Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
803 results · Page 7 of 23
Four Toes and Unequal Paw Pad
A giant dog paw print glows from the pumpkin, four rounded toes arched over one big slightly uneven main pad. Each pad is a separate cut-through opening with plenty of rind between them, so nothing fragile is left behind. That spacing makes this an easy first carve for pet lovers; scoop each toe in a single smooth circuit and the edges will glow clean and bright.
Four Trailing Stars and Dots
Four five-pointed stars in descending sizes sweep diagonally across the pumpkin, joined by a few small round dots that read like distant sparkles. Each star and dot is cut fully through, so the cluster twinkles convincingly once a candle goes in. The star points are what make this a medium carve; drill a starter hole at the center of each star and always saw from the middle out toward each tip to keep the points sharp.
Four-Arch Rainbow
Four nested rainbow arches glow from the lower half of the pumpkin, each band separated by a strip of untouched shell. The arch openings are cut all the way through while the curved ribs between them stay in place to define the rainbow shape. Start with the smallest inner arch and work outward so the narrow ribs keep their support as long as possible.
Four-Toed Paw Above Broad Bone
A four-toed paw print floats above a big classic dog bone, a simple two-part salute to the family pup. Both shapes cut fully through: the four toe pads and rounded palm glow as separate openings, and the chunky bone shines below them. It is a forgiving beginner carve because every shape is wide and rounded; just space the toe pads carefully when transferring the pattern so the skinny walls between them stay intact.
Four-Tongue Flame
One big flame fills the face of the pumpkin, its four licking tongues tapering to sharp points just like the classic fire symbol. The entire flame is a single cut-through shape, so candlelight literally becomes the fire. This is an easy carve with only one piece to remove; poke the pattern deeply at each flame tip first, then saw from the rounded base upward so the narrow points come out clean instead of ragged.
Four-Wing Dragonfly
A graceful dragonfly spreads four broad wings from a segmented body that runs straight down the pumpkin, with two small antennae curling from its head. Nothing is pierced; instead you shave the skin inside each wing and body segment so the shapes read as pale etched panels against the orange rind. Use a loop tool and keep the shave shallow so the wing outlines stay crisp.
Frankenstein Pumpkin Stencil
This Frankenstein pumpkin stencil takes a bold, graphic approach: a wide flat-topped head with jagged spiked hair cut as a top border, a dense row of small stitch cuts across the forehead, thick angular brow and wide nose, a broad mouth showing individual teeth, and square neck-bolt tabs on both sides. The cut shapes are chunky and widely spaced, letting abundant light pour through the tooth row and eye slots when carved. Cut the tight stitch row across the forehead first, keeping each tiny rectangle separate, before opening the larger eye and mouth areas.
Friendly Alien Monster Pumpkin Stencil
A friendly alien monster pumpkin stencil showing a round-bodied creature with three bulging circular eyes, two small antenna balls on stalks, a wide grinning mouth with pointed fangs, and shaggy textured fur patches on its body and feet. One arm is raised in a wave while the other hangs loosely at its side. Carve the three eye circles early, since they are isolated islands that require intact pumpkin wall around them to stay in place.
Friendly Ghost Pumpkin Stencil
A cheerful, cartoonish ghost with a round pudgy body, wide grinning face with crinkled eyes and rosy cheeks, and wavy trailing edges floats center-stage in this ghost pumpkin stencil. The ghost's body is a network of flowing curved solid lines, the outline, the cheek arcs, the eye detail curls, set against cut-through areas that form the glow around the figure. Wispy curl accents appear on both sides. The crinkle details inside the eyes and the small cheek curves are the narrowest solid bridges; cut those first before removing any of the surrounding open areas.
Friendly Jack-o-Lantern Pumpkin Stencil
Two rounded horseshoe-arch eyes, each with a small bump notched from the bottom to suggest eyebrows, and a broad curved mouth split by two square bottom teeth define this easy pumpkin stencil. The asymmetry between the left eye (fuller arch) and the right eye (slightly smaller, offset notch) gives the face a winking or quizzical personality. All cut-outs are generous and smooth, making this a good pumpkin stencil for carvers who want a friendly face without tiny fiddly pieces. Leave the two small inner-eye notches for last so the arch stays rigid while you cut the mouth.
