Pumpkin carving templates
572 free printable stencils. Download, print, trace, carve.
91 results · Page 3 of 3
Tiger Face Pumpkin Stencil
A full-face tiger portrait stares forward from this expert-level pumpkin stencil: the broad round head is ringed by a jagged fur ruff, two triangular ears with inner cutouts peek from the top corners, and the face is built from dozens of interlocking stripe-shaped cutouts that form the eyes, nose bridge, muzzle, and whisker spots. The lit result shows a photorealistic tiger rendered entirely in positive pumpkin bridges and negative glowing gaps. Work from the center of the face outward, cutting the small eye-iris pieces first before tackling the radiating stripe cuts that hold the whole design together.
Turkey Pumpkin Stencil
A plump, strutting turkey faces forward with wings spread and fan tail displayed on this expert-level animal pumpkin stencil. The design is a dense interlocking map of curved feather sections, body masses, and a detailed head with wattle, all separated by thin white bridges that must stay solid. Because so many narrow bridges cross each other, work from the outermost tail feather tips inward toward the body, removing each isolated section fully before moving to the next rather than skipping around.
Twisted Haunted Tree Pumpkin Stencil
A twisted, leaning haunted tree with gnarled branch-arms, a hollow face cavity with two small round eye holes, and exposed root tendrils sprawling across the ground makes up this expert tree pumpkin stencil. The writhing upper branches and root fingers are each narrow separate cuts, while the face hollow is the main open void at the center. Carve the largest root sections at the base first since they anchor the lower design, then progress upward through the arm-branches, leaving the thin finger-tip branches and the tiny eye circles for last.
USA Map Pumpkin Stencil
The contiguous silhouette of the contiguous United States is carved as a single open pierce-through in this expert pumpkin stencil. The intricate coastline, Great Lakes inlets, and Florida peninsula are all retained in the cut edge, requiring precise control all the way around the outline. Lit from inside, the pumpkin glows entirely through the mapped shape. Work clockwise around the perimeter without lifting your tool from the cut line, since re-entering the groove at a sharp angle like the Gulf Coast bays is the most common place where the wall cracks.
USA Map Pumpkin Stencil
The contiguous United States is carved as a single large pierced shape, with the internal state borders rendered as narrow solid ridges that remain after cutting away all the negative space inside each state. Alaska and Hawaii appear as separate inset shapes below the main landmass. When lit, each state glows individually, separated by hairline orange lines. The narrow state borders in the Northeast are the most fragile: carve those tiny states before removing the surrounding pumpkin wall so you have maximum support.
Vampire Count Pumpkin Stencil
A vampire count shown from the waist up dominates this expert pumpkin stencil: a swept-back widow's peak hairline, arched expressive brows, sharp angular cheekbones, a sneering half-open mouth, and a high-collared cape spread wide at the bottom. The face is built from many disconnected cut-out islands separated by thin pumpkin bridges, giving the lit design a dramatic stained-glass quality. Before cutting any facial details, map all the bridge lines carefully: the narrow strip between the brow and the cheek is the most fragile connector and must be preserved until the end.
Werewolf Face Pumpkin Stencil
A werewolf face in full-snarl fills the entire design with shaggy fur radiating outward in dozens of pointed spikes, wild round eyes, and a wide open mouth showing exposed fangs and tongue. The fur spikes are individually cut through and radiate from the face in all directions, creating an extremely dense, lacy pattern when lit. Work from the outer fur tips inward toward the face, cutting each spike cluster before moving to the face features; this keeps the many thin bridges between spikes intact and supported for as long as possible.
Werewolf Full Body Pumpkin Stencil
An expert-level werewolf pumpkin stencil depicting a muscular beast mid-stride, head thrown back in a snarl, clawed hands reaching forward, and fur rendered in dozens of jagged radiating cuts around the shoulders, arms, and legs. The face detail is dense: open jaws with visible fangs, heavy brow, and scattered facial fur cuts create a fiercely layered silhouette. Because many fur elements are isolated islands, tape a backing sheet over the stencil after transfer so small pieces cannot drop inside the pumpkin until you are ready.
Werewolf Pumpkin Stencil
A snarling werewolf portrait fills this expert pumpkin stencil from collar to crown: matted fur radiates around the brow, small rounded ear nubs press against the sides of the skull, heavy brow ridges overhang narrow angular eye slits, and bared fangs show at the lower lip. The face is built from many floating islands of pumpkin skin held together by thin bridges, so lit from within every feature reads in warm orange relief against the glowing gaps. Work from the smallest detail shapes outward, leaving the large forehead and cheek sections until last so the bridges keep all floating pieces locked in place.
