Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
302 results · Page 7 of 9
Seven-Rib Shell and Three Dots
A fan-shaped scallop shell spreads seven glowing ribs from a hinged base, crowned by three small round dots floating above like sea spray. Each rib is its own cut-through opening separated by strips of intact wall, so the shell keeps its elegant ridged look when lit. Cut the center rib first and work outward symmetrically, keeping the dividing strips at least a finger-width so the fan stays strong.
Shell Fan With Two Dots
Five elongated petal-shaped openings fan out from a point near the base, forming a glowing scallop shell topped by two small round dots below. Each opening is fully pierced, and the ribs of shell left between them create the fan effect. Keep those dividing ribs at least half an inch wide as you cut so the fan holds its structure, working from the center petal outward.
Simple Crescent & Star
A slim crescent moon curves beside a small five-pointed star, both cut fully through so the pair glows like a night sky against the pumpkin. There are only two openings, which keeps the carve quick and tidy. The tapered tips of the crescent are the trickiest cuts, so work from the widest part of the moon toward each point and let the tips meet cleanly rather than forcing the blade.
Simple Daisy Flower
A cheerful five-petal daisy with a round center, sized to fill the front of a medium pumpkin. Nothing is pierced through: you shave the skin off each petal and the center circle so they glow softly while the outlines stay as untouched rind. Because this is an easy shading design, scrape each petal to an even depth of about half the wall thickness so all five light up with the same warm tone.
Simple Glowing Cross
A tall Christian cross glows from the center of the pumpkin, with slightly tapered arms that give the shape a hand-hewn, rustic feel. The entire cross is cut through, so candlelight pours out in one bold symbol while the rest of the shell stays untouched. Since this is an easy single-opening design, take the vertical beam in two long, steady strokes and the crossbar last to keep every edge crisp.
Single Crescent Moon
A single oversized crescent moon curves up the side of the pumpkin, cut clean through so it glows like a slice of night sky. The whole design is one smooth opening with no interior details, which makes it a relaxing carve for any skill level. Cut the outer curve first, then the inner curve, and pop the crescent out in one piece for the cleanest edges.
Single-Eye Crescent Smile
One big round eye sits above a long crescent smile, giving this jack-o'-lantern a goofy cyclops charm with just two cuts. Both shapes are pierced fully through, and the wide openings make it a forgiving first carve for beginners. Trace the circle in short strokes so it stays round, then cut the smile from the center outward so both tapered corners of the grin match.
Six Petals and Six Dots
A six-petal flower blooms at the center, each teardrop petal cut fully through around a solid rind disc that forms the flower's middle. Six small round holes circle the bloom like scattered seeds, letting extra pinpoints of light through. Designed to shine on a bottle gourd or pumpkin as a garden lantern; a medium carve where the main care point is keeping the petal tips from tearing into the neighboring holes.
Six Waves Sun and Starfish
A half-sun sets over two rows of curling surf, six stylized waves in all, with a chunky starfish tucked at the end of the bottom row. Each wave curl, the sun, and the starfish are individual cut-through openings separated by healthy strips of skin. For a medium carve like this, work top row first and keep the skin bridges between waves at least finger-width so the pattern stays strong through the whole session.
Six-Point Star with Round Tips
A six-point sheriff-style badge star with rounded ball tips glows proudly from the pumpkin in this tribute to law enforcement. The full star is removed as one big cutout, so the badge shines as a single bold panel of light. It is an easy carve despite the fancy silhouette; saw each point from its ball tip back toward the star body, and rotate the pumpkin as you go so every cut is at a comfortable angle.
Six-Point Starburst
A bold six-pointed starburst fills the front of the pumpkin, with slim rays shooting out from a hexagonal core. The entire star is a single pierced opening, so the light pours through the center and tapers into each sharp point. Use slow, shallow saw strokes as you approach the ray tips, since those narrow points are the easiest spots to overcut.
Slant Brows and Triangle Eyes
Pure menace in four cuts: two big triangle eyes slanted inward in a hard glare, each topped by a thin detached brow slit angled the same way. All four shapes are cut through, and with no mouth at all the silent stare does the work. This is one of the easiest designs to carve and one of the most effective; keep the brow slits narrow and parallel to the eye tops so the angry angle stays sharp.
Small Round-Eyed Surprise
The most minimalist face possible: two small round eyes and a single oval mouth, placed low on a tall pumpkin so the blank rind above becomes part of the joke. Just three quick cut-through holes and the carve is done, which makes this a genuine five-minute project. Keep the openings small and evenly spaced; on such a spare design, clean placement is what sells the look.
