50 Expert Pumpkin Faces
50 printable expert pumpkin faces — ready to download, trace, and light up the porch.
1. Spooky Tree in Moon Pumpkin Stencil
A bare-branched tree fills a full circular moon in this expert-level pumpkin stencil, its trunk and sweeping limbs carved away while dozens of tight spiral curls on every branch tip remain as solid orange bridges. The lit jack-o-lantern shows the curled branch ends glowing like tiny flames against the open black sky of the moon circle. Tackle the small spiral cuts at the outermost branch tips before removing any large background sections, so the sheet stays supported while you work the most delicate shapes.
See template →2. Witch with Staff Pumpkin Stencil
A robed witch figure stands holding a tall staff topped with a flame in this expert pumpkin stencil, her pointed hat bearing a spiral curl at the tip and wisps of energy trailing her cloak and pooling at her feet. The design reads as a solid silhouette with strategic interior cuts for the face, flame, and cloak detail, so candlelight halos the entire figure while the fine interior strips glow separately. Keep the narrow bridge connecting the flame to the staff intact until last, as it is the most likely point to snap under blade pressure.
See template →3. Stegosaurus Skeleton Pumpkin Stencil
A stegosaurus skeleton shown in full side profile fills this expert pumpkin stencil: a long skull with open jaw, four bony legs with claw toes, a ribcage made of many individual rib-bone cutouts, vertebral column, and four large dorsal plate outlines along the back. The sheer number of individual rib and bone segments, each separated by thin pumpkin bridges, makes this a complex carve. Cut the large dorsal back plates first since they are the most isolated shapes, then work through the ribcage from front to back one rib at a time to avoid destabilizing the spine bridge.
See template →4. Bearded Man Portrait Pumpkin Stencil
A bearded man shown from chest up is rendered in this expert pumpkin stencil with fine portrait linework: tousled spiked hair, narrow cut-out lines for expressive eyes with visible irises, a trimmed goatee built from small isolated patches, an open jacket collar, and a table or surface line at the bottom. The face relies on dozens of thin pumpkin bridges to hold the portrait together, creating a detailed likeness when lit. Carve the small goatee patches and eye details first, before the larger jacket and background cuts are made, to keep the face area stable throughout.
See template →5. USA Map Pumpkin Stencil
The contiguous silhouette of the contiguous United States is carved as a single open pierce-through in this expert pumpkin stencil. The intricate coastline, Great Lakes inlets, and Florida peninsula are all retained in the cut edge, requiring precise control all the way around the outline. Lit from inside, the pumpkin glows entirely through the mapped shape. Work clockwise around the perimeter without lifting your tool from the cut line, since re-entering the groove at a sharp angle like the Gulf Coast bays is the most common place where the wall cracks.
See template →6. Fluffy Kitten Pumpkin Stencil
A wide-eyed, fluffy kitten sits upright with its front paws tucked forward in this expert-level pumpkin stencil. The fur is rendered as dozens of short jagged cut-outs that texture the entire head and body, with two large round eyes and a small tongue-out mouth pierced through in the face. Lit from within, the cat's face glows clearly while the fur detail creates a speckled halo of light around it. Cut all the inner facial features before the outer fur ring, since the edge fringe is fragile and removing those last keeps the face from shifting while you work.
See template →7. Shaggy Cat Pumpkin Stencil
A sleek cat sits upright in this expert-level pumpkin stencil, its fur rendered in dozens of jagged, flowing cuts that create a shaggy, windswept silhouette from pointed ears to a curled tail tip. Narrow slivers form the whiskers and facial detail, while the body interior is laced with thin connecting bridges. When lit, the cat pumpkin carving glows with textured depth. Carve the whisker lines last and from the center outward, since they are the most likely to snap if the surrounding flesh shifts.
See template →8. Sunflower Pumpkin Stencil
A large sunflower with roughly twenty lance-shaped petals radiating from a solid circular center disk fills this expert pumpkin stencil. Each petal is an individual pierce-through slot, separated from adjacent petals by a thin curved wall of pumpkin, and the disk center is also carved out. The lit jack-o-lantern blazes like a radiant wheel of light with the petal gaps glowing and the petal walls casting narrow spokes of shadow. Begin carving at the inner petal bases nearest the center disk before working toward the tips, keeping the disk cut for last so the petal ring retains its structural support.