Wild Ghost Face Pumpkin Stencil
A wild-haired screaming figure dominates this expert ghost pumpkin stencil, with electrified hair fanning outward in jagged lightning-bolt spikes, a detailed face showing a broad toothy grin, arched brows, and heavily shadowed cheeks, all built from interlocking curved and angular cut-through shapes. The spiked hair is the defining element, each spike tapering to a sharp point. Begin with the outermost hair spikes, cutting from tip to base, so their fine points are done before the large central face cavities are removed and the wall becomes more flexible.
Witch Cauldron Pumpkin Stencil
A round-bellied witch's cauldron sits on a small tripod base while a large plume of swirling smoke and flame rises above it, branching into curling tendrils with scattered circular bubble cutouts floating free in this witch pumpkin stencil. The cauldron interior is a large open void, the smoke tendrils are narrow pierced ribbons, and each bubble is a tiny individual circle punched through the skin. Cut the cauldron body first, then remove the larger smoke ribbons; leave the small bubble circles for last and use a round drill bit or small gouge to keep them clean.
Witch on Broomstick Moon Pumpkin Stencil
A witch on a broomstick flies across a full moon in this expert pumpkin stencil, her pointed hat, flowing robes, and broom bristles silhouetted against a circular background of ragged cloud cutouts. The witch figure is solid orange skin set against the large glowing moon disc, and the cloud tears around the moon's edge are pierced through. Carve the small jagged cloud tears around the moon perimeter first, then carefully outline the witch silhouette, leaving her as an uncut island of skin inside the open moon.
Witch Silhouette Pumpkin Stencil
A full-length witch figure stands in this expert pumpkin stencil, crowned by a tall pointed hat with a wide brim, her long flowing robes splitting into jagged tapered strips that trail toward the ground, bony fingers extending from her sleeves, and a curling decorative element at the hem. The design is built from many narrow vertical cut-through strips separated by very thin orange bridges, giving the finished carving an almost lace-like quality when lit. Work from the hat point downward, cutting each robe strip individually before widening cuts near the base where the shapes are broader.
Witch with Staff Pumpkin Stencil
A robed witch figure stands holding a tall staff topped with a flame in this expert pumpkin stencil, her pointed hat bearing a spiral curl at the tip and wisps of energy trailing her cloak and pooling at her feet. The design reads as a solid silhouette with strategic interior cuts for the face, flame, and cloak detail, so candlelight halos the entire figure while the fine interior strips glow separately. Keep the narrow bridge connecting the flame to the staff intact until last, as it is the most likely point to snap under blade pressure.
Witch with Staff Pumpkin Stencil
A robed witch stands arms wide inside a large circular moon, gripping a tall staff crowned with a starburst, while jagged flame shapes rise from the ground at her feet in this expert-level witch pumpkin stencil. The large moon disc is pierced open, and the witch figure is left as a solid pumpkin-skin silhouette within it, creating a glowing halo effect around her when lit. The staff is the most isolated element, connected to the composition only by a thin wrist bridge, so leave it uncut until every surrounding section is finished.
Zombie Figure Pumpkin Stencil
A gaunt zombie figure lurches upright in this jack-o-lantern pumpkin stencil, its hollow skull face and long clawed fingers pierced through while ragged, tattered robes form the solid silhouette below. Scattered debris fragments float around the body as isolated cut-out shapes, creating an eerie sense of motion when lit. Carve the small floating fragments last, using a narrow detail blade to keep each piece from cracking away from the main composition.
Zombie with Chainsaw Pumpkin Stencil
A ragged zombie grips a chain-saw overhead while bursting through a set of vertical window bars on this expert zombie pumpkin stencil, its tattered body and grimacing face rendered in a detailed silhouette-plus-bridge style. The three vertical bar strips are the primary structural elements holding the upper and lower halves of the design together; do not cut them. Work from the outer edges of the figure inward, and carve the zombie's small face detail islands before removing the large surrounding body void.
Zombie with Skull Pumpkin Stencil
A tall zombie figure stands upright inside a large oval frame in this expert-level pumpkin stencil, one arm raised and holding a dripping severed skull. The body is rendered as a jagged silhouette of tattered flesh and clawed feet set against the solid oval background, while the skull dangling from the raised hand adds a second, smaller focal point within the composition. Because the zombie's body is a narrow silhouette surrounded by the large pierced oval, cut the oval background first and leave the figure's connection points at the base until last to keep the thin leg and claw details from breaking free prematurely.
Zombies Pumpkin Stencil
The word "ZOMBIES" in dripping, horror-font letters anchors this stencil, with a row of grasping undead arms and hands rising above the text from a pool of slime below. All the negative space around the letters and arms is cut away, leaving the drip shapes and reaching fingers glowing against the pumpkin flesh. The thin drip strands between letters are the most fragile part of this carving, so cut each letter interior first and leave the connecting drips until the very end.