🎃

🎃12 designs · Updated for 2026

DIY Happy Halloween Pumpkin Cutouts

Looking for diy happy halloween pumpkin cutouts? You're in the right place. Print at 100% scale, tape it to your pumpkin, and poke through the lines with a pin.

Browse 12 designs ↓

★★★★★4.9/5from 2,400+ carvers✓ No watermark✓ Print-ready PDF

🆓

100% free

Every design is a free download. No account, no catch.

⚡

Print-ready PDF

One click to a clean PDF, pre-sized for a standard 8.5×11 sheet.

✂️

Carve tonight

Print, tape it to your pumpkin, trace the lines, and start carving.

12 diy happy halloween pumpkin cutouts

Preview the design and choose one that matches your carving experience.

Intermediate

Witch on a Left-Brushed Broom

A witch in a pointed hat rides her broom across the pumpkin, cloak trailing and broom bristles brushed out to the left as one bold glowing silhouette. The entire figure is cut through as a single connected opening, so the drama comes from the outline rather than fine interior detail. For this medium carve, start with the big body mass and work outward, cutting the hat point and individual bristle tips last so the surrounding rind supports your blade the whole way.

Free PDF

Easy

Ghost with Three Uneven Points

A single billowy ghost with two raised arms and a wavy hem ending in three uneven points, carved as one big glowing cutout. The entire ghost silhouette is pierced through, so candlelight fills the friendly specter from arms to tail. This easy one-piece design suits squat pumpkins with plenty of front surface; cut the smooth outer curves first and finish with the scalloped bottom points, which are the only fiddly bits.

Free PDF

Intermediate

Bent Hat with Nine Sparkles

A tall witch hat with a jauntily bent tip glows from the pumpkin, its wide oval brim carved as a separate opening beneath the crown so the solid hatband reads as a dark stripe between them. Around the hat, small circles and diamonds sparkle like scattered magic. This medium design hinges on that hatband bridge; cut the crown and brim as two independent openings and never saw across the band, then finish with the little sparkle shapes using a drill and detail knife.

Free PDF

Intermediate

Crescent Seven Stars Six Dots

A large crescent moon glows at the left while seven chunky five-point stars and six round dots scatter across the rest of the pumpkin like a full night sky. Every moon, star, and dot is pierced through, so the whole surface twinkles when lit. Space your cuts out as you go, alternating sides of the pumpkin, so the wall keeps its strength until the final star is freed.

Free PDF

Easy

Bent Crown and Broad Brim

A classic witch hat fills the pumpkin face, its tall crown bending over at the tip above a broad, gently curved brim. The whole hat is removed as one pierced piece, making a big bright silhouette with no interior details to fuss over. As an easy single-cut design, just keep your blade angled slightly inward as you saw so the large panel pulls free without wedging.

Free PDF

Intermediate

Rising Bat and Four Stars

A bold bat rises with scalloped wings spread wide while four small stars twinkle around it. The bat and every star are cut completely through the wall, turning the pumpkin into a glowing night-sky scene. The bat is one large connected opening, so it carves fast; poke a starter hole in the middle of the body and saw outward toward the wing scallops, finishing the little stars last.

Free PDF

Easy

Triangle Eyes and Twin Teeth

The timeless jack-o'-lantern: two bold triangle eyes, a matching triangle nose, and a wide friendly smile with two square teeth breaking the curve. Every feature is cut fully through, leaving the rest of the pumpkin smooth so the glowing shapes do the talking. Straight lines make this an ideal easy carve; score the triangles with a ruler edge first and the cuts will fall right in place.

Free PDF

Easy

Reverse BOO Block Letters

The word BOO in fat block letters fills the front of the pumpkin, carved in reverse relief: the background panel is shaved away while the letters remain raised in untouched skin. No holes are pierced, so the pumpkin stays sturdy and reads clearly by daylight or candlelight. An easy etch for a first shading project; trace the letter outlines with shallow score cuts before peeling the background to an even depth.

Free PDF

Intermediate

Uneven Eyes and Five Teeth

A mischievous jack-o'-lantern with deliberately uneven eyes under slanted brows, a triangle nose, and a huge crooked grin interrupted by five hanging teeth. All the features are pierced clean through so candlelight pours out of every gap. The teeth are the trickiest part at this medium level, so cut around each one slowly and leave those tabs attached to the rim of the mouth.

Free PDF

Hard

Spooky Text Pumpkin Stencil

The word "Spooky" is carved in bold bubbly lettering with each letter outlined as a cut-through shape on this Halloween pumpkin stencil. The two O's feature skull-like eye holes inside them, and drip lines hang from the letters below. Curling ribbon flourishes arc above and below the text, all pierced through. Lit from inside, the letters glow with dark gaps forming the decorative interior details. Take care to preserve the thin drip connections between letters, as those links keep each letter floating in place on the pumpkin wall.

Free PDF

Expert

Happy Halloween Drip Text Pumpkin Stencil

The words HAPPY HALLOWEEN wrap across this pumpkin stencil in a wide dripping horror typeface, the tall letters of HALLOWEEN spanning the full width of the pumpkin in a single solid banner with icicle-like drips hanging from each base. The smaller word HAPPY sits above in a lighter display face. All letters are carved as open cut-outs connected edge to edge, forming a wide horizontal band of glowing text. Thin the pumpkin wall to about half an inch across the whole text zone before carving, because the long horizontal band removes a large section of structural support and a thinner wall is easier to keep from cracking under the blade.

Free PDF

Hard

Happy Halloween Text Pumpkin Stencil

The words HAPPY HALLOWEEN appear in two stacked lines of wide block capital letters in this pumpkin stencil, the typeface clean and bold with squared serifs and open counters inside letters like A, P, O, and E. Every letter is a cut-through opening, so the lit jack-o-lantern displays a glowing two-line greeting. Before carving, identify the enclosed counter islands inside closed letters such as the inner triangles of A and the inner ovals of O and P, and cut those small interior pieces out first so each island stays anchored until its surrounding letter walls are removed.

Free PDF

Frequently asked

What size pumpkin works best for diy happy halloween pumpkin cutouts?+

A medium-sized round pumpkin (about 8–10 inches tall) works for most pumpkin cutouts. Larger pumpkins make detailed cuts easier.

How do I transfer the pumpkin cutout to my pumpkin?+

Print the PDF at 100% scale, tape it to your pumpkin, and poke through the lines with a pin or pencil. Then connect the dots with your knife.

How long do these pumpkin cutouts take?+

Easy designs take 20–40 minutes. Hard and expert designs can take 2+ hours, but the result is worth it.

DIY Happy Halloween Pumpkin Cutouts

100% free

Print-ready PDF

Carve tonight

12 diy happy halloween pumpkin cutouts

Witch on a Left-Brushed Broom

Ghost with Three Uneven Points

Bent Hat with Nine Sparkles

Crescent Seven Stars Six Dots

Bent Crown and Broad Brim

Rising Bat and Four Stars

Triangle Eyes and Twin Teeth

Reverse BOO Block Letters

Uneven Eyes and Five Teeth

Spooky Text Pumpkin Stencil

Happy Halloween Drip Text Pumpkin Stencil

Happy Halloween Text Pumpkin Stencil

Frequently asked

Browse related

Parent categories

Other synonyms

Other themes

Other difficulties

Pick a design, print it, and light up the porch.

Fresh pumpkins, in your inbox.