Smiley Face Pumpkin Stencil
A classic smiley face fills this easy pumpkin stencil: a broken circle made of twelve short arc segments forms the head outline, two tall oval eyes sit in the upper face, and a wide curved smile with rounded upturn ends completes the expression, all cut through as open negative space. The twelve dash segments that form the outer circle are separated by small uncut gaps, creating a dotted-ring effect when lit. Carve the outer arc segments first to define the circle, then cut the eyes and smile; the uncut gaps between segments are intentional and should be left untouched.
Snowcap Peaks and Moon
A wide arched window is carved through the pumpkin with three mountain peaks left standing in dark silhouette, while a full moon glows from a separate round opening above. The sky area around the peaks gets cut away and small snowcap notches pierce the summits, so light outlines the whole range. Keep the peak silhouettes attached at the base as you saw the sky sections, since they anchor the entire scene.
Sombrero Pumpkin Stencil
A wide-brimmed sombrero fills this pumpkin stencil, its high rounded crown pierced as one large cutout and the broad brim divided by a decorative band of repeating V-shaped notches that form a row of open triangles along the lower edge. The hat brim is the negative-space opening, and the triangular notches add festive detail within it. Cut the triangular notches along the band first, from the center outward in each direction, so the thin pumpkin teeth between them remain stable while you remove the larger crown and brim sections.
South Carolina Heart Lettering
State pride spelled out plainly: a bold serif I, a big glowing heart, and the letters SC stacked in two rows across the pumpkin face. Each letter and the heart cut fully through, and the thick strokes make this an easy lettering carve with no fragile pieces. Cut the heart's top notch first to set its shape, then saw each letter stroke in straight runs, squaring the serifs from inside the openings.
South Carolina Pumpkin Stencil
The irregular outline of South Carolina, with its distinctive concave upper coastline notch and the jagged Sea Islands fringe along the lower right shore, is carved as a single pierced shape in this state pumpkin stencil. The entire interior is cut away, leaving only the border outline as the light-emitting shape. The lower coastal edge has the most complex jagged detailing, so cut that stretch last after the smoother inland borders are done, allowing maximum wall stability while navigating the short irregular coastal cuts.
South Carolina State Shape
South Carolina's distinctive triangle-like outline carved as one large glowing cutout, with the ragged coastal edge along the bottom right. The whole state shape is removed so light floods through it, while the rest of the pumpkin stays solid. The wavy coastline detail is where most of the work lives; use short sawing strokes and keep the blade upright so the little inlets stay defined instead of tearing.
South Dakota Pumpkin Stencil
South Dakota's near-rectangular outline, with its straight top and left borders and a stepped notch along the upper right where the Missouri River forms the border, plus a small jagged peninsula at the lower right, makes up this clean state pumpkin stencil. Almost all the edges are straight or gently curved, making this one of the more approachable state silhouette carves. Score and cut the straight left and top borders first since they set your orientation, then work around the subtle river-step notch and the irregular lower-right point last.
South Dakota State Shape
The full silhouette of South Dakota is cut through the pumpkin wall, glowing as one clean rectangular shape with the Missouri River notch tracing its jagged southeastern corner. Everything inside the border is removed, so the state reads instantly from across the yard. The medium rating comes from those small river-line zigzags; cut the long straight edges first, then slow down and nibble the notched corner in short strokes.
Spider Silhouette Pumpkin Stencil
A bold overhead-view spider silhouette with eight long tapering legs and a rounded abdomen below a smaller cephalothorax forms this easy spider pumpkin stencil, the entire body pierced through as one large connected cutout. The legs splay outward symmetrically, spanning nearly the full width of the design. Because the whole shape is one continuous cut, the chief challenge is the narrow neck pinch between the two body sections; cut that junction slowly with a fine blade to keep both halves from separating before you are done.
Spotted Eagle Ray
A spotted eagle ray glides diagonally across the pumpkin, its wide wings dotted with rows of round spots, a long whip tail trailing off behind, and a curled loop near the tail base. The whole creature is rendered by etching the skin: outlines and spots are shaved to glow softly while the wall stays sealed. Rated hard for the fine linework; carve the spots with a small round gouge and keep your outline strokes shallow and consistent.
Star & Four Dots
One big five-pointed star sits at the center of the pumpkin, ringed by four round polka-dot holes above, below, and to each side. Every shape is cut fully through, turning the pumpkin into a cheerful lantern that throws star and dot patterns onto nearby walls. This easy design is a great first carve; drill or scoop the four circles first, then saw the star point to point so the tips stay sharp.
