Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
302 results · Page 6 of 9
North Carolina State Shape
North Carolina stretches across the pumpkin as one long glowing cutout, from the pointed western mountain tip to the fringed Outer Banks coastline on the right. The entire state interior is removed so the distinctive wedge shape reads clearly at night. Rated hard because of the fine barrier-island fingers along the coast; cut the smooth northern border first, then work the ragged eastern edge slowly with a detail saw, leaving the thinnest points for last.
North Dakota Pumpkin Stencil
North Dakota's silhouette appears as a wide, nearly rectangular shape with a gentle wave along its northern border and a stepped notch at the lower right, making it one of the simpler state outlines to carve as a pumpkin stencil. The entire interior is cut away as a single open shape, so the lit jack-o-lantern shows the unmistakable broad flatness of the Peace Garden State glowing from inside. Score along the straight southern edge first with a ruler-guided blade to keep the base line crisp before cutting the wavy northern border freehand.
North Dakota State Shape
North Dakota's near rectangle is opened up as one wide glowing panel, with the gently wavy Red River border on the east side breaking the straight lines. The full state interior is cut through and the rind around it stays put, so the shape shines bright at night. This is one of the easiest state maps to carve; keep your knife vertical so the long edges stay clean.
Ohio Pumpkin Stencil
Ohio's state outline fills this easy pumpkin stencil as a roughly tear-drop-shaped silhouette with a distinctive jutting peninsula on the upper right where the panhandle meets Lake Erie, curved western and southern borders, and a slightly ragged bottom edge tracing the Ohio River. The whole interior is pierced as a single open shape so the recognizable Buckeye State glows cleanly from inside the jack-o-lantern. Take extra care cutting the small jutting peninsula tip in the upper right, keeping your blade angled slightly inward to avoid nicking the point.
Ohio State Shape
Ohio's rounded river-border silhouette is cut out as a single glowing shape, with the wavy southern edge and squared northern corners removed clean through the wall. The surrounding pumpkin stays whole, so the map reads instantly from across the yard. Trace the bumpy Ohio River edge slowly with a fine saw; the rest of the outline is gentle curves and easy straightaways.
Oklahoma Pumpkin Stencil
Oklahoma's silhouette stretches wide in this state pumpkin stencil, showing the long panhandle arm extending to the left, a nearly rectangular main body, and the jagged stepped southern border that traces the Red River. The interior is cut as one open shape, making the panhandle the defining visual element that distinguishes Oklahoma from any other state design. Because the panhandle is long and narrow, cut it first while the surrounding pumpkin skin is still firm, using a thin blade and steady outward strokes to keep the arm from cracking.
Oklahoma State Shape
Oklahoma's distinctive silhouette, from the long skinny panhandle to the notched southern border, cut fully through so the entire state shines as a single lit shape. The interior is removed in one large piece while the rest of the pumpkin stays solid. Because the panhandle is a narrow strip, this medium design carves best if you cut that section last and support it with your free hand as you finish.
Olympic Rings Pumpkin Stencil
Five interlocking rings arranged in the classic Olympic formation fill this sports pumpkin stencil from edge to edge. Each ring is a thick circular band with its interior cut through, and the four points where adjacent rings overlap create small lens-shaped intersections that remain as solid bridges. The design is bold and widely spaced, with most of the glow coming from the large interiors of each ring. Cut the small lens-shaped overlap bridges last, never remove them, and carve each ring interior starting from the top-left ring and working right, so the connected structure stays rigid throughout.
One Tooth Jack-o-Lantern Pumpkin Stencil
This jack-o-lantern face pumpkin stencil keeps it deliberately minimal: two teardrop eye shapes each with a crescent notch cut from the bottom to suggest a raised brow, a small triangular nose, and a wide grinning mouth with one single center tooth left intact at the top lip. All four openings are pierced so they glow together, and the lone tooth bridging the smile is the only delicate detail in the whole design. Cut the single tooth gap on either side of that center tooth in two careful inward strokes, meeting cleanly at the base so it does not detach.
Oregon Pumpkin Stencil
Oregon's outline appears as a chunky roughly rectangular shape with a short notch in the upper-left corner where the Columbia River forms the Washington border, a gently curved coastal edge on the left, and a mostly straight southern border in this easy state pumpkin stencil. The entire interior is cut away as a single open shape so the Beaver State silhouette glows from within. The short upward notch at the upper-left corner is the most distinctive detail, so cut that notch carefully before tracing the longer straight edges so you do not accidentally round it off.
Oregon State Shape
Oregon's broad, boxy outline carved as one glowing window, with the Columbia River notch along the top and the gentle Pacific curve on the left. The full state shape is cut through so the candle lights it edge to edge, framed by solid rind. A friendly medium carve since most borders are long and straight; steady the blade through the northern river squiggle and the rest goes quickly.
