Similar to This
View all stencils →About this stencil
The classic mid-stride Bigfoot pose, arms swinging, one foot lifted, framed inside a rounded panel. This is a shading design: you shave the background panel down to the pale flesh and leave the sasquatch silhouette raised in untouched orange skin. Trace the outline with a scoring tool first, then peel away from the figure toward the panel edge so you never nick the famous profile. This design is rated Intermediate and takes most carvers around 75 minutes from trace to glow. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediateSeven-Leaflet Cannabis Leaf
A symmetrical seven-leaflet cannabis leaf spread across the pumpkin's face, each serrated blade radiating from a short central stem. The leaf glows through shaved skin rather than open holes, so every jagged tooth along the edges reads clearly while the wall stays solid. A medium shading design; score the full outline first, then peel from the center of each leaflet outward so the serrations do not tear. Best saved for the adults-only party pumpkin.
AdvancedLong-Nosed Abstract Face
An abstract face in a modern-art style: a sweeping brow arc crosses the top, a long straight nose drops down the middle, curled spiral shapes form the cheeks, and short hatch marks add texture beside one eye. Each line is a pierced channel, so the portrait glows as a set of elegant strokes. At hard difficulty the narrow curved channels are the challenge; keep them at least a finger-width and undercut the edges slightly so light spreads.
IntermediateGear Cross and Three Dots
A chunky steampunk gear glowing around a solid crossbar, with three round rivet dots floating beside it like escaping sparks. The spaces between the gear teeth and the four windows inside the cog are cut through, while the cross-shaped bar stays attached to the pumpkin wall and holds everything together. Carve the small dots first, then the gear windows, and keep the crossbar at least a finger wide so the design stays rigid.
Beginner-friendlyFlask With Three Bubbles
A chunky Erlenmeyer flask with three round bubbles rising from its neck, giving off a mad-scientist potion vibe when lit. The flask body and each floating bubble are cut cleanly through, so the brew appears to glow and fizz after dark. This easy design suits first-time carvers: cut the big flask opening from the bottom up, then punch out the three circles with a small round cut or an apple corer.
AdvancedVeined Seven-Leaflet Cannabis
A detailed seven-leaflet cannabis leaf spreads across the pumpkin, each serrated leaflet shaved into the skin with its center vein and feathered side veins left as raised lines. Nothing is pierced, so the leaf reads as pale botanical relief against the dark rind day or night. This hard etch rewards patience; score every vein with a v-gouge first, then shave the leaflet panels down to a matching depth around them.
IntermediateSmiling Oval Alien Face
A big-eyed alien stares out from a smooth oval head, framed by a bold outline band that arcs over the brow. The huge almond eyes, brow lines, nostril dots, mouth, and head outline are all pierced through, with small connecting tabs holding the face pieces to the shell. Do not cut those tabs: the little bridges are what keep the eyes and outline from collapsing inward.