Pumpkin carving templates
572 free printable stencils. Download, print, trace, carve.
572 results · Page 6 of 16
German Shepherd Pumpkin Stencil
A German Shepherd in a proud alert stance fills this pumpkin stencil as a single clean silhouette: erect pointed ears, a strong muzzle, a deep chest, and a slightly tucked hindquarter all captured in an unbroken outline with no interior cut-outs. When carved, the whole dog shape is one large pierced-through opening that glows as a pure bright silhouette against the dark night. Because the design has no internal bridges to worry about, trace the outline slowly and keep the cut continuous, paying extra attention to the sharp ear tips and the fine fur texture along the belly line, which can tear if the blade catches.
Ghost Emoji Pumpkin Stencil
The ghost emoji comes to life in this beginner pumpkin stencil: a wide-eyed ghost body with one large circular eye and one smaller dot eye, a gap-toothed open mouth with a dangling tongue, two draping arms with pointed tips on each side, and a looping curved tail below. A raised brow arc sits above the eyes. The ghost body outline remains solid while the eyes, brow, mouth, tongue, and tail gaps are cut through. Cut the small eye dot and brow arc first, then the tooth gaps in the mouth before opening the larger arm-side cutouts.
Ghost Mask Pumpkin Stencil
A ghost-faced horror-movie mask is the subject of this easy pumpkin stencil: an elongated oval skull shape with two large teardrop eye cutouts, a small oval nose hole, and a wide gaping mouth that tapers to a pointed chin. Flowing tendrils extend from the lower sides of the mask. The three facial openings glow as three distinct shapes, and the flowing lower extensions give the mask a draping, spectral quality when lit. Cut the narrow nose piece first since it sits between the two large eye openings and is the most vulnerable to tearing.
Ghost Reaper Pumpkin Stencil
A faceless hooded ghost figure clutching a large scythe stands amid swirling ground-level mist and gnarled branch tendrils in this hard ghost pumpkin stencil, the entire composition built from one connected silhouette with the robe edges and mist tendrils forming narrow cut points. When lit, the reaper-ghost and the curling ground fog glow together as a single haunting shape. Cut the thin mist tendrils at the base and the ragged robe hem first, then work upward to the broader robe body and the diagonal scythe shaft.
Ghost with BOO Balloon Pumpkin Stencil
A small ghost holds a round balloon with the word BOO written on it in this hard ghost pumpkin stencil, the balloon rendered as a thin open circle with letter cutouts and the ghost below it as a rounded blob with oval eyes and a wavy hemline. Both figures are outlined by thin curved lines that remain solid orange, so when lit the design shows glowing ribbons of light tracing the balloon string, the ghost body, and the BOO lettering. The string connecting the balloon to the ghost's hand is a single narrow line that must be cut last to keep the two halves of the stencil from shifting apart mid-carve.
Giant Panda Pumpkin Stencil
A giant panda sits upright in this easy pumpkin stencil, its chunky arms raised wide, rounded ears perched on top, and oval eye patches, a small nose, and a belly spot forming the face and body markings. The large body shape, the eye patches, and the surrounding negative space are cut through in layers, while the connecting bridges between ears and head and between arms and body stay solid. Carve the smaller eye patch ovals before the large outer body cut to avoid the face area shifting while you work the perimeter.
Giraffe Pumpkin Stencil
A giraffe's elongated head and neck fill this pumpkin stencil from top to bottom, its distinctive coat pattern recreated as dozens of organic blob-shaped spots scattered across the neck and face. Each spot is a separate pierced-through opening, so when lit the jack-o-lantern glows with a constellation of irregular patches that read unmistakably as giraffe markings. Because many spots sit close together, cut the smallest spots near the top of the head first and work downward toward the larger neck patches, so the thin walls between neighboring openings stay supported longest.
God Bless America Pumpkin Stencil
Bold block lettering spelling "GOD BLESS" arches above a full American flag, with the canton's grid of 50 open stars and seven horizontal stripes cut through below, and "AMERICA" in wide stencil letters across the bottom of this pumpkin stencil. The stars are the most demanding element: each is pierced individually while thin pumpkin skin forms the canton background. Cut the stripe sections and base text first, then work through the star field from the center outward to keep the canton wall stable.
God Bless the USA Pumpkin Stencil
Bold block lettering spells out "GOD BLESS THE U.S.A." across two lines, with small five-pointed stars separating the letters in the lower line. The upper row uses chunky serif-style caps and the lower row uses even larger, slightly decorative capitals. Every letter interior is pierced through so the full phrase blazes when the pumpkin is lit. Keep the thin straps of orange between adjacent tall letters intact as you carve, since they carry the structural load of the entire upper row.
