Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
803 results · Page 17 of 23
Skeleton in Bowler Hat Pumpkin Stencil
A cartoon skeleton in a bowler hat tips its hat with one bony hand while its round skull grins with simple triangular nose and dot eyes on this Halloween pumpkin stencil. The ribcage, arm bones, and pelvis are each rendered as small separate cut islands surrounded by pumpkin skin. Because the design is built from many floating cutout islands, carve the larger open bone shapes in the torso before tackling the small finger and toe segments, so the pumpkin stays structurally sound while you work the finer extremities.
Skull Crown Ghost Pumpkin Stencil
A round skull face wearing a crumbling castle battlement crown tops this ghost pumpkin stencil. Large angry eyes with flame-shaped pupils, a small cracked nose bridge, and a row of jagged teeth fill the circular face, all pierced as cut-throughs while the surrounding ring frame and crown teeth remain as solid pumpkin. The lit jack-o-lantern glows through the eyes and mouth in a fierce scowl. Carve the crown battlements first before cutting the circle frame below, so the narrow wall sections holding the crown have full support while you work.
Skull Face Pumpkin Stencil
A skull face pumpkin stencil built from two large circular eye sockets, a heart-shaped nasal cavity, two angled cheekbone tabs, and two rows of individual oval teeth lining an open jaw. All the white areas cut through, so the finished jack-o-lantern reads unmistakably as a skeleton against the dark. The two rows of closely packed oval teeth are the trickiest part: cut each tooth individually rather than scooping the whole jaw at once, and leave the tiny bridges between them for last so none tip inward.
Skull Pumpkin Stencil
Two wide almond-shaped eye sockets with small fang-like lower details, a paired nasal cavity of two thin vertical slots, and a broad rectangular mouth with chunky upper and lower teeth make up this straightforward skull pumpkin stencil. The five main shapes are spread across the face with generous pumpkin skin between them, making this a stable carve. Cut the narrow nasal slots first since they are easiest to lose track of; follow with the eye sockets, and save the wide mouth for last so the pumpkin face remains solid while you finish the upper details.
Slant Brows and Triangle Eyes
Pure menace in four cuts: two big triangle eyes slanted inward in a hard glare, each topped by a thin detached brow slit angled the same way. All four shapes are cut through, and with no mouth at all the silent stare does the work. This is one of the easiest designs to carve and one of the most effective; keep the brow slits narrow and parallel to the eye tops so the angry angle stays sharp.
Slanted Cat Eyes and Whiskers
A low, wide cat face with menacing slanted eyes, a triangle nose, and long horizontal whisker slashes stretching across both cheeks. Each feature is pierced clean through, and the wide layout suits a squat, round pumpkin. Angle your saw to match the eye slant, and cut the long whiskers in two passes from the outside in so the thin slits stay crisp and even.
Slanted Eyes and Jagged Grin
A fierce horror face made of three bold shapes: two sharply slanted eyes that hook downward like angry slashes, and a wide zigzag mouth full of jagged points. Everything is cut through, so the whole face blazes with candlelight and reads clearly from the street. It is an easy carve despite the menacing look; use long straight cuts for each zigzag segment and the aggressive angles practically draw themselves.
Slanted Eyes and Twin Fangs
A wicked jack-o'-lantern with sharply slanted eyes, a small triangle nose, and a curling grin pierced by two long fangs hanging from the upper lip. All the features cut straight through, and the fangs read as solid pumpkin left inside the glowing mouth opening. It is an easy carve overall; just remember the fangs are attached only at the top, so slice along their sides gently and never lever the knife against them.
Slanted Eyes and Zigzag Grin
The timeless sinister pumpkin: two sharply slanted eyes with hooked inner corners, a small angled nose notch, and a long zigzag mouth that saws across the lower face in jagged peaks. All five openings are cut clean through for maximum glow. It is rated easy because every shape is bold and open; the one spot that needs care is the zigzag mouth, where cutting into each point from both sides keeps the teeth from rounding off.
Sleeping Moon, Stars & Cloud
A sleepy crescent moon with a gentle closed-eye face drifts above a puffy cloud, with two twinkling stars floating at its side. Most of the design is shaded by shaving the skin so the moon and cloud glow softly, while the stars can be etched to match. Keep your shave shallow on the facial features, going just deep enough on the eyelid and lips that they read as darker lines.
Sleepy Eyes and Eight Lashes
Two closed crescent eyes with four little lashes apiece rest above a small oval mouth, while round dots on each side form rosy cheeks for a sweetly sleeping face. Every crescent, lash, dot, and the mouth is pierced through, so the tiny lash cuts do the expressive work. Cut the two big crescents first, then add the short lash strokes with a fine saw, keeping each one clear of its neighbor.
Sloping Eyes and Two Teeth
Two steeply sloping eyes scowl above a crooked grin holding two chunky square teeth, one notched into the top lip and one into the bottom. The eyes and mouth are pierced through, with the blocky teeth left as shell inside the mouth opening. Cut the outline of each tooth before clearing the rest of the mouth, and the asymmetry of the design means small wobbles only add to the attitude.
