Similar pumpkin stencils
View all stencils βAbout this stencil
This free Chill Capybara pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. The internet's favorite chill rodent sits in calm profile, its whole rounded body glowing warmly with a small dark eye and nostril left as untouched spots of skin. Rather than piercing the wall, you shave the capybara's full silhouette down to the inner flesh so it lights up as one soft shape. For this medium shading carve, peel the big body areas with a flat scraper, thin them evenly, and leave the eye and nose dots strictly alone. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Intermediate. Estimated time: 90-120 minutes. Actual time varies with preparation, pumpkin size and experience. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a continuous-wall shading design: you never cut all the way through the pumpkin. On the printable pattern, light gray regions get just the skin shaved off for a faint glow, dark gray regions are scraped deeper so more light comes through, and white areas keep their skin untouched. The numbers give you the safest working order. Plan on about 90-120 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the wall to about 1 inch behind the design so light can pass through the shaded areas. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer the outlines by poking dots along every line. Work with a loop tool, clay ribbon scraper, or the back of a spoon rather than a saw.
Shading order
- Trace the capybara (1). Scrape every gray region shallowly, beginning at the left flank marked 1. Follow the broad seated body, two small ears and three visible feet. Keep the white inner ear, eye, nostril, smile, haunch curve, toe notches and background intact.
- Brighten the body (2). Deepen the broad dark-gray body center marked 2 and small unnumbered head extension beside the ear. Leave the pale outline, narrow ears, lower legs and feet shallow. Preserve the retained facial marks and hind-leg crease; never pierce the wall.
Check your progress often: set a bright LED inside and dim the room lights, and the glow shows exactly where to scrape deeper. Go slowly near thin spots and stop before the wall flexes; a pierced wall cannot be undone.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
IntermediateDreamy Dozer Pumpkin Stencil
Two closed crescent eyes with four little lashes apiece rest above a small oval mouth, while round dots on each side form rosy cheeks for a sweetly sleeping face. Every crescent, lash, dot, and the mouth is pierced through, so the tiny lash cuts do the expressive work. Cut the two big crescents first, then add the short lash strokes with a fine saw, keeping each one clear of its neighbor.
IntermediateSweetheart Smile Pumpkin Stencil
An irresistibly cute kawaii face: two tall oval eyes, a tiny curved smile, a heart-shaped blush on each cheek, and eight little sparkle dots scattered around the edges. Every element is a small pierced opening, and the wide spacing across a squat pumpkin gives it that classic sticker-art charm. At medium difficulty the hearts and dots demand patience; use a drill bit or apple corer for the round sparkles to keep them perfectly circular.
IntermediateThe Happy Frenchie Pumpkin Stencil
An adorable French bulldog face with the breed's signature upright bat ears glowing at the top, round eyes, a button nose, and a tidy mustache-like muzzle with a small mouth below. The ears, eyes, nose, and muzzle are pierced openings while the skin between them shapes the flat Frenchie face. At medium difficulty the big ear panels are easy, but take care around the narrow gap between the nose and mouth so the bridge stays intact.
IntermediatePuddles the Puppy Pumpkin Stencil
A sweet puppy face fills the pumpkin: two long floppy ears drooping down the sides, small round eyes, a rounded nose, and a short curved smile beneath it. The ears, eyes, nose, and mouth are all cut through, so the whole dog glows warmly after dark. Rated medium mainly for the large ear openings; leave a generous strip of wall between each ear and the eyes so the face stays sturdy.
IntermediateSweet Whiskers Pumpkin Stencil
A sweet cat face rendered entirely in surface shading: pointed ears with inner triangles, wide eyes with crescent pupils, a small nose, a curved smile, and eight long whiskers fanning across the cheeks. Nothing is pierced through, so you shave away just the orange skin and let the pale flesh show the design. At medium difficulty, keep your scraping depth even along the thin whisker lines so they all glow with the same brightness.
AdvancedStarry-Eyed Sweetie Pumpkin Stencil
Two huge sparkling anime-style eyes, each split by a vertical skin bar, beam above a tiny smile and heart-shaped cheeks, while dozens of little stars and dots twinkle across the whole pumpkin. The eyes, hearts, stars, and dots are all cut through, leaving the eye bars intact. The sheer number of small piercings makes this a hard carve; drill all the dots first, cut the stars with a fine detail saw, and save the big barred eyes for the very end.





