leaf and Four Holes
A plump apple with a stem and single leaf glows at the front, trailed by a diagonal line of four round holes like tumbling seeds. The apple body, leaf, and dots are all pierced through, with the stem notch left as dark shell between them. A great pick for classrooms and teacher gifts; punch the four small holes with a corer first, then saw the apple outline in slow curves.
See template →
23. Right Wink and Eight Freckles
A winking smiley with one open eye, one curved wink swoosh, a big grin holding a single square tooth, and a cluster of four freckle dots on each cheek. All shapes cut through, and the tiny freckles are what nudge this to medium difficulty. Punch the dots with a drill bit or apple corer before sawing the larger openings, since small circles are far easier while the wall is intact.
See template →
24. Tall Smile and Six Cheek Dots
A tall pumpkin design with arched happy eyes, an oval nose, three dot freckles on each cheek, and a huge open smile with four little teeth hanging from the top lip. Every shape is cut through, and the six small cheek dots add a sprinkle of glowing freckles around the grin. Punch the freckle dots with an apple corer or drill bit before opening the big mouth.
See template →
25. Moon and Six Diamond Sparkles
A large crescent moon anchors the center while six diamond sparkles and a scattering of small round dots twinkle around it, turning the whole pumpkin into a patch of night sky. Every moon, diamond, and dot is a separate pierced opening, so the pattern wraps light in all directions. Carve the crescent first, then the diamonds from largest to smallest, using a drill or apple corer for the tiny circles.
See template →