Similar pumpkin stencils
View all stencils →About this stencil
This free Stork with Baby pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. A flying stork carries a bundled newborn in its beak in this cheerful pumpkin stencil, the whole scene rendered as a single horizontal silhouette cut entirely through the pumpkin wall. The stork's body, outstretched wings, long bill, and the round swaddled baby bundle are all connected in one flowing outline. Because the bird's bill is the narrowest point in the silhouette, carve it last and approach the tip from the beak base rather than from the pointed end to avoid snapping. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Beginner-friendly. Estimated time: 60-90 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 60-90 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Score the whole scene. Trace the entire silhouette first: the swept-back wing, the tail feathers, the long bill, and the bundle hanging below it. The whole design is one connected plug, so a clean scored line is your map.
- Cut the bill and the hanging tie. Cut the long thin bill and the narrow strip that connects it to the bundle while the wall is stiff. Work from the head toward the bill tip, cutting each side separately; this is the most fragile part of the pattern.
- Cut the bundle. Cut around the round swaddled bundle, including the small knot points near the tie. Support it with a finger as you close the curve so it does not sag and tear the thin tie above.
- Cut the head and wing. Cut the head, the notched crest, and the big wing sweeping back over the body. Poke the blade in fresh at the deep notch between wing and tail rather than turning inside it.
- Release the body. Finish the chest and the pointed tail feathers, leaving a small tab under the belly. Support the large plug with your palm, sever the tab, and push the whole silhouette out from inside.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlySplashy the Whale Pumpkin Stencil
A chubby, smiling whale with a curled tail sprays three playful droplets from its spout in this sweet ocean design. Nothing is pierced through; instead you shave away the orange skin inside the whale and droplets so they glow as soft golden shapes against the untouched pumpkin around them. That continuous-wall approach makes it very kid-friendly; scrape shallow, even layers with a loop tool until light shows through evenly across the whale's body.
Beginner-friendlyBaby Footprints Pumpkin Stencil
Two tiny baby footprints, complete with individual toe circles, sit inside a gracefully flowing open-line heart on this pumpkin stencil for expecting parents. The footprint soles and toes are all cut away while the elegant swirling heart perimeter stays as a solid pumpkin-skin border. Carve all ten toe circles before cutting the foot soles, since the toe holes are easiest to punch cleanly when the surrounding wall is still undisturbed.
Beginner-friendlyBaby Footprints Heart Pumpkin Stencil
Two cartoon baby footprints sit side by side inside a swirling open-line heart outline on this easy hearts pumpkin stencil. The footprints are pierced through entirely, while the thin looping heart border and the zigzag crack detail beneath are left as solid bridges of pumpkin skin. The ten small toe circles are the trickiest cuts: carve them with a small round detail bit or the tip of a narrow blade, and do them before removing the larger foot cutouts so the surrounding wall stays rigid.
AdvancedSnowy Chick Pumpkin Stencil
A plump baby penguin stands in profile facing right, with a dark head and back, a softly glowing belly, and tiny webbed feet. The design is shaded rather than pierced: you shave the belly and face patches thin so they shine brightly, leave the flipper and back skin dark, and feather the transition between them. Work the big belly area with broad shallow strokes and save the fine downy texture lines for the very end.
AdvancedPip the Seal Pumpkin Stencil
A chubby baby seal lounging with its tail flipped up, round dot eyes, a sweet whiskered snout, and stubby front flippers. The body is revealed by shaving the skin into a smooth pale panel while thin lines of untouched rind form the whiskers, mouth, and flipper creases. This hard shading pattern lives in those fine lines; peel the big body areas first, then carve the whiskers with light, shallow strokes so they stay crisp.
AdvancedComing Soon Baby Pumpkin Stencil
This pumpkin stencil spells out "COMING SOON" in chunky rounded letters across two rows, with a pair of baby footprints replacing the two O letters in the word SOON, and a small heart dotting the I above. The letters are each bold and thick, with the interiors of rounded letters like C, G, and the zero-like Os cut away while the outlines stay solid. When carved and lit, the baby-announcement message glows warmly across the pumpkin face. Cut the two enclosed letter counters in COMING first before moving to the footprint shapes, which have the most delicate toe-dot details.