Star Above Two Chevrons
A six-point badge star shines above two stacked chevron stripes, with three small dots arcing over the top like a crest. Every shape is cut fully through the wall, giving the design the crisp look of a service badge or rank insignia glowing on the porch. Cut the chevrons from their outer ends toward the center points, and keep the rind strip between the two stripes intact for a clean military edge.
Star of David Pumpkin Stencil
Two overlapping equilateral triangles forming the Star of David fill this pumpkin stencil as a clean geometric shape. The entire six-pointed star outline is carved as a single continuous pierce-through, and the small hexagonal gaps at each interlocking corner are left as solid pumpkin wall, creating the interlaced look of the design. On the lit jack-o-lantern the star glows in bright outline form. Score the six triangle tip points lightly before making full cuts; the acute corners are the most likely to tear, so finish them with a fine blade rather than a heavy saw.
Star with Four Curved Trails
A five-pointed star streaks diagonally across the pumpkin with four curved trails tapering away behind it, like a comet caught mid-flight. The star and each sweeping trail are cut fully through, with strips of rind left between the trails to keep the motion lines distinct. On this medium carve, the tapering trail tips are the tricky spots: cut each trail from its wide end toward the point and stop just short, finishing the tip with a single small stab cut.
Sun With Eight Rays
A bold sun built from a glowing circular ring surrounded by eight fat triangle rays, evenly spaced like a compass. Every ray and the ring band are cut fully through, so the whole emblem blazes with candlelight while the center disc and surrounding skin stay dark. This easy design suits first-time carvers; cut the ring in short arc sections rather than one continuous pass to keep the circle round.
Tall Eyes and Deep Crescent
A tall, friendly face made of just three shapes: two upright oval eyes and one deep crescent smile sweeping nearly the full width of the pumpkin. All three openings are pierced through, and the design especially suits oblong or elongated pumpkins. It is an easy carve with big forgiving shapes; cut the wide smile in two halves that meet at the center bottom so the long curve stays smooth and the flap comes out in manageable pieces.
Tall Narrow Oval Surprise
A surprised, ghost-like expression designed for very tall, skinny pumpkins: two long oval eyes stacked high, with a bigger gaping oval mouth below. All three ovals are pierced through, and the stretched proportions make the face look like it is mid gasp. This easy design works best when the ovals stay vertical and parallel, so lightly trace all three before cutting and check the alignment from a step back before you commit the knife.
Tall Oval Eyes and Small Smile
Two tall oval eyes and a small curved smile make up this cheerful minimalist face. All three shapes are cut fully through the wall, so the design carves in minutes and beams warm light from every opening. It is an ideal first pumpkin for young carvers with supervision; drill or poke a starter hole inside each eye so the saw can enter without stressing the surrounding rind.
Tall Oval Surprise Face
Two tall oval eyes hover above one big oval mouth, giving a tall pumpkin a startled, ghostlike gasp that reads perfectly from the street. All three shapes are pierced through, and with no corners or fine details it is about as beginner-friendly as carving gets. Rotate the pumpkin instead of your wrist as you saw each oval so the curves stay smooth and symmetrical.
Tall Star and Three Dots
One big five-pointed star dominates the pumpkin with three small round dots arcing beneath it, like a shooting star leaving a trail. Both the star and the dots are straightforward cut-through openings, making this a perfect first stencil for young helpers with an adult on the knife. Drill or poke the three dots first as warmups, then saw the star point to point, backing out at each corner.
Tall Toes Above a Low Paw Pad
A big glowing paw print built from four oval toe pads arranged above one broad heart-shaped main pad. All five shapes cut cleanly through the wall, and the generous spacing between pads makes the layout very forgiving. Drill a starter hole in the center of each pad and saw outward to the line; the smooth convex curves are ideal practice strokes for young or first-time carvers.
Tennessee Pumpkin Stencil
Tennessee's wide, almost rectangular state outline is cut as a single open silhouette in this pumpkin stencil, with the stepped notch on the upper-left edge and the jagged western corner representing the state's distinctive border. When lit, the entire shape glows as one bold window of light. Because the outline follows an irregular path with several sharp interior corners along the southern border, score each angle carefully and complete one full corner before moving to the next to avoid cracking the skin at the tight turns.
Tennessee State Shape
Tennessee's long parallelogram runs nearly the full width of the pumpkin, flat across the top with the jagged mountain border stepping down the eastern end. The entire state is removed as one wide glowing band. Since the opening is long and shallow, cut the straight top and bottom edges first, then work the stepped eastern corner in small bites to keep every notch sharp.