25 Family Cool Pumpkin Faces

25 printable family cool pumpkin faces — ready to download, trace, and light up the porch.

1. Five Star Band and Ten Circles
Designed for a long pumpkin lying on its side, this pattern runs a band of five bold stars across the middle with ten round holes scattered above and below like floating orbs. Every star and circle is a simple cut-through, and the sideways layout makes it a fun tabletop centerpiece instead of an upright face. At medium difficulty the stars are the focus: poke each star's five points before cutting so the angles meet sharply.
See template →
2. Six Stars and Seven Dots
Six five-pointed stars and seven round dots scatter across the pumpkin like glowing confetti, wrapping around the sides rather than clustering on one face. Every star and dot is cut fully through, turning the whole pumpkin into a lantern that throws starlight in all directions. This medium all-over pattern is extra charming on a warty or bumpy pumpkin; drill the dots first, then cut each star point to point, rotating the pumpkin so you always saw at a comfortable angle.
See template →
3. Running Dinosaur and Long Tail
A velociraptor sprints across the pumpkin in full silhouette, head low, clawed legs mid-stride, and its long tail sweeping behind for balance. The entire dinosaur cuts through as one glowing shape, with the narrow tail and slim legs providing the medium challenge. Carve the thin tail and leg sections first in short segments, then remove the large body last so the delicate extremities are never left unsupported.
See template →
4. Three Fish Above Two Waves
Three fish swim in a loose diagonal school above two rolling wave bands, with a trail of round bubbles rising toward the stem. Every element is cut through: fish bodies with notched tails, the long curved waves, and the bubble dots all become glowing openings. The waves are the longest cuts, so brace the pumpkin and saw them in smooth continuous strokes; poke the bubbles out first with a round tool while the wall is solid.
See template →
5. Curled Dolphin Profile
A leaping dolphin caught mid-arc, its curved body, pointed snout, dorsal fin, and sweeping tail all glowing through one sculpted cut-through opening, with an intact rind island shaping the pectoral fin and belly. The interior island is the key feature: cut the outer outline in sections and leave the connecting bridges to the island untouched until the very end, then trim them carefully to final width.
See template →
6. Eight Teardrops Around Circle
Eight teardrop petals radiate around a central circle cutout, like a glowing daisy or sunburst wheel. Every teardrop and the center are pierced clean through, turning the pumpkin into a lantern that throws petal-shaped light across the porch. Cut the center circle first as your anchor point, then work around the ring, alternating sides so the wall stays balanced as you go.
See template →
7. Plain Thumbs Up Relief
The classic thumbs-up hand, thumb raised high over four curled fingers, presented as a bold etched panel on the pumpkin's face. No holes are pierced; you shave the outer skin inside the hand outline so the pale flesh forms the gesture, leaving thin rind lines to separate the fingers. Keep the shaved depth even and stop at each finger line so the knuckle ridges stay dark and readable.
See template →
8. Crossed Sticks and Three Dots
Two hockey sticks cross in a bold X with their curved blades flaring outward at the bottom, a round puck resting between them, and three small dots arcing above like arena lights. The sticks, puck, and dots are all pierced through, leaving a crisp diamond of pumpkin at the center of the X. At medium difficulty that center diamond is the fragile piece, so cut the four stick channels one at a time and never lever the knife against it.
See template →
9. Star Above Two Chevrons
A six-point badge star shines above two stacked chevron stripes, with three small dots arcing over the top like a crest. Every shape is cut fully through the wall, giving the design the crisp look of a service badge or rank insignia glowing on the porch. Cut the chevrons from their outer ends toward the center points, and keep the rind strip between the two stripes intact for a clean military edge.
See template →
10. Four Sails Above Three Waves
A pirate ship rides three rolling waves, its mast carrying four billowing sail panels and a small flag snapping at the top. The sails, hull, flag, and waves are all cut through, while the mast and yard lines are strips of rind left between the openings to hold the rigging together. Those mast strips make it a medium carve: cut the four sail windows one at a time, always slicing away from the mast strip so you never lever against it.
See template →
11. Curved Ball and Two Stars
A giant tennis ball dominates the pumpkin, its two big panels pierced through and separated by the signature curved seam left as an attached band of shell, with a small star cut on either side. The sweeping seam is the make-or-break piece, so cut both panel edges toward the seam rather than across it and keep the band at least a finger wide for strength.
See template →
12. Mortar and Two Split Capsules
A classic mortar bowl with its pestle angled out of the top sits above two capsule shapes, each crossed by a diagonal dividing bar. The bowl, pestle, and pill halves are cut through, with the capsule bars left as solid rind strips. This medium design makes a fun nod to a pharmacist or nurse; carve each capsule as two small windows so the center bar stays firmly attached.
See template →
13. Eight Curved Basketball Wedges
Eight curved wedge openings radiate from the center of the pumpkin, separated by ribs of shell that mimic the seams of a basketball. The wedges are all cut through, so the pumpkin itself becomes a glowing ball when lit. Keep the seam ribs a consistent width as you saw each wedge, and remove the wedge pieces gently by pushing from inside so the long curved ribs are not stressed.
