Similar pumpkin stencils
View all stencils →About this stencil
Download the Police Badge pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. A five-pointed star with a horizontal banner across its center spelling out POLICE in block capital letters makes up this pumpkin stencil, styled after a classic law-enforcement badge. The interior of the star points and the letter counters are cut through, while the banner background and star outline remain as solid skin. The enclosed center of the letter O is the trickiest piece: slice around it last and press a toothpick through the back of the pumpkin wall to pin the small oval disc in place. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Advanced. Estimated time: 90-150 minutes. Actual time varies with preparation, pumpkin size and experience. Fine details and narrow supports need careful planning. Follow the cutting and shading key in this design’s PDF.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 90-150 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the POLICE letters first. Work through the letters left to right. The P and O each contain a white center held by narrow white bridges; keep every bridge intact or the centers fall out.
- Cut the two thin bars. Remove the long horizontal strips above and below the lettering. They are narrow, so cut one side, then the other, and pull each strip out flat rather than bending it.
- Cut the bottom chevron. Take out the lower star piece with the deep notch in its top edge. Cut into the notch point from both sides.
- Release the big star last. The upper star is a very large plug. Leave a small tab on one of its lower points, support the piece from behind, then finish the cut and ease it out slowly so nothing tears.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a advanced carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and small gouge if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedEagle of Liberty 250 Pumpkin Stencil
Create a glowing bald eagle for America’s 250th anniversary. This advanced shaded pumpkin stencil includes two scrape depths and a printable carving guide.
AdvancedLiberty Torch 250 Pumpkin Stencil
Carve a raised Liberty torch with stars and 250 lettering. This advanced America 250 pumpkin stencil includes a printable PDF and detailed cutting instructions.
Beginner-friendlySheriff's Star Pumpkin Stencil
A six-point sheriff-style badge star with rounded ball tips glows proudly from the pumpkin in this tribute to law enforcement. The full star is removed as one big cutout, so the badge shines as a single bold panel of light. It is an easy carve despite the fancy silhouette; saw each point from its ball tip back toward the star body, and rotate the pumpkin as you go so every cut is at a comfortable angle.
AdvancedUnited States Mainland
The entire continental United States glows as one big cut-through window, from the Pacific Northwest corner down around Florida's dangling peninsula and Texas's southern point. All the interior is removed while the national border stays crisp in the surrounding skin. This one earns its hard rating on the coastlines: take the Gulf inlets, Great Lakes bumps, and the narrow Florida peninsula in small careful cuts to keep the outline true.
AdvancedMaryland State Shape
Maryland glows inside a carved rectangular window, its straight northern border on top and the deeply notched Chesapeake Bay splitting the eastern shore from the mainland. The bay itself is left as standing pumpkin wall, so the two glowing landmasses frame it dramatically. That narrow bay peninsula is what makes this a hard carve; cut away from it on both sides, keep the strip at least a finger wide, and brace it from inside if needed.
AdvancedNew York State Shape
The Empire State glows in full detail, from the straight Pennsylvania border to the jagged Adirondack edges and the skinny finger of Long Island trailing off the bottom right. The entire state interior is one pierced opening. Long Island is the trickiest part, so cut that narrow strip last with the tip of your saw and support the surrounding shell with your free hand as you work.