Paw Print Pumpkin Stencil
A large paw print with one big central pad and four oval toe pads fills the face of this pumpkin stencil, each pad carved as a separate pierced cutout surrounded by solid orange wall. Lit from inside, the glowing ovals float against the dark background and read instantly as a cat or dog track. Cut the four smaller toe pads first while the central pad wall is still fully intact to keep the surrounding skin from flexing and cracking during the trickier large cut.
Peace Sign Pumpkin Stencil
A large peace sign fills the pumpkin face in this easy pumpkin stencil: a bold outer ring interrupted by four gaps, a vertical center bar, and two diagonal lower bars all pierced through, with the spaces between them staying solid. When lit, the candlelight glows through the ring segments and the three bar slots, mapping the familiar peace symbol in orange light. Because the ring has four gaps that nearly isolate four arc sections, cut the two lower arcs last to keep them braced while the upper cuts are made.
Pennsylvania Pumpkin Stencil
The outline of Pennsylvania fills this pumpkin stencil as a single large cut-out: the roughly rectangular shape with its notched southwestern corner and jagged northern border traces the Keystone State's recognizable silhouette. Because the entire interior is pierced through as one piece, the jack-o-lantern glows as a bold, dark window of light. Score the long straight bottom edge first to anchor your line before navigating the irregular border.
Pennsylvania State Shape
Pennsylvania's blocky silhouette stretches wide across the pumpkin, straight along the top and bottom with the jagged Delaware River border zigzagging down the eastern side. The whole state is a single pierced opening that glows as one solid panel. Take the ragged eastern edge slowly with a fine saw, backing the blade out at each angle change so the small points do not snap off.
Pi Symbol Pumpkin Stencil
A large, calligraphic pi symbol dominates this pumpkin stencil, with a long sweeping horizontal crossbar that curls upward at both ends and two tall descending legs that curve outward at the bottom. The single solid shape is cut entirely out of the pumpkin face as one connected piece, leaving a bold glowing symbol framed by solid orange. The long thin crossbar is the most vulnerable element: cut both legs first to release tension before slicing along the bar from each end toward the center.
Plain Cross with Nine Rays
A plain cross stands at the center while nine tapered rays of light fan outward around it, like a sunburst breaking through. This shaded design is carved on a continuous wall, shaving the skin away so the cross and rays glow warmly with no pierced openings, which suits a reverent, softer look. Shave the cross to an even depth first, then taper each ray shallower toward its tip so the light appears to fade outward.
Plain Fire Helmet Silhouette
A traditional firefighter helmet in bold silhouette, showing the raised front shield, domed crown, and long swooping rear brim that flares out to protect the neck. The entire helmet is cut through as one large opening, so it glows as a single unmistakable emblem. This easy tribute carve works great on a big pumpkin; cut the long brim curve in one slow continuous pass to keep its sweep smooth.
Plain Plus and Four Round Dots
A bold plus symbol sits at the center with four round dots anchoring the corners, a clean five-hole design that reads instantly from the street. The cross and dots are all cut straight through, with no fragile details anywhere on the pattern. A great pick for nurses, EMTs, and first-aid fans: use a ruler when transferring the design so the cross arms stay perfectly square.
Plus Above Four Windows
A bold medical plus sign glows at the top while a row of small square windows and a larger doorway below turn the pumpkin into a tiny lit-up hospital. Every shape cuts straight through, and the straight-edged squares make this an easy, tidy carve, perfect for healthcare workers or a first-responder porch display. Score each square with a ruler before cutting so the windows line up in a neat row.
Praying Mantis with Long Legs
A praying mantis poses in elegant line art, from its long antennae and triangular head down through folded forelegs and dramatically bent back legs. The design is etched, not pierced: every line is a shallow groove shaved through the skin so the insect glows as thin golden strokes. Hard-level patience pays off here; keep your groove width consistent along the spindly legs and antennae so no single line reads heavier than the rest.
Rainbow and Clouds Pumpkin Stencil
This pumpkin stencil features a rainbow of four concentric arcs rising above two puffy clouds, with scattered stars and small circles floating around the composition. The clouds and stars are separate pierced cutouts, and the arc bands are cut through with thin solid bridges between them, creating a whimsical scene that glows warmly from a candle or LED inside. Cut the small stars and round circles first while the wall is firm, then remove the cloud shapes, and finish with the long sweeping arc cuts so the composition stays supported throughout.
Rainbow Arch Pumpkin Stencil
Five concentric rainbow arcs are centered on this pumpkin stencil, each band separated by a narrow uncut strip so the finished jack-o-lantern glows with layers of orange between bands of dark. The arcs are wide and smoothly curved, making every cut a long gentle sweep with no tight corners. To keep all five bands from sagging after carving, work from the innermost arc outward so the outer wall stays thick and supportive while you remove each layer.
