Sep 14, 2026

Round-Headed Mummy With Outstretched Arms Pumpkin

This cute jack-o-lantern features a round-headed mummy with two large oval eyes, a tiny round nose, and horizontal bandage wraps running down the body to small stub feet with arms held close to the sides. Each wrap band is a separate cutout strip, so the light outlines the whole figure in evenly spaced glowing lines. Position the design low enough on the pumpkin that the head clears any prominent vertical ribs, which would interrupt the clean curve of the round skull.

This is an AI-generated concept image: a realistic, carvable design idea rather than a photo of a finished carve. AI concepts are always labeled and sit out the leaderboard and the contest.

No ratings yet · Sign in to rate

Medium Monsters Cute Classic Cutout

mummy monster cute cutout round-head bandage outstretched-arm cartoon

Comments (0)

No comments yet — be the first.

Want to try this?

Want to try this? Here is how you could carve a friendly round-headed mummy on your own pumpkin.

Some experience helps · Cutouts + bridges

Read our carving tips

Similar stencils

Browse cute mummy and monster stencils for a similar round-head look.

Tools for this approach

Our suggestions for trying a similar carve. Start with what you already have.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon

A little extra help

Our tips for carving a similar design

The whole trick here is the row of separate bandage strips, each a thin cutout that the light turns into an evenly spaced glowing line. Plan the figure as a stack of horizontal bands with slim skin bridges between them so the front stays strong. Keep the head low and centered on a smooth panel so the round skull reads cleanly.

Written by PumpkinCarvingIdeas.com, inspired by the image above. These are our suggestions, not instructions from the uploader. This approach to the AI concept has not been tested on a real pumpkin.

From pumpkin to porch

Pick a smooth pumpkin and plan the layout
Choose a rounder pumpkin with a wide, flat front panel and few deep vertical ribs. Hold the stencil against the face and slide it low enough that the round head sits on smooth skin, away from any prominent ribs that would break the curve. A short, stocky pumpkin keeps the little mummy looking cute rather than stretched. Mark the top and bottom of the figure with a pencil so you know your working area.
Open the lid and clean out the shell
Cut a lid from the bottom or the back rather than the top so the stem stays intact and the pumpkin sits flat. An adult should handle this cut. Scoop out the seeds and pulp, then scrape the inside of the carving wall down to about one inch thick. A thinner wall makes the many small bandage cuts much easier and gives you crisper glowing lines.
Transfer the stencil
Tape the pattern smoothly over the front, easing out wrinkles so the round head does not distort. Poke the outlines with a pushpin or transfer tool, following the two oval eyes, the little round nose, the arms held close to the sides, and every horizontal bandage band. Mark clearly which strips are cutouts and which slivers stay as bridges. Peel the paper and connect any faint dots with a pencil before you cut.
Carve the face details first
Start small with the two oval eyes and the tiny round nose, cutting straight in with a fine saw blade. These small openings are your brightest spots, so take your time keeping the ovals even. Working the delicate details first, while the shell is still full and strong, reduces the chance of cracking. Gently push each piece out toward the inside.
Cut the bandage strips with bridges between
Work from the top of the body downward, cutting one horizontal strip at a time and leaving the slim uncut band above and below each opening as a bridge. Those thin skin bridges are what hold the whole front together, so never join two strips into one big hole. Save the widest openings near the feet for last so the pumpkin stays rigid while you carve. Cut slowly and let the saw do the work rather than forcing it.
Light it and take your photo
Drop in a battery LED light or a short string of LEDs rather than a candle, since the many narrow cuts sit close together. Set it low inside so the light rakes upward and outlines every bandage band. Dim the room and shoot slightly above eye level to catch the round head and the rows of glowing stripes. If any strip looks dull, shave a little skin from its inner edge to open the glow.

Gather your supplies

Check things off as you get ready.

Work on a stable surface, keep your free hand out of the cutting path, and have an adult handle sharp tools.

Three levels of light

Leave intact
The thin bridge bands between the bandage strips, plus the outer background, stay as dark untouched skin.
Peel & shade
Optional shallow scraping along the arm edges or nose gives a soft mid glow that softens the outline.
Cut through
The oval eyes, the round nose, and each horizontal bandage strip are full cutouts for the brightest light.

Learn the carving basics

Before you start cutting

How do I keep all the bandage strips from collapsing into one big hole?

Leave a slim band of uncut skin above and below every strip to act as a bridge. These bridges carry the weight of the front and keep the shape crisp. If a bridge feels flimsy, make it a little wider rather than risk a crack.

Where should I place the head so it looks round?

Set the design low on the pumpkin so the head lands on a smooth section of the front. Avoid deep vertical ribs, which would interrupt the clean curve of the skull and make it look dented. Test the placement with the stencil before you poke any holes.

What light works best for so many thin cuts?

Use a battery LED puck or a short LED string, never a candle. The narrow strips sit close together and a flame gets too hot and uneven for this design. Place the LED low inside so the light climbs up and outlines each band evenly.