Funny Monster Pumpkin Stencil
A round-bodied cartoon monster with an oversized fuzzy head, two large circular eyes, a wide fanged grin, spiky hair tufts, stubby arms raised to the sides, skinny stick legs, and round feet fills this pumpkin stencil. The creature's oval eye circles and the spaces between the arms and body are cut through, while the chunky body silhouette stays as solid orange skin. Carve the two circular eye openings and the small round nose dot at the top before cutting the body perimeter, so you can brace the knife against solid material.
Furry Monster Pumpkin Stencil
A stocky, fuzzy monster with two curved C-shaped eyes, a wide toothed grin, shaggy fur texture all over its body, two stubby horns, and three-fingered clawed hands raised at its sides fills this hard pumpkin stencil. The fur shag is expressed as jagged fringe cuts around the silhouette's edge rather than interior cuts, keeping the figure stable. The thick C-eye shapes and the tooth row between the upper and lower jaw are the most structurally important bridges. Carve the fur fringe around the outer edge before opening the smile area so the lower body stays anchored.
Fuzzy Monster Pumpkin Stencil
A round, fuzzy cartoon monster with stubby arms and legs dominates this hard pumpkin stencil, set inside a large circular frame with small scattered cut-outs suggesting a speckled texture. The creature has crescent-shaped eyes, a wide open mouth rimmed with ragged teeth, and a tongue poking out, while splatter-like shapes burst from the sides. The monster's body is largely solid orange with the negative space around it carved out, so light escapes the outer circle and the scattered texture dots, keeping the face readable. Cut the circular outer border and the scatter dots before tackling the detailed mouth.
Game Over Pumpkin Stencil
"GAME OVER" fills this easy pumpkin stencil in two stacked rows of chunky 8-bit pixel font lettering, each character built from squared-off rectangular blocks with notched corners that read unmistakably as retro video game text. Every letter interior is cut through, and the negative space between characters is narrow but distinct. The squared notches at the corners of each letter are the trickiest spots to keep clean; use the tip of a narrow blade to score those inside corners before opening the main letter body.
Garden Bench Paw Print
One oversized paw print sits front and center: a broad pad below four oval toes. Nothing is pierced through; you shave away just the skin inside each shape so the pale flesh shows in a soft, even glow. Since this is an easy shading design, use a loop tool or spoon edge and keep your scraping depth consistent so every toe lights up the same.
Garden Gnome Pumpkin Stencil
A garden gnome with a tall floppy pointed hat, round rosy cheeks, and a tiny curved smile stands front-facing in this easy pumpkin stencil. The hat brim curls at its tip, the face is framed by a bushy beard rendered as rounded overlapping lobes, and small feet peek out at the base. Cut-through openings define the hat interior, the beard lobes, and the body, while the face circle, hat brim, and outer silhouette stay solid. The small smile curve and cheek details are the most delicate pieces, cut them before opening the large beard sections below.
Garden Snail & Grass
A smiling garden snail glides between tufts of grass, its spiral shell coiling into a bold center swirl. The design is pure surface work; you shave the skin from the body, shell, and grass blades so they glow pale against the dark rind, with the spiral line left raised for definition. Shave the big shell arc in one smooth pass, then use a fine gouge for the antennae and grass so they stay thin.
Gear Cross and Three Dots
A chunky steampunk gear glowing around a solid crossbar, with three round rivet dots floating beside it like escaping sparks. The spaces between the gear teeth and the four windows inside the cog are cut through, while the cross-shaped bar stays attached to the pumpkin wall and holds everything together. Carve the small dots first, then the gear windows, and keep the crossbar at least a finger wide so the design stays rigid.
