Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
147 results · Page 4 of 5
Tall Triangles and Broad Smile
This is the timeless jack-o'-lantern: two tall triangle eyes, a small triangle nose, and a broad crescent smile, all cut straight through the shell. With only four openings and no fragile details, it is an ideal first carve for a new pumpkin carver. Poke pilot holes at each triangle corner before sawing so your straight lines meet exactly where they should.
Tall Triangles and Open Smile
Two tall triangle eyes and a wide open smile with a single pointed upper notch make up this timeless jack-o'-lantern face, shown here glowing warmly from an ivory white pumpkin. Every shape is a straightforward cut-through with no attached pieces to protect. It is as easy as carving gets: make long straight cuts for the triangles and let the knife follow the smile's curve in smooth strokes, and it looks brilliant on white or orange pumpkins alike.
Tall Triangles and Twin Teeth
The timeless jack-o'-lantern: two tall triangle eyes, a smaller triangle nose, and a wide friendly smile interrupted by two blocky teeth, one dropping from the top lip and one rising from the bottom. All four shapes are cut straight through for that classic warm glow. This easy pattern is ideal for a child's first supervised carve; make each triangle in three straight cuts and push the pieces out from inside the pumpkin.
Tears of Joy Emoji Pumpkin Stencil
This emoji pumpkin stencil captures the classic tears-of-joy face: a large circular outline frames squinting crescent eyes, a wide open-mouth smile, and two teardrop shapes streaming from the outer eye corners. Most of the interior is pierced through, leaving thin curved bridges for the eyes, brow shapes, and a tongue strip inside the mouth. When lit, the laughing face reads instantly from across a porch. Keep the two small teardrop cutouts for last, as they are isolated from the main body and can shift if the stencil loosens.
Texas Heart Lettering
Big serif letters read I, heart, T, X, stacked in two rows with a bold heart doing the talking. Each character is its own clean cut-through opening, making a Lone Star porch statement you can finish in one sitting. Keep the letter strokes at least a finger wide as you carve; the thin serifs are the only place this easy pattern can get fussy.
Three Rainbow Arches
Three nested arches stack like a glowing rainbow, each band cut fully through so the pumpkin lights up in bright concentric ribbons. The strips of pumpkin left between the arches form the rainbow's dark bands and keep the wall sturdy. It is an easy design with big visual payoff; cut the smallest inner arch first and work outward, and keep the leftover ribs at least half an inch wide so they stay strong.
Three Rainbow Arcs and Clouds
Three nested rainbow arcs stretch across the pumpkin, each end tucking into a puffy little cloud at the bottom corners. The arcs and clouds all cut through the wall, and the thin ribs of skin left between the arcs are what give the rainbow its striped look. Cut the innermost arc first and work outward, supporting each rib with your free hand so those curved strips do not snap.
Three Rainbow Arcs and Sun
Three nested rainbow arcs curve over a low half circle sun, filling the bottom of the pumpkin with stacked bands of light. Each arc is cut through while narrow ribs of rind stay between the bands, which is what creates the layered glow. Keep those ribs at least half an inch wide as you carve this medium design, since they carry all the structure.
Thumbs Up with Six Rays
A big thumbs-up hand surrounded by six radiating burst lines, like a glowing seal of approval for every trick-or-treater. The hand itself is sculpted in relief with shaved shading across the knuckles and thumb, while the outline gap and ray lines are carved deeper so light halos the whole gesture. Rough in the hand shape shallow at first, then deepen the shadows between the fingers gradually to keep the knuckles reading clearly.
Tilted Laugh with Two Tears
This tilted laughing face leans hard to one side, with two squinted arrow eyes, a huge open grin, and a teardrop of joy flying off each corner. All the features cut fully through, and the diagonal tilt is what makes it read as the crying-laughing emoji everyone knows. It rates hard because the squint lines and tear droplets are small, so use a fine saw and drill-start each tiny opening before cutting.
Triangle Crown Face
A tiny wide-eyed face with a sweet smile sits low on the pumpkin beneath a crown of triangles and diamond sparkles arching overhead. All the shapes are pierced through, from the big round eyes down to the small candy corn style points. The hard part is spacing; transfer the pattern carefully and carve the little crown pieces with a detail saw so each point stays sharp.
Triangle Eyes and Crescent Grin
A bold traditional design pairing two big triangle eyes with a wide crescent grin crossed by chunky square teeth top and bottom. All openings pierce the wall completely, so the face burns bright on any pumpkin, including green or white varieties. An easy carve with generous shapes; free the tooth gaps first, then cut the long smile curve in sections so the grin keeps its clean sweep.
