Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
54 results · Page 2 of 2
Sinister Eyes Pumpkin Stencil
A pair of intensely glaring eyes fills this expert pumpkin stencil in a wide horizontal composition, with deeply furrowed brows, sharp inner-eye detail, and swirling flame-like linework around the eye sockets all rendered as intricate pierce cuts. The result when lit is a wall of illuminated eyes and chaotic energy that stretches across the pumpkin's face. Carve the small inner-eye iris details and fine flame points before opening the large eye-cavity cutouts, since those large voids will flex the pumpkin wall and make the remaining fine work harder to control.
Six-Slot Grin and Cheek Slits
Two arched, angry eyes glower above a huge crescent grin broken into a row of glowing tooth slots, with small slits flaring at each cheek. All the features are pierced through the wall, and the strips of rind left between the tooth openings become the dark teeth of the smile. Cut the mouth slots from the center outward and leave the narrow rind bridges at full thickness so the grin holds its shape.
Slant Brows and Triangle Eyes
Pure menace in four cuts: two big triangle eyes slanted inward in a hard glare, each topped by a thin detached brow slit angled the same way. All four shapes are cut through, and with no mouth at all the silent stare does the work. This is one of the easiest designs to carve and one of the most effective; keep the brow slits narrow and parallel to the eye tops so the angry angle stays sharp.
Slanted Eyes and Jagged Grin
A fierce horror face made of three bold shapes: two sharply slanted eyes that hook downward like angry slashes, and a wide zigzag mouth full of jagged points. Everything is cut through, so the whole face blazes with candlelight and reads clearly from the street. It is an easy carve despite the menacing look; use long straight cuts for each zigzag segment and the aggressive angles practically draw themselves.
Slanted Eyes and Six Slashes
A ferocious face glares out through slanted slit-pupil eyes above a fanged snarl, with three sweeping slash marks flaring from each cheek like whiskers of fury. The eyes, nostrils, toothy mouth, lower jaw slot, and all six cheek slashes are cut through the wall for a blazing, aggressive stare. At medium difficulty, save the long tapered slashes for last and cut them thin at the tips so they flick outward like real claw marks.
Slanted Eyes and Twin Fangs
A wicked jack-o'-lantern with sharply slanted eyes, a small triangle nose, and a curling grin pierced by two long fangs hanging from the upper lip. All the features cut straight through, and the fangs read as solid pumpkin left inside the glowing mouth opening. It is an easy carve overall; just remember the fangs are attached only at the top, so slice along their sides gently and never lever the knife against them.
Slanted Eyes and Zigzag Grin
The timeless sinister pumpkin: two sharply slanted eyes with hooked inner corners, a small angled nose notch, and a long zigzag mouth that saws across the lower face in jagged peaks. All five openings are cut clean through for maximum glow. It is rated easy because every shape is bold and open; the one spot that needs care is the zigzag mouth, where cutting into each point from both sides keeps the teeth from rounding off.
Sloping Eyes and Two Teeth
Two steeply sloping eyes scowl above a crooked grin holding two chunky square teeth, one notched into the top lip and one into the bottom. The eyes and mouth are pierced through, with the blocky teeth left as shell inside the mouth opening. Cut the outline of each tooth before clearing the rest of the mouth, and the asymmetry of the design means small wobbles only add to the attitude.
Sloping Eyes and Unequal Fangs
A classic evil jack-o'-lantern with steeply slanted triangle eyes glaring downward and a wide jagged mouth of uneven fangs, some long and some short for extra menace. All shapes are pierced through for a fiery glow. Rated medium because of the zigzag mouth; cut each fang point with two clean strokes meeting at the tip, and bevel the eye edges outward so more light escapes upward.
Snarling Split-Mouth Face
This snarling jack-o'-lantern glares through slanted, angry eyes above a flared triangular nose and a huge split mouth bristling with long fangs and jagged lower teeth. The eyes, nose, and mouth are all cut through, while thin skin bridges hold each fang in place against the glow. Rated hard because of those narrow tooth bridges; carve the fangs last with a fine saw and leave extra width until the final pass.
Sneering Fangs and Slanted Eyes
A sinister face with narrow slanted eyes, a slim angled nose, and a wide sneering mouth bristling with pointed fangs top and bottom. Eyes, nose, and mouth are pierced clean through, with the fang shapes left as solid teeth jutting into the glowing opening. Even though it rates easy, the fang tips are fragile; cut each tooth from base to point and let the waste fall away instead of pulling it free.
Split-Nose Zigzag Frown
A classic angry jack-o'-lantern face with two sharp slanted eyes, a split two-part nose, and a jagged zigzag frown of pointed teeth. All five openings are cut straight through the wall, leaving the rest of the pumpkin untouched for maximum contrast. It is an easy pattern with only a handful of pieces, so take your time on the zigzag mouth and cut each tooth point cleanly before pushing the waste piece out.
Swept Eyes and Melting Grin
A wicked jack-o'-lantern with two swept, flame-like eyes, a small notched nose, and an enormous melting grin whose edges drip and ripple across the lower half of the pumpkin. All features are pierced through, and the wavy mouth throws dramatic, uneven light. This is medium work with one long tricky opening, so carve the mouth in sections from the center out and leave the drippy lower points attached until the very end for support.
Triangle Eyes and Six Diamonds
This elevated take on the traditional face pairs slanted triangle eyes topped with thin brow slits, a triangle nose, and a deep zigzag grin, then adds three small diamond cutouts on each cheek for extra sparkle. Every element is pierced through the wall. The brow slits and little diamonds are what push it to medium; cut the big shapes first, then handle each diamond with a narrow saw, working point to point so they stay crisp.
Two Horns and Square Teeth
Two curved horns glow near the stem while slanted, angry eyes and a wide grin with square teeth complete this simple horned demon. Every feature is a pierced opening, and the shapes are big and forgiving, making it an easy carve with a wicked payoff. Cut the mouth as one band and notch the square teeth from the top and bottom edges so each tooth stays anchored to the wall.
Unequal Eyes and Jagged Grin
A nightmare grin stretches ear to ear, packed with dozens of jagged interlocking fangs, beneath two mismatched eyes, one wide and wild and one narrowed and crossed by scar lines, with flame like spikes radiating outward and diamond accents above and below. Nearly all of it is pierced through, leaving a web of thin rind spikes that demands real patience. Work from the center of the mouth outward with a fine saw, supporting each fragile spike as you free it on this expert carve.
Unequal Eyes and Six Slashes
A menacing sneer built from two uneven glaring eyes, a small skull-like nose, a crooked mouth of jagged teeth, and three claw-slash marks raking each side of the face. All shapes pierce through, and the mismatched features do the intimidating. A medium carve; cut the six narrow slashes first with single confident strokes, then work the mouth teeth before opening the larger eye shapes.
Wrinkled Eyes and Uneven Teeth
A mischievous scowling face with arched eyebrows over round glaring eyes, small wrinkle slits fanning from each eye's outer corner, diamond accents dotting the cheeks, and a sweeping smile packed with uneven square teeth. Every cut pierces through, so light streams from all the details at once. A hard carve where the wrinkle slits are the fussy part; cut those hairline slivers with a detail saw before opening the large eye holes beside them.