See template →9. Devil with Trident Pumpkin Stencil
A stocky cartoon devil crouches in a lunging pose, holding a trident horizontally across his body while lightning bolts crackle at his feet. Horns, pointed ears, and a wide-toothed grin are all rendered in open cutouts, and the overall figure is surrounded by enough white space to read crisply as a lit jack-o-lantern. The three prongs of the trident sit very close together, so cut the two narrow gaps between them with a thin detail blade before removing the larger body sections to keep the surrounding pumpkin from flexing.
See template →10. Vampire Count Pumpkin Stencil
A vampire count shown from the waist up dominates this expert pumpkin stencil: a swept-back widow's peak hairline, arched expressive brows, sharp angular cheekbones, a sneering half-open mouth, and a high-collared cape spread wide at the bottom. The face is built from many disconnected cut-out islands separated by thin pumpkin bridges, giving the lit design a dramatic stained-glass quality. Before cutting any facial details, map all the bridge lines carefully: the narrow strip between the brow and the cheek is the most fragile connector and must be preserved until the end.
See template →11. Tiger Face Pumpkin Stencil
A full-face tiger portrait stares forward from this expert-level pumpkin stencil: the broad round head is ringed by a jagged fur ruff, two triangular ears with inner cutouts peek from the top corners, and the face is built from dozens of interlocking stripe-shaped cutouts that form the eyes, nose bridge, muzzle, and whisker spots. The lit result shows a photorealistic tiger rendered entirely in positive pumpkin bridges and negative glowing gaps. Work from the center of the face outward, cutting the small eye-iris pieces first before tackling the radiating stripe cuts that hold the whole design together.
See template →12. Graveyard Scene Pumpkin Stencil
A bare, gnarled tree with reaching branches, a perched owl, two flying bats, and a cluster of cemetery cross tombstones fill a large crescent-moon frame in this expert graveyard pumpkin stencil. Nearly every element is a carved pierce-through, leaving thin orange bridges for the tree branches and tombstone edges. The lit pumpkin produces a richly detailed haunted graveyard scene. Start with the smallest elements inside the scene, such as the owl silhouette and the cross details on each tombstone, before the large moon arc is removed and the frame loses rigidity.
See template →13. Sugar Skull with Roses Pumpkin Stencil
A sugar skull face with flower-ringed eye sockets, a crown of jagged flames, a heart-shaped nose, and rectangular teeth is surrounded by six individually carved roses in this expert pumpkin stencil. Every petal cluster, leaf, and decorative element is a separate pierce-through, creating an intricate Day of the Dead tableau. The carved pumpkin glows through dozens of individual openings simultaneously. Work from the center outward: finish all skull face details before the outer roses, so you can brace the pumpkin face-side-down when carving the perimeter flower clusters.
See template →14. Zombies Pumpkin Stencil
The word "ZOMBIES" in dripping, horror-font letters anchors this stencil, with a row of grasping undead arms and hands rising above the text from a pool of slime below. All the negative space around the letters and arms is cut away, leaving the drip shapes and reaching fingers glowing against the pumpkin flesh. The thin drip strands between letters are the most fragile part of this carving, so cut each letter interior first and leave the connecting drips until the very end.
See template →15. Monster Truck Pumpkin Stencil
A side-view monster truck with massive knobby tires dominates this expert pumpkin stencil: two oversized wheels with five-spoke rims, a high-clearance suspension chassis visible between the tires, a boxy cab with window cutouts, a wide front bumper, and flame or dragon graphics on the door panel. The many narrow bridges connecting the chassis rails and the spoke details inside each wheel make this a demanding carve. Cut the interior cab windows and bumper slots first, then tackle the five spokes of each wheel one at a time, always working away from the thin axle hub at the center.
See template →16. Grim Reaper with Scythe Pumpkin Stencil
A hooded Grim Reaper leans forward gripping a large curved scythe, its skeletal face visible inside the cowl, and tattered robe edges dissolving into ragged fringe at the bottom in this expert grim reaper pumpkin stencil. The composition reads as a single dramatic figure, with the scythe blade sweeping up behind the figure and the robe tatters creating many thin separate cuts below. Carve the robe fringe tatters at the base first, since those narrow flame-like cuts are the easiest to crack once adjacent large sections of the torso are removed.
See template →17. Pirate Skull Pumpkin Stencil
A grinning pirate skull wearing a broad tricorn hat dominates this expert-level pumpkin stencil, with a second miniature skull-and-crossbones badge emblazoned on the hat brim. Dense cutwork in the teeth row, eye sockets, and hat badge creates many small isolated pieces held together by narrow bridges of pumpkin flesh. Begin with the tiny crossbone details on the hat badge while your hands are freshest, then move to the eye sockets and finally the toothed lower jaw.