Golden Retriever Pumpkin Stencil
A golden retriever's face looks straight out from this easy pumpkin stencil: wide floppy ears, a broad forehead, round eyes with small arched brows above them, a large nose, and a happy open mouth with tongue showing are all carved as pierce-throughs. The ears are the largest cut areas and frame the face with an even glow. When the pumpkin is lit, the dog's expression reads as warm and friendly. Carve the small eyebrow arches before removing the large ear sections, since the brows are thin and easy to lose once the nearby wall flexes.
Goldfish Pumpkin Stencil
A plump goldfish shown in profile swims to the right: a rounded body, a large flowing tail fin swept back dramatically, a smaller dorsal fin on top, and a single pectoral fin near the belly. A small negative-space teardrop inside the body suggests the gill line. The whole fish is a single connected cut-out, so the lit pumpkin casts one glowing fish silhouette against the dark wall. Keep the narrow pectoral fin intact as long as possible and cut it free only after the main body is removed.
Golf Cart Pumpkin Stencil
A golf cart seen from the side dominates this sports pumpkin stencil, showing a round-headed driver at the wheel, a bag of clubs clipped to the back, a flat roof canopy overhead, and two large circular wheels below. The cart body is a single large pierced-through shape, while the roof bar, wheel wells, and club bag read as distinct solid bridges that light outlines when the jack-o-lantern is lit. Start by cutting the two big wheel openings at the bottom so the lower wall is relieved before you work upward toward the narrower details around the driver's head.
Gone Fishin Pumpkin Stencil
A fisherman standing in the bow of a flat-bottomed bass boat casts a long fishing rod overhead, with water ripples beneath the hull and the words GONE FISHIN' in stencil-style block letters below the scene on this pumpkin stencil. The silhouetted angler and boat hull are cut away entirely, while the thin rod line and letter counters remain as skin bridges. Carve the compact fisherman-and-boat silhouette first, then tackle the letter row below, saving the closed-counter letters for last.
Googly-Eyed Ghost Pumpkin Stencil
A cartoonish goggle-eyed creature with a wide open mouth and trailing ghost-like body fills this pumpkin stencil: two circular eyes each orbit a crescent-shaped eyelid, and a broad flowing torso dissolves into wispy tendrils at the base. The large open area of the body is pierced through entirely, while the eye elements and a small beak-like mouth cutout remain as floating islands bridged by thin pumpkin walls. Cut the smallest interior eye details before the large body opening so the bridges stay supported and the delicate crescent lids don't snap under tool pressure.
Graveyard Scene Pumpkin Stencil
A wide panoramic graveyard scene fills this pumpkin stencil from edge to edge: a gnarled bare tree dominates the right side with spidery branches, a crescent moon peeks above the tree line, two bats fly near the top left, a row of varied tombstones stretches across the middle ground, and a foreground of jagged dead grass and roots fills the bottom. All elements remain connected as a single cut sheet of pumpkin wall with the background space pierced away, so the entire scene glows in silhouette. Carve the bat shapes and moon sliver at the top first while the tall tree branches above them still anchor the upper wall.
Graveyard Scene Pumpkin Stencil
A bare, gnarled tree with reaching branches, a perched owl, two flying bats, and a cluster of cemetery cross tombstones fill a large crescent-moon frame in this expert graveyard pumpkin stencil. Nearly every element is a carved pierce-through, leaving thin orange bridges for the tree branches and tombstone edges. The lit pumpkin produces a richly detailed haunted graveyard scene. Start with the smallest elements inside the scene, such as the owl silhouette and the cross details on each tombstone, before the large moon arc is removed and the frame loses rigidity.
Great Horned Owl Face Pumpkin Stencil
A fierce great-horned owl face looms forward in this expert pumpkin stencil, with two large almond-shaped eye cavities framed by heavy curved brow ridges, a sharp pointed beak at center, ear tufts sweeping upward and outward, and dense spiky feather tips radiating outward from the face. The background within each eye cavity and around the brow is cut away in multiple sections, while the beak, brow ridges, and outer feather spikes stay solid as orange bridges. Begin with the eye cavities early to anchor symmetry, then cut the spiky outer feather tips last since they are the most likely to snap.
Great White Shark Pumpkin Stencil
A great white shark lunges in profile across this animal pumpkin stencil, jaws open to reveal a row of serrated teeth, a round dot eye, a prominent dorsal fin, a pair of pectoral fins mid-body, and a forked tail sweeping back to the right. The body interior is cut away in a large open section while the teeth, fins, and eye detail stay as solid bridges of pumpkin skin, letting candlelight define the shark's menacing outline from within. Cut the mouth and individual tooth points before opening the large body cavity so the head stays anchored while you work the fine detail.