Sloth Pumpkin Stencil
A sloth clings with its long clawed arm across the center of this easy pumpkin stencil, its round face showing closed or half-shut eyes and a compact round nose, with a shaggy fur outline around the head and a rounded body below. The large body and arm openings are cut through while the face detail pieces stay solid, so the lit pumpkin shows the sloth's relaxed expression clearly outlined in orange. Cut the small eye-detail pieces before opening the large arm void so those delicate shapes have full surrounding support.
Small Cat With Crescent Smile
A sweet cat face scaled for small pumpkins, with almond eyes topped by pointed ear notches, a tiny triangle nose, a crescent smile, and two slender whiskers flaring from each cheek. Everything cuts fully through, and the shapes are simple and forgiving. The whiskers are the only delicate part; cut each one as two long strokes meeting at the tip instead of dragging the saw sideways through the narrow slit.
Small Round-Eyed Surprise
The most minimalist face possible: two small round eyes and a single oval mouth, placed low on a tall pumpkin so the blank rind above becomes part of the joke. Just three quick cut-through holes and the carve is done, which makes this a genuine five-minute project. Keep the openings small and evenly spaced; on such a spare design, clean placement is what sells the look.
Small Triangle-Eyed Smile
Made with small pumpkins in mind, this cheerful face uses two modest triangle eyes and a single wide crescent smile with no teeth to fuss over. All three shapes are cut straight through, giving a warm, friendly glow from even a tabletop-sized pumpkin. It is one of the easiest carves on the site; on a small pumpkin, use a thin serrated saw and cut the smile from the center outward so the thin curve stays even.
Small-Eyed Dog and Short Smile
A sweet puppy face fills the pumpkin: two long floppy ears drooping down the sides, small round eyes, a rounded nose, and a short curved smile beneath it. The ears, eyes, nose, and mouth are all cut through, so the whole dog glows warmly after dark. Rated medium mainly for the large ear openings; leave a generous strip of wall between each ear and the eyes so the face stays sturdy.
Smiley Face Pumpkin Stencil
A classic smiley face fills this easy pumpkin stencil: a broken circle made of twelve short arc segments forms the head outline, two tall oval eyes sit in the upper face, and a wide curved smile with rounded upturn ends completes the expression, all cut through as open negative space. The twelve dash segments that form the outer circle are separated by small uncut gaps, creating a dotted-ring effect when lit. Carve the outer arc segments first to define the circle, then cut the eyes and smile; the uncut gaps between segments are intentional and should be left untouched.
Smiley Jack-o-Lantern Pumpkin Stencil
Two large rounded arch eyes, each with a small notch cut from the bottom edge, sit above a wide U-shaped grin lined with four evenly spaced rectangular teeth in this easy pumpkin stencil. The result is a cheerful, friendly face rather than a sinister one, and when lit the broad open eyes and blocky smile radiate warmth across the porch. The small notches at the base of each eye are the only detail that can break off if carved too aggressively, so score those notch curves gently with the tip of your blade before removing the eye sections.
Smiling Alien Face Pumpkin Stencil
An alien face with a wide oval cranium fills this pumpkin stencil, featuring two large bulging almond-shaped eyes with small hooked inner corners, a two-dot nose, a curved smile, and a rounded forehead band rendered as arcing cut-through lines. The eye shapes and facial features are each separate pierces, while the outer oval head outline is also cut away, framing everything in open light. The narrow forehead arc is the most fragile element, so score it fully before pushing through to avoid it snapping midway.
Smiling Emoji Pumpkin Stencil
A round smiley-face emoji with tousled hair rendered in chunky pumpkin-skin islands fills a large circular cutout on this emoji pumpkin stencil, with squinting eye arcs and a wide open-toothed grin kept as uncut bridges glowing warm orange against the lit void. The outer circle is the single largest cut, and the interior face elements are held in place by the skin bridges. Carve the interior details first, starting with the two small eye-crescent cuts, then the mouth gap, and only after those are complete open the big circular surround to avoid the face islands shifting.
Smiling Narwhal & Two Fins
A smiling narwhal glides across the pumpkin with a long spiral tusk, two side fins, and a happy upturned mouth. The whole body is skin-shave work with no pierced holes, so the pale shaved shape stands out against the dark rind by day and glows gently with a light inside. On this medium shading design, etch the thin tusk and smile lines first with a fine V-tool, then clear the wide body area so you never drag a big tool across your detail lines.
Smiling Oval Alien Face
A big-eyed alien stares out from a smooth oval head, framed by a bold outline band that arcs over the brow. The huge almond eyes, brow lines, nostril dots, mouth, and head outline are all pierced through, with small connecting tabs holding the face pieces to the shell. Do not cut those tabs: the little bridges are what keep the eyes and outline from collapsing inward.
Smiling Sea Turtle
A smiling sea turtle paddles across the pumpkin, its patterned shell divided into glowing plates while thin ribbons of skin stay in place to draw the head, flippers, and shell segments. This is a shading-style design carved on a continuous wall, so you shave away the skin rather than piercing holes, letting the whole turtle glow softly. Shave in thin layers and test with a light often until the flippers and shell panels shine evenly.