See template →18. Horned Demon Skull Pumpkin Stencil
A demonic horned skull with massive curved ram-like horns and a symmetrical face composed of dozens of interlocking cut fragments makes this one of the most intricate skull pumpkin stencils available. The forehead, cheeks, and jaw are all broken into shaped segments separated by thin pumpkin bridges, and the horns are densely cross-hatched with ridged cuts. Work from the center outward, cutting the tiniest interior fragments first before opening any large jaw or eye-socket voids, to avoid collapsing the many delicate bridges that hold the design together.
See template →19. Soccer Player Pumpkin Stencil
A chibi-style bearded soccer player in a striped jersey stands with a ball tucked under one arm and his other hand on his hip in this expert sports pumpkin stencil, with a detailed face, layered hair, jersey stripes, and individual fingers all rendered in fine linework. When lit, the figure glows in silhouette with the face and jersey detail visible as pumpkin-skin relief. Start with the most detailed facial features, particularly the brow, ear, and beard cuts, before working downward through the jersey stripes and ball pentagon pattern.
See template →20. Haunted Tree Pumpkin Stencil
A gnarled, bare-branched haunted tree with an angry face hidden in its trunk dominates this expert-level pumpkin stencil, its dozens of thin branch tips and the snarling mouth and eye details forming an intricate web of cuts. When lit, the branching silhouette glows against the pumpkin's skin with dozens of narrow passages of light. Work from the outermost branch tips inward toward the trunk face so the stencil sheet holds its shape while you cut the trickiest inner details last.
See template →21. Man Portrait Pumpkin Stencil
A scowling man's portrait rendered in tight linework stares out from this expert pumpkin stencil, one hand raised in a defiant gesture with a skeleton hand overlaid on it, the figure's jacket and muscular build conveyed through angled slash cuts below the face. The design relies on many small interior cuts to build the facial features, making it a demanding carve. Tackle the densely detailed face first, cutting the brow wrinkles, nostril, and lip cuts before opening any of the larger torso voids.
See template →22. Grim Reaper Pumpkin Stencil
A hooded Grim Reaper face looms from within a tattered, wind-swept cloak in this expert pumpkin stencil, its skull face showing deep-set eye sockets, a skeletal nose cavity, and rows of exposed teeth, all surrounded by jagged cloak edges that dissolve into flame-like wisps at the bottom. Dozens of small cuts through the cloak fabric, face, and shroud edges create a complex web of glowing gaps. Tackle the most crowded area, the teeth row, first when your hands and the pumpkin are both fresh, then spiral outward to the cloak wisps.
See template →23. Flame Werewolf Pumpkin Stencil
A werewolf head in profile faces right, built entirely from flame-shaped strokes and pointed fur tufts that radiate outward from a snarling snout and bared teeth, creating a tribal-tattoo effect across the whole pumpkin face. The design has no large open areas; instead dozens of narrow flame cuts pierce through, leaving thin pumpkin bridges between each cut that glow orange and separate clearly from the negative space. Cut the smallest innermost flame tips around the snout first, then spiral outward to the largest wing-like strokes at the edges.
See template →24. Mummy Pumpkin Stencil
A mummy's head and shoulders rise from a base of wrapping strips in this expert pumpkin stencil, the face emerging through layered horizontal and diagonal bandage cut-outs that reveal a single visible eye and a grimacing mouth. The design is dense with interlocking cut shapes separated by thin strips of uncut pumpkin that simulate gauze wrapping. Work from the face outward, completing the eye and mouth details before tackling the long bandage strips so the central features stay stable throughout.
See template →25. Twisted Haunted Tree Pumpkin Stencil
A twisted, leaning haunted tree with gnarled branch-arms, a hollow face cavity with two small round eye holes, and exposed root tendrils sprawling across the ground makes up this expert tree pumpkin stencil. The writhing upper branches and root fingers are each narrow separate cuts, while the face hollow is the main open void at the center. Carve the largest root sections at the base first since they anchor the lower design, then progress upward through the arm-branches, leaving the thin finger-tip branches and the tiny eye circles for last.
