Similar to This
View all stencils →About this stencil
A little ship glows on the pumpkin with two triangular sails split by a tall mast, a small pennant flying at the top, and a wide trapezoid hull below. Each sail, the flag, and the hull are separate cut-through openings, with skin bridges forming the mast and boom lines between them. This easy design suits young pirates and first-time carvers; cut the small pennant first while the wall is sturdy, then the sails, then the big hull last. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
Beginner-friendlyCrescent and Four Stars
A thick crescent moon anchors the left side of the pumpkin while four five-pointed stars drift across the remaining space. All five elements are clean cut-through openings, so the pumpkin becomes a night-sky lantern with the untouched rind acting as the dark sky between them. It is an easy carve overall; the only care point is the star tips, so cut each star point-to-center in single strokes rather than trying to steer around the whole outline at once.
Beginner-friendlyBroad Cap Mushroom
A single broad-capped mushroom with a sturdy stem glows from the center of the pumpkin in this cozy woodland design. The whole mushroom is removed as one connected cutout, cap and stem together, so there are no fragile bridges to protect. That makes it a great easy project for porch-step decorating; cut the smooth dome of the cap in one continuous pass, then square off the stem base last for a clean silhouette.
Beginner-friendlyTall Star and Three Dots
One big five-pointed star dominates the pumpkin with three small round dots arcing beneath it, like a shooting star leaving a trail. Both the star and the dots are straightforward cut-through openings, making this a perfect first stencil for young helpers with an adult on the knife. Drill or poke the three dots first as warmups, then saw the star point to point, backing out at each corner.
Beginner-friendlyFive Glowing Shapes
Five bold glowing shapes scattered across the pumpkin: two stars, a circle, a square, and a triangle, like a preschool lesson turned into a lantern. Every shape is cut fully through with generous spacing, so there are no fragile bridges and each opening throws its own pool of light. As an easy design it is ideal for carving with little kids: let them pick the shape order and poke the transfer dots while an adult handles the actual cutting.
Beginner-friendlyCrescent and Three Stars
A large crescent moon curves down one side of the pumpkin while three five-point stars of different sizes float beside it. All four shapes are cut cleanly through the wall, turning the pumpkin into a glowing night sky that is simple enough for a first-time carver. Since this easy design relies on smooth curves, trace the crescent's inner arc slowly and pop each star out point by point rather than in one piece.
IntermediateEight-Petal Dot Mandala
Eight oval petals radiate from a round center opening, with a small dot punched between each petal to complete a tidy flower mandala. Every element is a full cut-through, so the finished pattern beams like a stained-glass window after dark. Punch all the little dots with a drill bit or apple corer before sawing the petals; the spacing stays much cleaner that way.