Grim Reaper Pumpkin Stencil
A compact cartoon Grim Reaper stands front-facing with a skull face peering out from a rounded hood, angular raised arms gripping a long diagonal scythe pole, a blocky robe body with visible feet, and a small wisp of ground fog at the base on this hard pumpkin stencil. The scythe blade is a large separate curved cutout at the upper right, while the skull face features two angular eye holes and a small nose cutout. Cut the scythe blade first since it is isolated and large, then the hood opening, skull details, and robe voids in that order.
Grim Reaper Pumpkin Stencil
A shrouded Grim Reaper grips a scythe overhead in this expert-level pumpkin stencil, packed with dozens of jagged, flowing cut sections that render tattered robes, bony fingers, a skull face peering from the hood, and a second smaller skull on the chest. The design reads as a dense web of orange skin bridges surrounding numerous glowing cutouts. Tackle the smallest interior cuts around the skull face first so you have full stencil support, then work outward through the robe details toward the large robes and scythe blade.
Grim Reaper Pumpkin Stencil
A hooded Grim Reaper face looms from within a tattered, wind-swept cloak in this expert pumpkin stencil, its skull face showing deep-set eye sockets, a skeletal nose cavity, and rows of exposed teeth, all surrounded by jagged cloak edges that dissolve into flame-like wisps at the bottom. Dozens of small cuts through the cloak fabric, face, and shroud edges create a complex web of glowing gaps. Tackle the most crowded area, the teeth row, first when your hands and the pumpkin are both fresh, then spiral outward to the cloak wisps.
Grim Reaper Pumpkin Stencil
A flowing Grim Reaper figure grips a long scythe at chest height, its hooded skull face glowing with hollow eye sockets as the ragged robe billows outward below. The curved scythe blade arcs dramatically across the top of the composition. Lit from within, the open robe hem, skeletal hands, and skull interior create a layered halo of light around the solid hood shape. Carve the large open robe sections last so the scythe blade, the most slender element, stays braced by the surrounding pumpkin wall while you work.
Grim Reaper with Scythe Pumpkin Stencil
A hooded Grim Reaper leans forward gripping a large curved scythe, its skeletal face visible inside the cowl, and tattered robe edges dissolving into ragged fringe at the bottom in this expert grim reaper pumpkin stencil. The composition reads as a single dramatic figure, with the scythe blade sweeping up behind the figure and the robe tatters creating many thin separate cuts below. Carve the robe fringe tatters at the base first, since those narrow flame-like cuts are the easiest to crack once adjacent large sections of the torso are removed.
Grinning Ghost Pumpkin Stencil
A cartoonish ghost with a jagged, wide-open grin full of pointed teeth flies across this easy pumpkin stencil. Wild claw-like hands reach out from the sides, and a wisp of tail curls below. The ghost body and the negative spaces inside the grin are both cut through, while the pointed teeth are left as solid pumpkin wall. When lit, the teeth appear as dark orange spikes floating in the glowing mouth. Carve the jagged mouth points with slow, deliberate strokes rather than trying to follow the zigzag in one continuous cut.
Grinning Jack-o-Lantern Pumpkin Stencil
A grinning jack-o-lantern face carved within a jack-o-lantern stencil: a swirling curly stem at the top, two angled brow-cuts above a large square single-nostril eye, and a wide-open mouth whose upper lip forms a jagged row of sharp saw-tooth teeth with a single large central fang dropping from above. The mouth cavity is enormous relative to the face, giving the design its signature frenzied look. Cut the curl of the stem and the tiny eye detail first, then the saw-tooth teeth from the outer corners inward so the narrow points stay supported until the large mouth cavity is opened last.
Halloween Graveyard Scene Pumpkin Stencil
A fully populated Halloween graveyard scene spans this expert pumpkin stencil: a bare dead tree at center with a jack-o-lantern hanging from one branch, two grinning jack-o-lanterns on the ground, a skeletal hand rising from the earth, a cross headstone, a wrought-iron fence section, a smaller rounded grave marker, a winged ghost in the upper left, and two bats in flight at the top right. All elements are connected along a common ground line with dozens of individual floating pieces throughout. Work from the upper corners inward, cutting bats and ghost first, then the tree, so the center ground elements are cut last while the skin is most rigid.
Hammerhead Shark Pumpkin Stencil
A hammerhead shark cruises horizontally across this pumpkin stencil, its body a wide flat silhouette with a tall dorsal fin, swept pectoral fins, and the distinctive wide rectangular head that gives the species its name. The entire shark body is one single large open cut-out, so the finished jack-o-lantern glows with a full bright shark shape against the dark pumpkin skin. Position the stencil so the shark's tail end and dorsal fin tip stay at least one inch from the pumpkin's edge, which keeps enough wall intact to stop the broad head from drooping under its own weight.
