The 2026 contest winners are inGrand Prize, People's Choice and Most Creative, all crowned.
@ai_concepts
Sep 25, 2026
Steal a Brainrot Shark Arch Jack-O-Lantern pumpkin carvingAI
0

Report this carving

Tell us what is wrong. Reports are private.

Steal a Brainrot Shark Arch Jack-O-Lantern

This hard steal a brainrot pumpkin carving roots a flat shark in a clearly open arch, with the tail and snout meeting the side frame, legs and boot profiles rooted at the base, and the background plus jaw gap cut through while teeth root in the jaws. Carve the arch background before the jaw gap so the shark is surrounded by open space from the start. Shallow backed shoe and gill details pick up transmitted candlelight for a layered glow effect.

No ratings yet · Sign in to rate
HardFantasyFunnyClassic Cutout
steal-a-brainrotfantasyvideo-gamerobloxbrainrotfunnysharkarch

Save this design for carving night, then share a photo of your own jack-o'-lantern once it's glowing.

Roblox and all related characters, names, logos, and trademarks are the property of their respective owners. This is an unofficial fan carving shared by our community for inspiration only. PumpkinCarvingIdeas.com is not affiliated with, sponsored by, or endorsed by any rights holder or person depicted, and no such connection is implied.

Comments (0)

  • No comments yet. Be the first.

Our tips for carving a similar design

Here the shark stays as dark rind inside a glowing arch: tail and snout meet the side frame, the legs and boots root at the base, and the background plus jaw gap get cut away while the teeth stay rooted in the jaws. Shallow-backed shoe and gill details add a second, dimmer layer of glow.

From pumpkin to porch

  1. Prep the wall

    Hollow the pumpkin and scrape the carving face to about an inch thick. Mark the arch first so you know the boundary every other cut lives inside.

  2. Map the connections

    Transfer the design and highlight every support: tail and snout touching the side frame, legs and boot profiles rooted at the base. These joins are non-negotiable, so draw them wider than your template suggests.

  3. Open the arch background

    Cut away the background inside the arch in small sections, always leaving the marked joins alone. The shark should end up floating dark inside a bright window.

  4. Cut the jaw gap

    Open the mouth gap while leaving each tooth rooted to the jaw. Cut the gaps between teeth rather than outlining the teeth themselves; it is the same result with far less risk.

  5. Back the details

    Shave the shoe laces, gill lines, and side oval accents from the inside or peel them shallow from the front so they glow dimmer than the arch. Stop as soon as light shows through when you test.

  6. Light it layered

    Use a warm LED lantern so the arch blazes, the teeth read sharp, and the backed details sit in a middle glow. Check from a few steps back and deepen any detail that stays dark.

Written with AI to match this design

Gather your supplies

Check things off as you get ready.

Work on a stable surface, keep your free hand out of the cutting path, and have an adult handle sharp tools.

Three levels of light

  • Leave intact

    The shark body, legs, and boot profiles stay full-thickness dark rind.

  • Peel & shade

    Shoe details, gill lines, and the side oval accents are shallow backed for a dim secondary glow.

  • Cut through

    The arch background and the jaw gap between the rooted teeth are cut fully through.

Learn the carving basics

Before you start cutting

What order should I cut this in?

Arch background first, jaw gap second, backed details last. Establishing the open frame early shows you exactly what supports the shark before you weaken the jaws, and relief work is safest once no more big cuts remain.

How do I keep the teeth from snapping off?

Each tooth must stay rooted to the jaw at its base, so cut only the gaps between teeth. Keep tooth roots at least half an inch wide and never lever the saw sideways against them.

Can I use a real candle in this one?

Stick with an LED. The backed details are thin spots in the wall and concentrated candle heat dries and cracks them first. A warm-white LED gives the same color with none of the risk.

Your take belongs here, too.

Changed a detail? Made it simpler? Share a photo of your version and tell the community what worked.

Share your pumpkin

Want more designs like this? Browse our full library of pumpkin carving ideas, or pick a free printable stencil. Every pattern and template in our own collection is free to print at home.

More pumpkins like this

You've reached the end · 8 pumpkins
The Patch Report

Fresh pumpkins, in your inbox.

The best new carvings, ideas worth stealing, and how-tos for carving season. Short, seasonal, and gone by November.

A short email during carving season. Unsubscribe anytime. See our privacy policy.