Similar to This
View all stencils →About this stencil
One big flame fills the face of the pumpkin, its four licking tongues tapering to sharp points just like the classic fire symbol. The entire flame is a single cut-through shape, so candlelight literally becomes the fire. This is an easy carve with only one piece to remove; poke the pattern deeply at each flame tip first, then saw from the rounded base upward so the narrow points come out clean instead of ragged. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 40-60 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Trace the four flame tips. Cut region 1 around the tall central tongue, shorter left tongue and two unequal tongues on the right. Keep all three white inward notches attached to the surrounding shell.
- Follow the broad rounded base. Continue down the curved outer sides and around the broad lower bowl. Preserve the lean of the central tongue and the deeper white notch on the lower right.
- Release the single flame plug. Leave a small tab on a broad lower edge while finishing the tips. Support the plug, sever the tab and remove it without pushing against the slender white notches.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediatePlain Thumbs Up Relief
The classic thumbs-up hand, thumb raised high over four curled fingers, presented as a bold etched panel on the pumpkin's face. No holes are pierced; you shave the outer skin inside the hand outline so the pale flesh forms the gesture, leaving thin rind lines to separate the fingers. Keep the shaved depth even and stop at each finger line so the knuckle ridges stay dark and readable.
Expert / ProThumbs Up with a Burst
A giant thumbs-up hand bursting from a starburst of radiating lines, complete with a rolled sleeve cuff, four curled fingers, and a proudly raised thumb. The whole emblem is continuous-wall relief carving, sculpted in layered depths with no cut-through openings, so the hand looks almost three-dimensional. This expert design depends on smooth rounded knuckles: rough out the fist as one mass, then separate the fingers with deep V-grooves before final smoothing.
AdvancedThumbs Up with Six Rays
A big thumbs-up hand surrounded by six radiating burst lines, like a glowing seal of approval for every trick-or-treater. The hand itself is sculpted in relief with shaved shading across the knuckles and thumb, while the outline gap and ray lines are carved deeper so light halos the whole gesture. Rough in the hand shape shallow at first, then deepen the shadows between the fingers gradually to keep the knuckles reading clearly.
AdvancedTree Pose with Raised Arms
A serene figure balances in yoga tree pose, arms raised overhead and one foot tucked against the standing leg, flanked by leafy sprigs on a shaved ground line. The design is entirely skin-shave shading with no pierced holes, so the figure glows in pale relief against the dark rind. Shave the torso and legs in long continuous strokes for smooth lines, then detail the thin arms and leaves with a fine gouge.
IntermediateThree Fish Above Two Waves
Three fish swim in a loose diagonal school above two rolling wave bands, with a trail of round bubbles rising toward the stem. Every element is cut through: fish bodies with notched tails, the long curved waves, and the bubble dots all become glowing openings. The waves are the longest cuts, so brace the pumpkin and saw them in smooth continuous strokes; poke the bubbles out first with a round tool while the wall is solid.
IntermediateEight Teardrops Around Circle
Eight teardrop petals radiate around a central circle cutout, like a glowing daisy or sunburst wheel. Every teardrop and the center are pierced clean through, turning the pumpkin into a lantern that throws petal-shaped light across the porch. Cut the center circle first as your anchor point, then work around the ring, alternating sides so the wall stays balanced as you go.