Similar pumpkin stencils
View all stencils →About this stencil
The Dancing Girl pumpkin stencil is a free printable PDF template. Print it, tape the pattern on, and trace it onto your pumpkin. A small cartoon girl with a ponytail stands with arms spread wide in this pumpkin stencil, her entire silhouette carved as a single large opening surrounded by six small four-petal flower cutouts scattered around her. The figure and each flower are separate pierced-through shapes, so the finished jack-o-lantern shows a glowing girl dancing among floating blooms. Cut the six small flower shapes first so the surrounding pumpkin wall absorbs tool pressure before you open the larger central figure. It makes a fun jack-o'-lantern design for Halloween night. It is rated Advanced. Estimated time: 60-90 minutes. Actual time varies with preparation, pumpkin size and experience. Fine details and narrow supports need careful planning. Follow the cutting and shading key in this design’s PDF.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 60-90 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the small flowers first. Remove the seven small flower shapes scattered around the girl. Cut each petal lobe from the outer edge toward the notch between petals; these tiny pieces pop out easily with a fine saw.
- Carve the hands and arms. Cut around the outstretched arms next. The spread fingers are the most fragile part of the design, so saw toward each fingertip from both sides and never twist the blade.
- Detail the ponytail and hair. Cut the flowing ponytail and the small tuft on top of the head. Follow each curve slowly; the narrow white gap between the ponytail and the shoulder must stay intact.
- Shape the skirt and legs. Cut the zigzag hem of the skirt and down around both legs. Take the pointed hem notches as paired cuts that meet at each point.
- Release the body. Finish the remaining torso outline, leaving a small tab along one leg until last. Support the large plug from inside as you free it so the arms and ponytail edges do not tear.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a advanced carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and small gouge if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedFolk Art Smile Pumpkin Stencil
Big round eyes split by vertical rind bars sit over a button nose and a huge grin packed with square teeth, while clusters of petal shaped leaves fan out from each cheek. Everything is cut through, and the fourteen petals plus the tooth gaps are why this rates hard. Carve from the center of the face outward so the delicate petal clusters are handled last, when the wall is lightest.
AdvancedStained Glass Wings Pumpkin Stencil
A detailed butterfly with open wings, slender body, and curled antennae, its wing panels divided by intact rib lines into a stained-glass pattern of glowing cells. Each wing cell is shaved down to pale flesh while the ribs and outline stay as raised skin, and nothing is pierced. Shave every cell to a matching depth so the wings light evenly, checking with a candle as you work.
AdvancedMagnolia Bloom Pumpkin Stencil
A five-petal magnolia bloom with a dotted center opens across the pumpkin, framed by curling vine scrolls and shaded leaves. Everything is skin-shave work at layered depths: the petals glow brightest, the leaves and curls sit dimmer, and no part of the wall is pierced. Shave each petal from the center outward with a loop tool to build that soft gradient from bright to dark.
AdvancedHarvest Sunflower Pumpkin Stencil
A sixteen-petal sunflower blooms across the whole face of the pumpkin, complete with a dotted seed head, layered leaves, and a curving stem. This is a skin-shave design: you peel the skin inside every petal and leaf while leaving orange outlines and vein lines untouched, so no light shines through. Sharpen your tools before starting and shave the big petals in long strokes from base to tip for smooth, even texture.
AdvancedEntwined Hearts & Leafy Vines
Two interlocking hearts sit at the center of this romantic design, their looping outlines woven together and trailing off into curling vines and small leaves at each corner. The whole motif is shaved into the skin as pale relief lines, so the pumpkin wall stays intact and the pattern shows clearly by daylight or candlelight. Follow the vine curves in long continuous strokes to keep the linework flowing and even.
AdvancedRose Bloom Pumpkin Stencil
A fully open rose bloom fills this pumpkin stencil, rendered as a set of curved, teardrop-shaped petals radiating from a tight spiral center. The cut-out segments are separated by thin pumpkin-flesh bridges that hold the design together, so when lit the candle glow traces the swirling petal arrangement. Carve the smallest center pieces first to avoid cracking the surrounding petals, and keep a damp cloth nearby to prevent the thin bridges from drying out mid-session.