See template →26. Sinister Eyes Pumpkin Stencil
A pair of intensely glaring eyes fills this expert pumpkin stencil in a wide horizontal composition, with deeply furrowed brows, sharp inner-eye detail, and swirling flame-like linework around the eye sockets all rendered as intricate pierce cuts. The result when lit is a wall of illuminated eyes and chaotic energy that stretches across the pumpkin's face. Carve the small inner-eye iris details and fine flame points before opening the large eye-cavity cutouts, since those large voids will flex the pumpkin wall and make the remaining fine work harder to control.
See template →27. Lion Head Pumpkin Stencil
A majestic lion's head fills this pumpkin stencil from edge to edge, its full flowing mane rendered in sweeping curved cuts that radiate outward like flames, with the face centered and features defined by pierced nostrils, brow lines, and an open lower jaw. Lit from inside, the solid orange pumpkin forms the mane and facial structure while the cut gaps create the dramatic shading between mane locks. Begin carving in the outermost mane tips, where cuts are shortest, and work inward toward the face so the central wall remains stable while you navigate the most intricate facial detail cuts.
See template →28. Pirate Skull with Parrot Pumpkin Stencil
A weathered pirate skull in a battered tricorn hat stares out from this expert pumpkin stencil, a parrot perched on the skull's head and tattered coat lapels framing its hollow cheeks. The skull-and-crossbones badge on the hat, individual finger bones along the bottom, and ragged coat edges create dozens of intricate cut sections. Carve the small hat badge first, then the interior face hollows, before moving outward to the flowing coat edges where the thinnest bridges live.
See template →29. Rottweiler Pumpkin Stencil
A close-up Rottweiler face looks straight ahead on this dog pumpkin stencil, with expressive round eyes, a broad nose with a spiral nostril, and a relaxed mouth with a hint of jowl. Dozens of irregular cut sections across the forehead, cheeks, and ears create the breed's tan-and-black coat markings, all bridged by thin solid pumpkin-wall lines. When lit, the face glows with warmth through every gap while the orange bridges read as fur texture. Cut all the small inner-face detail shapes first, especially the nostril spiral, before tackling any of the large outer sections that would otherwise loosen the wall.
See template →30. Corgi Pumpkin Stencil
A fluffy corgi puppy sits front-facing on this dog pumpkin stencil, its large upright ears, round eyes with pupils, small round nose, and thick fur ruff all rendered in fine irregular cut lines that break the coat into tufts of light and shadow. The design has many small to medium cut sections across the face and body connected by thin fur-texture bridges. When lit, the corgi face glows warmly with every fur gap illuminated. Cut the small facial features first: the pupil circles inside the eyes, the nose, and the mouth line, before tackling the broader chest and body sections.
See template →31. Queen Portrait Pumpkin Stencil
An elderly queen in full regalia looks forward from this pumpkin stencil, her curly hair framing a detailed face with distinct brows, eyes, and lips, topped by an ornate crown bearing a cross, leaf shapes, and decorative elements. The portrait is built from dozens of small and medium cut sections across the hair, face, and jeweled bodice, with thin orange bridges holding the likeness together. Begin with the smallest crown ornament shapes at the very top before moving to the face, since removing the large hair sections early would flex the wall and risk tearing the delicate facial bridges.
See template →32. Demon Tree Pumpkin Stencil
A demonic tree creature roars from this expert pumpkin stencil: a gnarled trunk rises from spreading roots, branching into twisted limbs with curling twig tendrils, while a menacing face with jagged saw-tooth teeth and hollow eye cavities glares from the center. Dozens of thin, curving cut sections radiate outward, separated by very narrow orange bridges. Work from the outermost twig tips inward toward the central face to avoid snapping the thin outer branches while the interior is still supported.
See template →33. Open Rose Bloom Pumpkin Stencil
A fully open rose bloom fills this pumpkin stencil edge to edge, with layered outer petals that taper to pointed tips and a tight spiral center bud defined by two curved cut lines. Most of the design is cut away, leaving the petal-edge outlines and spiral as thin orange pumpkin bridges floating in a large illuminated background. The center spiral is the most fragile element, so trace its two curved cuts first with a sharp fine blade before opening the surrounding petal fields that would otherwise leave it unsupported.
See template →34. Formula Race Car Pumpkin Stencil
A detailed open-wheel formula racing car stretches across the full width of this pumpkin stencil in a low side profile, showing the nose cone, cockpit canopy, front and rear wings, and large exposed tires. The design keeps the car body as solid orange pumpkin wall with the negative space cut away around it, so the lit jack-o-lantern presents the car as an orange silhouette in a dark field. The nose cone and rear wing tips extend to very narrow points, so cut those extremities last once the large background sections have been removed and the remaining wall is light and flexible.