Gecko with Thirteen Toe Tips
A gecko sprawls diagonally across the pumpkin as one bold silhouette, splayed toes gripping and its thick tail curving away. The entire lizard is a single cut-through aperture, so the whole body glows as one connected shape with those distinctive rounded toe pads catching the light. At medium difficulty, the toes are the trick: cut each tiny pad by connecting it to its leg with a short channel, and remove the big body piece last.
Geometric Butterfly Pumpkin Stencil
A geometric butterfly pumpkin stencil showing a symmetrical butterfly with four wings divided into bold sections: two large upper wings each containing a full circle and a pointed outer blade shape, and two lower wings each with a scalloped half-circle cutout. A slim segmented body runs down the center axis with small antennae at the top. The large wing sections and the lower scalloped openings glow brightly when lit, while the solid center body and the wing-division lines keep the butterfly shape crisp. Cut the two round upper wing circles first, since they are isolated islands that must be scored from the surrounding wing before anything else is removed.
Georgia Pumpkin Stencil
The outline silhouette of the state of Georgia fills this easy pumpkin stencil as a single solid cut-through shape, with its distinctive roughly rectangular form, slightly notched upper-left corner, and irregular eastern and southern coastline edges. When carved, the entire state shape is removed as one piece, leaving a glowing Georgia silhouette in the jack-o-lantern. Score the outer border slowly and follow the subtle coastal indentations closely on the right side to keep the shape recognizable, especially the small southeastern projection at the bottom.
Georgia State Shape
The full outline of Georgia is removed as one big opening, from the straight western border to the jagged Atlantic coastline in the southeast. Everything inside the state shape gets cut away while the pumpkin wall around it stays intact, giving you a bright glowing map. Trace the bumpy river border on the west side carefully; the rest is long smooth strokes suited to a medium skill level.
Ghost Emoji Pumpkin Stencil
The ghost emoji comes to life in this beginner pumpkin stencil: a wide-eyed ghost body with one large circular eye and one smaller dot eye, a gap-toothed open mouth with a dangling tongue, two draping arms with pointed tips on each side, and a looping curved tail below. A raised brow arc sits above the eyes. The ghost body outline remains solid while the eyes, brow, mouth, tongue, and tail gaps are cut through. Cut the small eye dot and brow arc first, then the tooth gaps in the mouth before opening the larger arm-side cutouts.
Ghost Mask Pumpkin Stencil
A ghost-faced horror-movie mask is the subject of this easy pumpkin stencil: an elongated oval skull shape with two large teardrop eye cutouts, a small oval nose hole, and a wide gaping mouth that tapers to a pointed chin. Flowing tendrils extend from the lower sides of the mask. The three facial openings glow as three distinct shapes, and the flowing lower extensions give the mask a draping, spectral quality when lit. Cut the narrow nose piece first since it sits between the two large eye openings and is the most vulnerable to tearing.
Ghost with BOO Balloon Pumpkin Stencil
A small ghost holds a round balloon with the word BOO written on it in this hard ghost pumpkin stencil, the balloon rendered as a thin open circle with letter cutouts and the ghost below it as a rounded blob with oval eyes and a wavy hemline. Both figures are outlined by thin curved lines that remain solid orange, so when lit the design shows glowing ribbons of light tracing the balloon string, the ghost body, and the BOO lettering. The string connecting the balloon to the ghost's hand is a single narrow line that must be cut last to keep the two halves of the stencil from shifting apart mid-carve.
Ghost with Three Uneven Points
A single billowy ghost with two raised arms and a wavy hem ending in three uneven points, carved as one big glowing cutout. The entire ghost silhouette is pierced through, so candlelight fills the friendly specter from arms to tail. This easy one-piece design suits squat pumpkins with plenty of front surface; cut the smooth outer curves first and finish with the scalloped bottom points, which are the only fiddly bits.
Giant Nose and One Tooth
A big-hearted face dominated by an oversized triangle nose, flanked by two small round eyes, with a wide crescent smile carrying one square tooth. Every feature is cut through, and the giant nose becomes the brightest window on the whole pumpkin once the candle goes in. An easy pattern with generous shapes; cut the huge nose last so the wall keeps its strength while you work.
