Similar to This
View all stencils →About this stencil
A five-armed starfish rendered entirely in surface shading, with a dotted texture running down each tapered arm for a realistic sea-star look. Nothing is pierced through: you shave away the outer skin inside the outline while the pumpkin wall stays intact, so it reads beautifully in daylight. At medium difficulty, scrape shallow and even first, then deepen the dotted ridges last so the texture stays defined. This design is rated Intermediate and takes most carvers around 75 minutes from trace to glow. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediateFan Tail Fish with Low Notches
A plump fantail goldfish glides across the pumpkin as one big glowing silhouette, with a rounded body, sweeping double tail, and small notched fins along the belly. The entire fish is pierced through in a single connected shape, so it lights up like an aquarium at night. At medium difficulty the low fin notches are the detail work; cut the broad body and tail first, then nick out the small fin points with short careful strokes.
IntermediateSeated Rabbit with Split Ears
A seated rabbit in profile with two tall split ears, a rounded back, and tucked front paws, cut through as a nearly single silhouette with slim gaps defining the ears and feet. The shell around the bunny stays whole so the glowing shape reads crisply from a distance. Carve the narrow gap between the ears first; it is the finest cut on an otherwise smooth outline.
IntermediateCurled Dolphin Profile
A leaping dolphin caught mid-arc, its curved body, pointed snout, dorsal fin, and sweeping tail all glowing through one sculpted cut-through opening, with an intact rind island shaping the pectoral fin and belly. The interior island is the key feature: cut the outer outline in sections and leave the connecting bridges to the island untouched until the very end, then trim them carefully to final width.
Beginner-friendlyTall Toes Above a Low Paw Pad
A big glowing paw print built from four oval toe pads arranged above one broad heart-shaped main pad. All five shapes cut cleanly through the wall, and the generous spacing between pads makes the layout very forgiving. Drill a starter hole in the center of each pad and saw outward to the line; the smooth convex curves are ideal practice strokes for young or first-time carvers.
IntermediateGecko with Thirteen Toe Tips
A gecko sprawls diagonally across the pumpkin as one bold silhouette, splayed toes gripping and its thick tail curving away. The entire lizard is a single cut-through aperture, so the whole body glows as one connected shape with those distinctive rounded toe pads catching the light. At medium difficulty, the toes are the trick: cut each tiny pad by connecting it to its leg with a short channel, and remove the big body piece last.
Beginner-friendlyLong Dog with Three Short Feet
A full-body dachshund silhouette trots across the pumpkin, long low back, floppy ear, upturned tail, and short legs all captured in one clean glowing shape. The entire dog is removed as a single cut-through, so light floods the whole outline. This easy design has just one tricky zone: the narrow gaps between the legs. Cut the big body outline first, then carve carefully around each leg so the slim wall strips between them survive.