Reverse BOO Block Letters
The word BOO in fat block letters fills the front of the pumpkin, carved in reverse relief: the background panel is shaved away while the letters remain raised in untouched skin. No holes are pierced, so the pumpkin stays sturdy and reads clearly by daylight or candlelight. An easy etch for a first shading project; trace the letter outlines with shallow score cuts before peeling the background to an even depth.
Rhode Island Pumpkin Stencil
The outline of Rhode Island as it appears on a map is the sole design on this state pumpkin stencil: a narrow vertical silhouette with a straight eastern coast, an irregular western edge, and a distinctive notch in the lower right where Narragansett Bay indents the shoreline. The entire shape is one single pierce-through cutout so the state glows as a solid window of light. Trace the coastline outline slowly and continuously without lifting the blade so the curved bay notch at lower right stays smooth and does not crack at that concave point.
Rhode Island Stylized Shape
A tall, flowing take on Rhode Island glows as one large cut-through opening, with a sweeping curved western edge and a notched coastal bite carved into the bay side. The stylized silhouette keeps the state recognizable while smoothing the fussiest shoreline detail into bold shapes. Carve the big outer curve in long confident strokes, then slow down for the inward bay notch so its point stays sharp.
Round Eyes and Broad Crescent
Two big round eyes and one broad crescent smile make up this whole cheerful design, glowing warm amber against the shell. All three shapes are cut cleanly through with no teeth or interior details, so the face works on any pumpkin color, and it looks especially striking on a blue or white heirloom variety. As an easy carve, use a round cookie cutter or drill bit to keep the eyes perfectly circular, then saw the wide grin in two relaxed passes.
Round Fish and Three Bubbles
A plump fish silhouette with a notched triangle tail swims across the pumpkin, trailed by three round bubbles rising toward the stem. The fish body and each bubble cut completely through, giving anglers a bold, glowing catch with almost no fine detail to fuss over. An easy pattern; remove the large body in two pieces split at the tail notch, then drill or carve the bubbles smallest to largest.
S-Curve Snake
A thick snake winds through a bold S curve, its tapered head at the top and tail flicking out at the base, all carved as a single flowing opening. The whole serpent shape is cut through, so one continuous ribbon of light snakes across the pumpkin after dark. Because it is a single aperture with no fragile bridges, this easy design just needs slow steady knife work around the curves.
Saguaro with Desert Sun
A tall saguaro cactus with two upraised arms stands over a desert floor of scrub grass, scattered stones, and a distant ridge, with a round sun hanging in the sky. The whole southwestern scene is skin-shave shading: each element is peeled to pale flesh while the pumpkin wall stays sealed. At medium difficulty, peel the big cactus trunk in long vertical strokes to mimic its natural ribs, then add the small ground details last.
Sailboat With Pennant
A little ship glows on the pumpkin with two triangular sails split by a tall mast, a small pennant flying at the top, and a wide trapezoid hull below. Each sail, the flag, and the hull are separate cut-through openings, with skin bridges forming the mast and boom lines between them. This easy design suits young pirates and first-time carvers; cut the small pennant first while the wall is sturdy, then the sails, then the big hull last.
Seated Cat with Upright Tail
A seated cat in profile, ears pricked and long tail curling upward, cut entirely through so the whole silhouette becomes a window of warm light. The design has no interior details, which keeps it simple, but the slender curved tail asks for a little care. An easy carve overall; save the tail for last and support the wall with your free hand as you follow its curve so the tip stays intact.
Seated Rabbit with Split Ears
A seated rabbit in profile with two tall split ears, a rounded back, and tucked front paws, cut through as a nearly single silhouette with slim gaps defining the ears and feet. The shell around the bunny stays whole so the glowing shape reads crisply from a distance. Carve the narrow gap between the ears first; it is the finest cut on an otherwise smooth outline.
Seven Hearts in a Tall Zigzag
Seven hearts zigzag down the front in an alternating left-right column, with small round dots sprinkled between them for sparkle. Each heart and dot cuts fully through, and the vertical layout is made for tall, skinny pumpkins and gourds. A medium carve mostly for the layout; tape the stencil straight down the tallest face before transferring, and carve from the top heart downward so shavings fall clear of finished cuts.
Seven Stars in a Winding Trail
Seven five-pointed stars of varying sizes wind down the pumpkin in a gentle S-curve, like a constellation trailing across the night sky. Each star is a full cut-through opening, so the finished lantern twinkles from every angle. Star points are where beginners slip, so cut each arm from the outer tip inward toward the center and let the cuts meet, which keeps all five points sharp on every star.
Seven Unequal Honeycomb Cells
Seven hexagonal honeycomb cells of slightly different sizes cluster together, each one a glowing six-sided window separated by thick shared walls. Every cell is cut fully through, and those chunky connecting walls are what keep the pumpkin strong, so resist the urge to slim them down. Cut each hexagon side as its own straight stroke, finishing the corners cleanly with the knife tip, and start with the center cell to anchor the layout.