See template →
14. Six Curving Volleyball Windows
Six long curving windows sweep around a central hub, recreating the swirling panel seams of a volleyball across the pumpkin's face. The curved slots are cut through while the seam lines between them stay as bold ribs of skin, so the lit pumpkin reads as a glowing ball. On this medium carve, remove the slots one at a time and alternate sides as you go, keeping stress on the curved ribs balanced until the last piece comes out.
See template →
15. Fire Helmet Above Three Flames
A classic firefighter helmet, complete with front shield and wide brim, glows above three dancing flames in this tribute design. The helmet crown, brim, and each flame are separate cut-through openings, with skin bridges keeping the helmet's shield outline dark against the light. At medium difficulty, the flame tips are the fussy part; saw each flame from its wide base up toward the point, and cut the helmet's thin brim opening last when you can support the wall from inside.
See template →
16. Three Flames and Three Embers
Three teardrop flames of different heights rise across the pumpkin, with three small round embers floating above them like drifting sparks. Every flame and ember is cut fully through, so a candle inside makes the whole design flicker like real fire. Cut each flame from its rounded base up to the curved tip in one flowing motion, and drill-start the little ember dots so they come out perfectly round.
See template →
17. Seven Unequal Honeycomb Cells
Seven hexagonal honeycomb cells of slightly different sizes cluster together, each one a glowing six-sided window separated by thick shared walls. Every cell is cut fully through, and those chunky connecting walls are what keep the pumpkin strong, so resist the urge to slim them down. Cut each hexagon side as its own straight stroke, finishing the corners cleanly with the knife tip, and start with the center cell to anchor the layout.
See template →
18. Gecko with Thirteen Toe Tips
A gecko sprawls diagonally across the pumpkin as one bold silhouette, splayed toes gripping and its thick tail curving away. The entire lizard is a single cut-through aperture, so the whole body glows as one connected shape with those distinctive rounded toe pads catching the light. At medium difficulty, the toes are the trick: cut each tiny pad by connecting it to its leg with a short channel, and remove the big body piece last.
See template →
19. Six Curved Volleyball Openings
A volleyball rendered as six sweeping curved panels that spiral around a central point, with the rind seams left between them to form the ball's stitching. Each curved panel is cut fully through, so the whole ball blazes with light divided by dark swooping lines. The medium challenge is keeping those narrow seam strips intact; cut each panel from the center outward and support the wall as you go.
See template →
20. Nine Triangles and Six Dots
Nine triangles in alternating sizes form a tidy three-by-three grid, with six small round dots tucked into the gaps between rows. Each triangle and dot is cut straight through, producing a clean modern lantern that glows like patterned tilework. This medium design is all about alignment, so tape the template securely, transfer every corner point before cutting, and carve the triangles row by row to keep the grid looking sharp and even.
See template →
21. Six Waves Sun and Starfish
A half-sun sets over two rows of curling surf, six stylized waves in all, with a chunky starfish tucked at the end of the bottom row. Each wave curl, the sun, and the starfish are individual cut-through openings separated by healthy strips of skin. For a medium carve like this, work top row first and keep the skin bridges between waves at least finger-width so the pattern stays strong through the whole session.
See template →
22. Five Curves Around a Dark Sun
Five curved galaxy arms swirl around a solid dark core, each tapered blade cut fully through so the design spins like a glowing cosmic pinwheel, with five small round star holes drilled between the arms. The center circle stays as untouched shell, anchored by the skin between the arms. At medium difficulty, the keys are the tapered arm tips; saw from the wide end of each arm toward its point, and drill the star holes before cutting the arms nearby.
See template →
23. Almond Eyes and Wide Cat Smile
A sly cat face with two swooping almond eyes, a small triangle nose, and an enormous curling grin that stretches nearly ear to ear. The eyes, nose, and mouth are cut fully through, and the thin rind strips inside the smile create the mischievous cat-lip curves. At medium difficulty, the tapering eye points need patience; finish each point with a short pull cut toward the corner.
See template →
24. Star with Four Curved Trails
A five-pointed star streaks diagonally across the pumpkin with four curved trails tapering away behind it, like a comet caught mid-flight. The star and each sweeping trail are cut fully through, with strips of rind left between the trails to keep the motion lines distinct. On this medium carve, the tapering trail tips are the tricky spots: cut each trail from its wide end toward the point and stop just short, finishing the tip with a single small stab cut.
See template →
25. Crossed Hockey Sticks and Puck
Two hockey sticks cross in a big X with taped blades angled outward and a puck resting between them at the bottom. This shaded design is carved on a continuous wall, shaving the sticks and puck out of the skin so they glow without any pierced holes, and the blade tape lines stay as raised strips. Keep your shave depth even along both shafts so the long straight lines light uniformly from top to bottom.
See template →