Triangle Eyes and Twin Teeth
The timeless jack-o'-lantern: two bold triangle eyes, a matching triangle nose, and a wide friendly smile with two square teeth breaking the curve. Every feature is cut fully through, leaving the rest of the pumpkin smooth so the glowing shapes do the talking. Straight lines make this an ideal easy carve; score the triangles with a ruler edge first and the cuts will fall right in place.
Triangle Face and Lower Teeth
The most traditional face in the patch: two triangle eyes, a triangle nose, and a wide smile interrupted by two square teeth rising from the lower lip. All five shapes cut straight through with no curves to fight, making this an ideal first carve. Push the saw in straight vertical strokes and finish each triangle corner cleanly from both sides before popping the piece out.
Trick or Treat Pumpkin Stencil
A bold typographic pumpkin stencil spelling out TRICK OR TREAT in three stacked lines of wide block stencil letters, each character separated by narrow bridges that keep the letterforms readable when carved through. The large open interiors of the letters glow with even, full-face brightness when lit. Cut enclosed letter counters, the circular center of the R and the inside of the O, before removing the surrounding letter bodies, so those islands stay in position while you work.
Twenty-Two Ray Smiling Sun
A beaming sunburst face with closed happy crescent eyes, a small triangle nose, and a huge picket-tooth grin, all encircled by a radiating ring of alternating teardrop and triangle ray cutouts. Every ray, tooth gap, and feature pierces through, and the sheer count of small openings makes it an expert carve. Cut the outer rays in sequence around the circle first, rotating the pumpkin as you go, before opening the large mouth.
Two Lower Teeth Smile
This cheerful jack-o'-lantern face pairs two big round eyes with a wide open grin interrupted by a pair of goofy buck teeth. The eyes and mouth are cut all the way through, while the two square teeth are left attached to the top lip. Since it is an easy carve, just take care around those teeth: cut the mouth opening around them and leave each tooth anchored so it does not snap off.
Unequal Eyes and Crooked Smile
A charmingly wonky face with one huge oval eye, one small squinting eye, and a crooked smile that tilts up at the corner. Everything cuts through, and the mismatched shapes are the whole joke, so wobbly lines only add character. This is a forgiving easy carve for kids' first attempts or oddly shaped pumpkins; cut the big eye last since the wall flexes more once the large opening is removed.
Unequal Eyes and Opposed Teeth
A lovably lopsided face: one huge round eye beside one small one, over a wide wavy smile with a single square tooth poking down and another poking up from opposite sides. Every shape is a cut-through, and the deliberate asymmetry is the whole joke. This easy design forgives wobbly lines since crooked only makes it funnier; just keep the two teeth attached by cutting around them, not across their bases.
Unequal Eyes and Scallop Grin
A wonderfully odd face with two unequal eyes split by vertical bar pupils, a diamond nose, and a huge grin whose lower edge scallops into rounded lobes, all surrounded by constellations of freckle dots and hanging teardrop points. Everything is cut through, from the big mouth down to dozens of tiny drilled holes. This expert design is a marathon of small cuts; drill all the freckle dots first, then carve the scalloped grin so the thin borders between lobes keep support.
Unequal Eyes and Tongue Grin
This mischievous face pairs one big round eye with a smaller sly one under arched brows, above a sprawling grin full of gapped teeth and a tongue-shaped opening lolling out below. Clusters of drilled dots frame each cheek like a glowing gridwork of freckles. It is all cut-through work with many narrow tooth bridges, so use a fine saw, cut the dots first, and support each bridge as you free the mouth pieces.
Unequal Heart Eyes and Smile
Inspired by the heart-eyes emoji, this lovable face pairs two big heart-shaped eyes with a broad crescent smile. All three openings are cut fully through, so the hearts beam bright pink-orange light after dark. The gentle notch at the top of each heart is the only fiddly spot in this easy carve; poke a starter hole in the middle of each heart and saw up into the notch from inside so the point stays sharp.
Uneven Eyes and Five Teeth
A mischievous jack-o'-lantern with deliberately uneven eyes under slanted brows, a triangle nose, and a huge crooked grin interrupted by five hanging teeth. All the features are pierced clean through so candlelight pours out of every gap. The teeth are the trickiest part at this medium level, so cut around each one slowly and leave those tabs attached to the rim of the mouth.
Uneven Eyes and One-Tooth Grin
A timeless porch-ready jack-o'-lantern with two slightly uneven oval eyes, a small triangle nose, and a long friendly smile broken by a single square tooth. All four openings are generous cut-through shapes, so beginners can saw steadily without worrying about fragile bridges. Angle your blade slightly outward as you cut so each piece pops free toward you and the glow spreads wider at night.
