The 2026 contest winners are inGrand Prize, People's Choice and Most Creative, all crowned.
Winners →
+ Upload
@ai_concepts
Sep 13, 2026
Bandit the Painted Lemur, a painted no-carve pumpkinAI
0

Report this carving

Tell us what is wrong. Reports are private.

Bandit the Painted Lemur

Big amber eyes ringed in black stare out from this painted lemur pumpkin, framed by white cheeks, gray cap, and rounded black-tipped ears. It is a no-carve design done entirely in acrylics, so it keeps for weeks on a kitchen counter. Block in the white face shape first, let it dry, then add the black mask and nose so the layers stay crisp. A fun pick for zoo lovers who want something besides the usual black cat.

No ratings yet · Sign in to rate
IntermediateAnimalsCuteNo-Carve
lemurring-tailed-lemurprimatezoo-animalwildlifeanimalpaintedno-carvecuteface

Save this design for carving night, then share a photo of your own jack-o'-lantern once it's glowing.

Comments (0)

  • No comments yet. Be the first.

Our tips for carving a similar design

The trick here is clean layering: block the white face shape first and let it fully dry before adding the darker gray cap, black mask, and nose so nothing smears. Because it is a no-carve design done entirely in acrylics, the pumpkin stays whole and lasts for weeks. Work from light colors to dark, then finish with the glowing amber eyes on top.

From pumpkin to porch

  1. Clean and sketch the face

    Wipe the pumpkin with a damp cloth and dry it well so paint grips. Pick the smoothest, flattest section facing out and lightly sketch the lemur face with a pencil or washable marker. Map out the rounded white face, the gray cap, the two ears, and the placement of the eyes and nose. Keep the whole face fairly centered and low so the big eyes sit at viewing height.

  2. Block in the white face and ears

    Fill the heart-shaped face area and the inner ears with white acrylic, using two thin coats rather than one thick one. Thin coats dry faster and resist drips on the curved surface. Let each coat dry completely before moving on. A dry base keeps the dark layers on top from bleeding into the white.

  3. Add the gray cap and ear tips

    Once the white is dry, paint the gray cap across the top of the head and the rounded black tips on the outer ears. Blend a little white into your black to mix the soft gray, and keep the edge between gray and white slightly feathered so it reads like fur. Use a smaller brush along the borders for control. Let this layer dry before the next.

  4. Paint the black mask and nose

    Add the black eye patches, the dark muzzle, and the nose last among the darks so the crisp edges sit on top of dry paint. Keep the eye rings smooth and even since they frame the amber eyes. Flick a few tiny black strokes along the face outline to suggest fur texture. Let everything dry fully.

  5. Drop in the amber eyes

    Paint two round amber eyes inside the black rings using a golden yellow, then dab a slightly deeper orange around the edge of each iris for depth. Add a small black pupil and a tiny white dot of highlight to make them pop. Center the pupils so the lemur looks straight ahead. This is the focal point, so take your time here.

  6. Seal and stage the display

    When all paint is cured, brush on a thin clear acrylic sealer to protect against smudges and moisture. Set the pumpkin on the counter out of direct sun and off any heat source so it keeps longer. If you want a soft glow at night, tuck a battery LED puck beside it rather than inside. Snap your photo in daylight to catch those amber eyes.

Written with AI to match this design

Gather your supplies

Check things off as you get ready.

Work on a stable surface, keep your free hand out of the cutting path, and have an adult handle sharp tools.

Three levels of light

  • Leave intact

    The bare orange pumpkin body around the face stays untouched and reads as the natural background.

  • Peel & shade

    For an optional glow variation you could lightly peel a thin halo of skin behind the painted face to catch side light.

  • Cut through

    If you want the eyes to shine at night, the two amber eye circles are the only spots to consider cutting through, done last with an LED behind.

Learn the carving basics

Before you start cutting

Do I need to carve anything for this lemur?

No, this is a fully painted no-carve design, so the pumpkin stays whole and lasts much longer on the counter. If you crave a little glow, the only place worth cutting is the two eyes, and you should do that last with an LED behind it. Otherwise leave it solid and enjoy the paint.

How do I keep the black mask from bleeding into the white cheeks?

Let the white base dry completely, ideally an hour or more, before you add any dark paint. Use a smaller brush and a slightly drier load of black along the borders. Working light colors first and dark last is what keeps those edges crisp.

Will a fresh pumpkin last long enough painted?

A painted fresh pumpkin kept out of sun and off heat can look good for a couple of weeks, and a sealer coat helps. For a display that lasts all season, use a smooth craft pumpkin instead. Either way, wipe it clean and dry before painting.

Your take belongs here, too.

Changed a detail? Made it simpler? Share a photo of your version and tell the community what worked.

Share your pumpkin

Want more designs like this? Browse our full library of pumpkin carving ideas, or pick a free printable stencil. Every pattern and template in our own collection is free to print at home.

More pumpkins like this

Muddy the Cheerful Hippo, a painted no-carve pumpkin
AI
Muddy the Cheerful Hippo
@ai_concepts0
Zippy the Ring-Tailed Lemur pumpkin carving
AI
Zippy the Ring-Tailed Lemur
@ai_concepts0
Stripes the Ring-Tailed Lemur pumpkin carving
AI
Stripes the Ring-Tailed Lemur
@ai_concepts0
Winston the English Bulldog, a painted no-carve pumpkin
AI
Winston the English Bulldog
@ai_concepts0
Ziggy the Cheerful Zebra, a painted no-carve pumpkin
AI
Ziggy the Cheerful Zebra
@ai_concepts0
Mango the Wide-Eyed Lemur pumpkin carving
AI
Mango the Wide-Eyed Lemur
@ai_concepts0
Rings the Ring-Tailed Lemur pumpkin carving
AI
Rings the Ring-Tailed Lemur
@ai_concepts0
Kirra the Cuddly Koala, a painted no-carve pumpkin
AI
Kirra the Cuddly Koala
@ai_concepts0
You've reached the end · 8 pumpkins
The Patch Report

Fresh pumpkins, in your inbox.

The best new carvings, ideas worth stealing, and how-tos for carving season. Short, seasonal, and gone by November.

A short email during carving season. Unsubscribe anytime. See our privacy policy.