See template →35. Demon Face Pumpkin Stencil
A demon face stares out from this expert pumpkin stencil, its two curved ram-like horns sweeping upward and outward, wild hair radiating from the sides, a bearded chin, and glaring deeply set eyes framed by heavy brow lines. Wing-like shoulder shapes flare wide at either side. The dense interlocking cuts form dozens of small glowing slivers around the retained face features, which remain as solid orange skin. Carve the narrow hair fringe pieces on each side first to release the outer sections, then work inward toward the eyes and beard.
See template →36. Grim Reaper Pumpkin Stencil
A shrouded Grim Reaper grips a scythe overhead in this expert-level pumpkin stencil, packed with dozens of jagged, flowing cut sections that render tattered robes, bony fingers, a skull face peering from the hood, and a second smaller skull on the chest. The design reads as a dense web of orange skin bridges surrounding numerous glowing cutouts. Tackle the smallest interior cuts around the skull face first so you have full stencil support, then work outward through the robe details toward the large robes and scythe blade.
See template →37. Graveyard Scene Pumpkin Stencil
A wide panoramic graveyard scene fills this pumpkin stencil from edge to edge: a gnarled bare tree dominates the right side with spidery branches, a crescent moon peeks above the tree line, two bats fly near the top left, a row of varied tombstones stretches across the middle ground, and a foreground of jagged dead grass and roots fills the bottom. All elements remain connected as a single cut sheet of pumpkin wall with the background space pierced away, so the entire scene glows in silhouette. Carve the bat shapes and moon sliver at the top first while the tall tree branches above them still anchor the upper wall.
See template →38. Pomeranian Pumpkin Stencil
A Pomeranian's fluffy face fills this expert pumpkin stencil, with large irregular patch and blob cutouts radiating outward from a central face zone to create the breed's characteristic lion-mane ruff. The eyes, brow ridges, nose, and cheek fur are rendered as interlocking positive and negative shapes, with bold irregular fur sections throughout. Work from the central face outward, carving the eye and nose details first, then tackling the fur patch cutouts in sections to keep maximum support until the outermost edges are reached.
See template →39. Pharaoh Death Mask Pumpkin Stencil
An Egyptian pharaoh death mask stares straight out of this expert pumpkin stencil, showing the broad striped nemes headdress with its pleated side panels and forehead uraeus cobra, plus a detailed face with almond-shaped eyes, straight brows, a defined nose, and a zigzag collar at the neck. The face details are held in thin skin bridges while the headdress stripes and surrounding areas are pierced through. Carve the delicate uraeus cobra at the top first since it is the most isolated element and easiest to cut without torque on neighboring sections.
See template →40. Witch on Broomstick Moon Pumpkin Stencil
A witch on a broomstick flies across a full moon in this expert pumpkin stencil, her pointed hat, flowing robes, and broom bristles silhouetted against a circular background of ragged cloud cutouts. The witch figure is solid orange skin set against the large glowing moon disc, and the cloud tears around the moon's edge are pierced through. Carve the small jagged cloud tears around the moon perimeter first, then carefully outline the witch silhouette, leaving her as an uncut island of skin inside the open moon.
See template →41. Howling Werewolf Moon Pumpkin Stencil
A howling werewolf perched on a rocky cliff dominates this expert pumpkin stencil, with a large full moon carved as an open oval behind the creature. The moon's interior is a solid pumpkin island held in place by a narrow strip at the top where the wolf's body bridges it. Scraggly pine trees and scattered bat silhouettes flank the scene, their fine spiky branches adding delicate pierced detail against the candlelit opening. Carve the large moon opening first to anchor the composition, then work outward through the bats and trees, leaving the thin bridge at the wolf's neck for last.
See template →42. Medusa Pumpkin Stencil
Medusa's face stares out from this expert pumpkin stencil, her features rendered as thin-cut channels forming almond-shaped eyes, a small nose, and full lips against a solid oval face. The hair is replaced by dozens of writhing snake bodies, each carved as an interlocking mass of curved shapes with heads visible at the perimeter, open mouths and coiling bodies creating a dense web of negative space around the face. When lit, the snake-hair region glows with a complex, shifting pattern while the face remains a composed solid island. Work the snake-hair sections in quadrants, finishing each area before moving to the next, so no large unsupported skin islands shift mid-carve.