Giant Panda Pumpkin Stencil
A giant panda sits upright in this easy pumpkin stencil, its chunky arms raised wide, rounded ears perched on top, and oval eye patches, a small nose, and a belly spot forming the face and body markings. The large body shape, the eye patches, and the surrounding negative space are cut through in layers, while the connecting bridges between ears and head and between arms and body stay solid. Carve the smaller eye patch ovals before the large outer body cut to avoid the face area shifting while you work the perimeter.
Giraffe Pumpkin Stencil
A giraffe's elongated head and neck fill this pumpkin stencil from top to bottom, its distinctive coat pattern recreated as dozens of organic blob-shaped spots scattered across the neck and face. Each spot is a separate pierced-through opening, so when lit the jack-o-lantern glows with a constellation of irregular patches that read unmistakably as giraffe markings. Because many spots sit close together, cut the smallest spots near the top of the head first and work downward toward the larger neck patches, so the thin walls between neighboring openings stay supported longest.
Glowing Dog Paw Print Pumpkin Stencil
A large dog paw print with one big main pad and four oval toe pads arranged above it fills this easy dog pumpkin stencil, all five shapes carved as separate open pieces that glow independently when lit. The pumpkin-skin gaps between the toe pads and the main pad are narrow but uniform, creating a clean, recognizable print. Cut the four toe pads first from top to bottom, then remove the large main pad last, since it is the biggest single cut and easier to control once the smaller surrounding shapes are already out.
Golden Retriever Pumpkin Stencil
A golden retriever's face looks straight out from this easy pumpkin stencil: wide floppy ears, a broad forehead, round eyes with small arched brows above them, a large nose, and a happy open mouth with tongue showing are all carved as pierce-throughs. The ears are the largest cut areas and frame the face with an even glow. When the pumpkin is lit, the dog's expression reads as warm and friendly. Carve the small eyebrow arches before removing the large ear sections, since the brows are thin and easy to lose once the nearby wall flexes.
Goldfish Pumpkin Stencil
A plump goldfish shown in profile swims to the right: a rounded body, a large flowing tail fin swept back dramatically, a smaller dorsal fin on top, and a single pectoral fin near the belly. A small negative-space teardrop inside the body suggests the gill line. The whole fish is a single connected cut-out, so the lit pumpkin casts one glowing fish silhouette against the dark wall. Keep the narrow pectoral fin intact as long as possible and cut it free only after the main body is removed.
Goldfish with Flowing Fins
A fancy fantail goldfish glides across the pumpkin with billowing fins, a sweeping double tail, and a body covered in overlapping scale rows. This is a continuous-wall shading design: the skin is shaved away at varying depths so fins glow softly and each scale reads in relief, with no pierced holes. Rated hard for its texture work, it goes best if you outline the fish first, clear the background layer, then carve the scales one row at a time.
Goofy Buck-Toothed Smile
A cheerful jack-o'-lantern face built from two tall arched crescent eyes and a huge open grin anchored by a pair of oversized buck teeth. Every shape is cut all the way through, so the eyes and smile glow brightly while the goofy overbite stays as solid pumpkin. This is an easy first carve; saw slowly around each tooth from the mouth opening inward so the narrow tooth tabs never snap.
Goofy Pupils and Twelve Dots
A freckle-faced goofball with lifted eyebrow cuts, big eyes crossed by full-width pupil tabs, a round nose, twelve freckle dots, and a huge open grin with mismatched teeth. The openings are cut through while the pupil bars, teeth, and surrounding freckle rind stay intact. It rates hard because those wide pupil tabs span the entire eye: cut each eye as separate top and bottom windows, drill the freckles with a small round bit, and save the eyebrows for last.
Goofy Three-Tooth Grin
A lovable goofy face with two big round eyes, a small triangle nose, and a wide smile broken up by three blocky teeth. Every shape is a full cut-through opening, so the eyes, nose, and mouth glow while the rest of the pumpkin stays untouched. It is a great first stencil; start with the smallest tooth cuts before opening the large mouth so the wall stays sturdy.