Handlebar Mustache Pumpkin Stencil
A wide, curling handlebar mustache is the sole design element of this introductory pumpkin stencil, carved as a single large open shape that sweeps across the pumpkin face. The ends curl upward and outward in tight spirals, while the center dips in a gentle U. The entire mustache is pierced through as one connected opening, so the glow reads as a bold, immediately legible silhouette. Because the cut is one continuous piece, score the center dip first and work outward toward each curled tip to keep the shape from shifting as material is removed.
Happy Birthday Pumpkin Stencil
Bold block-letter text reading HAPPY BIRTHDAY fills this pumpkin stencil in two stacked rows of chunky stencil font, with each letter interior cut away and the letter strokes left as solid pumpkin skin. The design spans nearly the full face of the jack-o-lantern, making it a wide, flat carve with very little negative space. Because the closed counters inside letters like B, D, and P are floating islands of skin, carve the letter surrounds first, then carefully cut the inner counter openings to avoid dislodging them prematurely.
Happy Halloween Drip Text Pumpkin Stencil
The words HAPPY HALLOWEEN wrap across this pumpkin stencil in a wide dripping horror typeface, the tall letters of HALLOWEEN spanning the full width of the pumpkin in a single solid banner with icicle-like drips hanging from each base. The smaller word HAPPY sits above in a lighter display face. All letters are carved as open cut-outs connected edge to edge, forming a wide horizontal band of glowing text. Thin the pumpkin wall to about half an inch across the whole text zone before carving, because the long horizontal band removes a large section of structural support and a thinner wall is easier to keep from cracking under the blade.
Happy Halloween Text Pumpkin Stencil
The words HAPPY HALLOWEEN appear in two stacked lines of wide block capital letters in this pumpkin stencil, the typeface clean and bold with squared serifs and open counters inside letters like A, P, O, and E. Every letter is a cut-through opening, so the lit jack-o-lantern displays a glowing two-line greeting. Before carving, identify the enclosed counter islands inside closed letters such as the inner triangles of A and the inner ovals of O and P, and cut those small interior pieces out first so each island stays anchored until its surrounding letter walls are removed.
Happy Vampire Pumpkin Stencil
A cheerful jack-o-lantern face with vampire character fills this beginner-friendly pumpkin stencil: two large arching eye openings each cradle a small solid half-moon pupil, a small heart-shaped nose cutout sits in the center, and a wide grinning mouth shows two prominent pointed fangs flanked by rows of square teeth. Each feature is a distinct pierced-through shape separated by solid pumpkin bridges. Start with the heart-shaped nose and the small pupil islands inside each eye before opening the bigger eye arches, so those internal solid pieces stay anchored while you work.
Haunted Church Pumpkin Stencil
A tall, narrow haunted church or castle rises in this pumpkin stencil, with a central spire topped by a cross, two flanking branch-like towers each capped with crosses, arched windows, and square window panels scattered across the facade. The entire structure is cut out as a series of interconnected shapes against the solid pumpkin face. Carve the small window squares and the tiny cross tops first, working top to bottom, so the tall thin towers stay structurally sound until the end.
Haunted Church Pumpkin Stencil
A tall, narrow gothic church building with a cross at its steeple peak forms this haunted-house pumpkin stencil. Flanking the spire are two dead trees rendered as diagonal stick shapes with crosshatch window-pane details, and a row of grass tufts sits at the base. The arched doorway and tall multi-pane windows are the primary cut-through openings, while the church walls, trees, and ground remain solid. Cut the small rectangular window panes in the trees first, then the main church windows, so the thin tree branches stay anchored while you work.
Haunted House Moon Pumpkin Stencil
A tall haunted mansion with jagged roofline towers, arched windows, and a wide front door fills the center of a large circular moon cutout in this pumpkin stencil. Two bats flank the upper towers, and tufts of grass sprout at the base. The moon circle is the main open cut, while the house is retained as pumpkin wall, glowing orange against the dark void. Carve the rectangular window openings and the door arch before cutting the surrounding moon circle, so the house structure has support while you work the fine edge details.
Haunted House Pumpkin Stencil
Two stacked haunted house facades make up this easy pumpkin stencil: an upper story with a steep peaked roofline and a tall arched window topped by a smaller rectangular pane, then a lower story with its own peaked roof, a grid window, and a rounded arch doorway, all sitting on a narrow uneven ground strip. The cut sections are the rooflines, windows, door, and ground strip, while solid pumpkin bridges between them keep the tiers separate. Cut the smallest window panes first so the surrounding structure stays rigid while the larger roofline panels are removed.