See template →43. Haunted Oak Tree Pumpkin Stencil
A bare haunted oak rises inside an oval frame in this expert-level tree pumpkin stencil, its trunk split at the base into gnarled roots, its branches spiraling upward with curling scrolled tips, and a sinister face lurking at the trunk where two narrow eye-slits and a spiky mouth hide among the roots. The large background sections within the oval are cut away so the curling branch and root shapes glow as solid orange silhouettes against a dark interior. Work from the outermost curled branch tips inward toward the trunk so the delicate spirals stay supported while you remove the surrounding background.
See template →44. Sugar Skull Sombrero Pumpkin Stencil
A calavera skull wearing a wide sombrero fills this expert pumpkin stencil: the sombrero brim is ringed with rows of small scallop-cut holes and vertical stripe slots, the crown shows banded tiers, and the skull below has large flower-shaped eye sockets, a heart-shaped nose, a grinning mouth, and curling moustache scrolls on each side. Every decorative element is cut away so candlelight floods through the scallops, stripes, and flower eyes simultaneously, creating an elaborate Day of the Dead glow. Start with the tiny scallop holes along the sombrero brim before any other cut, since those are easiest to control while the surrounding skin is still rigid.
See template →45. Great Horned Owl Face Pumpkin Stencil
A fierce great-horned owl face looms forward in this expert pumpkin stencil, with two large almond-shaped eye cavities framed by heavy curved brow ridges, a sharp pointed beak at center, ear tufts sweeping upward and outward, and dense spiky feather tips radiating outward from the face. The background within each eye cavity and around the brow is cut away in multiple sections, while the beak, brow ridges, and outer feather spikes stay solid as orange bridges. Begin with the eye cavities early to anchor symmetry, then cut the spiky outer feather tips last since they are the most likely to snap.
See template →46. Mountain Wolf Scene Pumpkin Stencil
This expert-level pumpkin stencil presents a layered wilderness panorama: jagged mountain peaks and a partially obscured moon sit above a mid-ground of ridgelines, while the foreground holds a row of spiky pine trees and a tiny howling wolf on a plateau. Dozens of separate cut-through shapes at varying scales build depth across the whole composition. Tackle the tiny wolf and the narrowest tree spires first, as those fragile points are easiest to cut cleanly before surrounding sections are removed and the pumpkin wall softens.
See template →47. T-Rex Pumpkin Stencil
A T. rex tears across this expert pumpkin stencil in a side-profile attack pose: massive jaws open wide with individual pointed teeth, a large round eye socket, muscular body sections, short forearms with clawed fingers, and powerful hind legs with three-toed feet all rendered as separate cut-through shapes. The jagged teeth line along the upper jaw is the most technically demanding element. Cut each tooth gap individually from the back of the jaw toward the snout tip, finishing the tooth row before opening the large body cavities so the wall stays rigid during the fine work.
See template →48. Werewolf Face Pumpkin Stencil
A werewolf face in full-snarl fills the entire design with shaggy fur radiating outward in dozens of pointed spikes, wild round eyes, and a wide open mouth showing exposed fangs and tongue. The fur spikes are individually cut through and radiate from the face in all directions, creating an extremely dense, lacy pattern when lit. Work from the outer fur tips inward toward the face, cutting each spike cluster before moving to the face features; this keeps the many thin bridges between spikes intact and supported for as long as possible.
See template →49. Screaming Face Pumpkin Stencil
A screaming man's face, rendered with wild tufted hair radiating outward in jagged spikes, fills this expert-level pumpkin stencil. The wide open mouth, squinting brow, and deeply shadowed cheeks are built from interlocking curved cut-through shapes separated by thin orange bridges that define the facial planes. The radiating hair spikes are particularly slender at their tips. Work the hair tips first with a narrow blade, then carve the facial features from the forehead down, saving the large mouth cavity for last so it doesn't weaken the surrounding wall prematurely.
See template →50. Witch Silhouette Pumpkin Stencil
A full-length witch figure stands in this expert pumpkin stencil, crowned by a tall pointed hat with a wide brim, her long flowing robes splitting into jagged tapered strips that trail toward the ground, bony fingers extending from her sleeves, and a curling decorative element at the hem. The design is built from many narrow vertical cut-through strips separated by very thin orange bridges, giving the finished carving an almost lace-like quality when lit. Work from the hat point downward, cutting each robe strip individually before widening cuts near the base where the shapes are broader.
See template →
That's our list of 50 expert pumpkin faces. Print your favorite and tag us when you're done.
Browse all pumpkin faces →