Utah Heart Lettering
A two-row hometown tribute: a serif I beside a full heart on top, with big U and T letters below, every shape cut through to glow warmly at night. The letterforms are thick and simple, so this carves quickly. The U's inner curve is the only tight turn; saw it in two passes meeting at the bottom of the arc so the inside edge stays smooth.
Vermont Heart Lettering
Classic hometown pride: a bold letter I beside a chunky heart on the top row, with big block letters V and T beneath, spelling out love for Vermont. All four elements are cut fully through in thick, forgiving strokes, which keeps this an easy carve despite being lettering. Cut each character from the inside of its outline and leave generous rind between the rows, since block letters stay readable even if your lines wobble a little.
Vintage Arches and Round Grin
Arched triple line brows curl above big eyes divided by rind bars, a long triangle nose drops between them, and a huge grin shows a full row of rounded teeth with dotted curlicue accents swirling at each cheek. All the openings are cut through in a cheerful retro style straight off an old holiday postcard. Rated hard for its many small dots and thin brow lines, it rewards a fine detail saw and a drill for the dots.
Waving Ghost with Four Lobes
A friendly little ghost lifts one stubby arm in a wave, its four-lobed hem trailing below round eyes and a happy open mouth. The whole figure is shaved shading: you remove skin inside the body so it glows softly, then leave the eyes and mouth as raised uncarved pumpkin. Even, shallow shaving is all it takes, which makes this a forgiving introduction to etching.
White-Pumpkin Happy Face
A cheerful jack-o'-lantern face with big rounded eyes, a small triangle nose, and a wide crescent smile with a single square tooth. Every feature is fully cut through, so the whole face glows once a candle goes in. It looks especially striking on a white pumpkin, where the warm light pops against the pale skin. An easy first carve; just leave the little bridge above the tooth intact so the grin holds its shape.
Wide Crescent and Short Teeth
The timeless jack-o'-lantern: two triangle eyes, a triangle nose, and a wide crescent grin broken by a few short square teeth left in place. Every shape is a straightforward cut-through, making this an ideal first carve of the season. Cut each triangle in three straight strokes that meet at the corners, and leave the teeth generous so they do not snap off.
Wide Grin and One Broad Tooth
Made for short, squat pumpkins, this goofy face pairs two upswept triangle eyes with an enormous grin interrupted by a single broad tooth hanging from the top lip. The eyes and mouth are cut through, and the tooth is simply a block of shell left in place inside the smile opening. Cut around the tooth carefully on both sides before removing the mouth pieces so it stays firmly attached.
Wide Smile on a Warty Pumpkin
Two big triangle eyes and a huge upturned crescent smile turn any bumpy heirloom pumpkin into a cheerful classic jack-o'-lantern. All three shapes are simple cut-through openings, so warts and ridges on the shell only add character around the glow. This easy pattern is perfect for a first carve; make long smooth strokes along the smile and pop each triangle out in one clean piece.
Wink and Barred Square Grin
One huge round eye stares while the other squeezes into a curled wink above a giant open grin packed with blocky square teeth, and freckle dots sprinkle each cheek. The eyes, mouth, and freckles all cut through the wall, with skin bridges left in place to form the teeth. Cut the mouth's outer outline first, then remove the gaps between teeth one at a time so each block stays anchored.
Wink and Five Rounded Gaps
One eye is a jaunty upswept crescent wink while the other stays a wide triangle, set over a small diamond nose and a lopsided grin broken into five rounded gaps by chunky teeth. The eyes, nose, and mouth gaps are cut through, leaving the tooth shapes as attached skin between them. A medium carver should cut the five mouth gaps individually rather than one big mouth, which keeps every tooth solidly connected and the crooked smile intact.
Wink and Split-Tongue Smile
A playful winking face sticks its tongue out at trick-or-treaters: one round eye is a full cutout, the other a squeezed-shut winking arc, above a wide grin with a dangling split tongue. The face ring, eyes, and mouth are pierced through while the tongue stays attached as a bridge of pumpkin. Cut around the tongue last and leave it slightly thicker than the line for strength.
Winking Seven-Tooth Grin
A goofy winking jack-o'-lantern with one wide round eye, one squinting wink, a triangle nose, and an enormous grin broken up by a jumble of square and pointed teeth along both lips. Every feature is cut clean through so the mismatched expression beams from the whole face. At medium difficulty the mouth is the main event; cut the grin outline first, then shape each tooth individually, alternating sides so the lip strips stay supported.