Similar pumpkin stencils
View all stencils →About this stencil
Download the Geometric Butterfly pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. A geometric butterfly pumpkin stencil showing a symmetrical butterfly with four wings divided into bold sections: two large upper wings each containing a full circle and a pointed outer blade shape, and two lower wings each with a scalloped half-circle cutout. A slim segmented body runs down the center axis with small antennae at the top. The large wing sections and the lower scalloped openings glow brightly when lit, while the solid center body and the wing-division lines keep the butterfly shape crisp. Cut the two round upper wing circles first, since they are isolated islands that must be scored from the surrounding wing before anything else is removed. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Advanced. Actual time varies with preparation, pumpkin size and experience. Fine details and narrow supports need careful planning. Follow the cutting and shading key in this design’s PDF.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- Transfer the stencil and immediately cut the two large circles in the upper wings, these are floating islands and need to be freed cleanly before surrounding cuts remove their support.
- Open the two pointed outer blade shapes in the upper wings next.
- Move to the lower wings and cut each scalloped half-circle opening, following the curved edge in one smooth arc.
- Cut the narrow outer triangular corners of the upper wings last among the wing sections.
- Leave the center body column and the antenna lines solid throughout; they are the structural spine of the design.
- Light with an LED centered behind the body so both wings glow evenly and the circle spots appear as bright focal dots.
Tools you'll need
For a advanced carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and small gouge if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedThe Cyclops Mask Pumpkin Stencil
A huge single eye quartered by a bold plus-shaped bar dominates this monster mask, flanked by rows of diamond cutouts down each cheek, a tiny skull-like nose, and a jagged zigzag grin along the bottom. The eye quadrants, diamonds, nose, and zigzag are all cut through, with the plus bar and diamond lattice left as connected skin. This hard design demands order: carve the four eye sections first, then diamonds from the center outward, protecting that thin cross bar throughout.
AdvancedWide-Eyed Wonder Pumpkin Stencil
A wildly ornate astonished face: two huge round eyes split by vertical bars, a tall oval mouth gaping in shock, and a halo of diamonds, dots, and curved flourishes radiating in every direction. All of it is cut through, from the barred eyes to the smallest accent dot, so the whole pumpkin erupts in patterned light. Rated hard for its piece count, work from the center outward and leave the outer diamonds and dots for the final pass.
AdvancedThe Grid Grin Pumpkin Stencil
A grinning classic face where each triangle eye is split by a vertical bar of rind, the diamond nose sits between rows of small diamond cheek cutouts, and the huge smile is divided into a grid of rectangular tooth windows. Everything is pierced through, creating a lantern that flickers from dozens of openings. Rated hard because those rind bars and grid struts are fragile; cut away from each bar and never twist the blade near them.
AdvancedStained Glass Wings Pumpkin Stencil
A detailed butterfly with open wings, slender body, and curled antennae, its wing panels divided by intact rib lines into a stained-glass pattern of glowing cells. Each wing cell is shaved down to pale flesh while the ribs and outline stay as raised skin, and nothing is pierced. Shave every cell to a matching depth so the wings light evenly, checking with a candle as you work.
AdvancedLittle Royal Pumpkin Stencil
A tiny wide-eyed face with a sweet smile sits low on the pumpkin beneath a crown of triangles and diamond sparkles arching overhead. All the shapes are pierced through, from the big round eyes down to the small candy corn style points. The hard part is spacing; transfer the pattern carefully and carve the little crown pieces with a detail saw so each point stays sharp.
AdvancedCompass Star & Moon Phases
An eight-pointed compass star anchors the center while a ring of moon phases and beaded dots circles around it, from thin crescents to a full glowing disc. The star's facets and the ring are shaved at varying depths into the skin, with only the deepest moon discs approaching full brightness, giving the design a layered lantern glow. Map your depths first: shallow for the star facets, deeper for each moon as it waxes.