Snail Pumpkin Stencil
A giant snail is the surprising subject here: a segmented spiral shell packed with dashed arc cutouts occupies most of the design, while the snail's body stretches out to the right and two small eyestalks rise from the head. The shell is built from concentric broken rings that leave thin solid bridges between segments, and the effect when lit is an intricate circular lantern orbited by a slow-moving creature. Cut the outermost arc segments of the shell first and work inward toward the central solid disc so the bridges hold until last.
Snarling Bat Pumpkin Stencil
A wide-winged bat stretches nearly edge to edge in this easy bat pumpkin stencil, its wing panels divided by bold vein lines and a snarling cartoon face centered in the body. The wings are the large pierced areas that glow brightest, while the vein lines and the face details remain as solid orange strips inside the cutout. Carve the small pointed fangs in the face before tackling the big wing panels, so the blade has firm pumpkin wall support when making those fine cuts.
Sneering Fangs and Slanted Eyes
A sinister face with narrow slanted eyes, a slim angled nose, and a wide sneering mouth bristling with pointed fangs top and bottom. Eyes, nose, and mouth are pierced clean through, with the fang shapes left as solid teeth jutting into the glowing opening. Even though it rates easy, the fang tips are fragile; cut each tooth from base to point and let the waste fall away instead of pulling it free.
Snowcap Peaks and Moon
A wide arched window is carved through the pumpkin with three mountain peaks left standing in dark silhouette, while a full moon glows from a separate round opening above. The sky area around the peaks gets cut away and small snowcap notches pierce the summits, so light outlines the whole range. Keep the peak silhouettes attached at the base as you saw the sky sections, since they anchor the entire scene.
Soccer Ball Pumpkin Stencil
A soccer ball rendered as a flat stencil pattern takes up the full face of this pumpkin carving design, with a central pentagon surrounded by curved hexagonal panels that radiate outward to the edges. The pentagon and several panel sections are cut through, while the curved connecting lines between panels remain as solid orange bridges, recreating the look of a classic black-and-white ball when lit. Carve the central pentagon first, then cut each surrounding hexagonal section in a clockwise order to keep even tension on the skin bridges.
Sombrero Pumpkin Stencil
A wide-brimmed sombrero fills this pumpkin stencil, its high rounded crown pierced as one large cutout and the broad brim divided by a decorative band of repeating V-shaped notches that form a row of open triangles along the lower edge. The hat brim is the negative-space opening, and the triangular notches add festive detail within it. Cut the triangular notches along the band first, from the center outward in each direction, so the thin pumpkin teeth between them remain stable while you remove the larger crown and brim sections.
South Carolina Heart Lettering
State pride spelled out plainly: a bold serif I, a big glowing heart, and the letters SC stacked in two rows across the pumpkin face. Each letter and the heart cut fully through, and the thick strokes make this an easy lettering carve with no fragile pieces. Cut the heart's top notch first to set its shape, then saw each letter stroke in straight runs, squaring the serifs from inside the openings.
South Carolina Pumpkin Stencil
The irregular outline of South Carolina, with its distinctive concave upper coastline notch and the jagged Sea Islands fringe along the lower right shore, is carved as a single pierced shape in this state pumpkin stencil. The entire interior is cut away, leaving only the border outline as the light-emitting shape. The lower coastal edge has the most complex jagged detailing, so cut that stretch last after the smoother inland borders are done, allowing maximum wall stability while navigating the short irregular coastal cuts.
South Carolina State Shape
South Carolina's distinctive triangle-like outline carved as one large glowing cutout, with the ragged coastal edge along the bottom right. The whole state shape is removed so light floods through it, while the rest of the pumpkin stays solid. The wavy coastline detail is where most of the work lives; use short sawing strokes and keep the blade upright so the little inlets stay defined instead of tearing.
South Dakota Pumpkin Stencil
South Dakota's near-rectangular outline, with its straight top and left borders and a stepped notch along the upper right where the Missouri River forms the border, plus a small jagged peninsula at the lower right, makes up this clean state pumpkin stencil. Almost all the edges are straight or gently curved, making this one of the more approachable state silhouette carves. Score and cut the straight left and top borders first since they set your orientation, then work around the subtle river-step notch and the irregular lower-right point last.
South Dakota State Shape
The full silhouette of South Dakota is cut through the pumpkin wall, glowing as one clean rectangular shape with the Missouri River notch tracing its jagged southeastern corner. Everything inside the border is removed, so the state reads instantly from across the yard. The medium rating comes from those small river-line zigzags; cut the long straight edges first, then slow down and nibble the notched corner in short strokes.
Spider Emblem Pumpkin Stencil
A stylized spider rendered as a graphic emblem fills this easy stencil: the body is split into a large oval abdomen and a smaller rounded head kept solid as orange pumpkin, while the eight legs radiate outward as broad curved blades that taper to sharp points, all backed by cut-out negative space. The overall silhouette has a bold, almost logo-like quality that glows dramatically when lit. Leave the narrow waist bridge connecting the head to the abdomen until last, since removing adjacent leg gaps early can put stress on that small connector.