25 Awesome Pumpkin Designs

25 printable awesome pumpkin designs — ready to download, trace, and light up the porch.

1. Twenty-Two Ray Smiling Sun
A beaming sunburst face with closed happy crescent eyes, a small triangle nose, and a huge picket-tooth grin, all encircled by a radiating ring of alternating teardrop and triangle ray cutouts. Every ray, tooth gap, and feature pierces through, and the sheer count of small openings makes it an expert carve. Cut the outer rays in sequence around the circle first, rotating the pumpkin as you go, before opening the large mouth.
See template →
2. Natural Bat with Spread Wings
A lifelike bat spreads its wings across the entire pumpkin, with big upright ears, a furry textured body, and scalloped wing membranes ribbed by long finger bones. Nothing is cut through; the whole animal is sculpted in relief by shaving the background away and layering shallow cuts for fur and wing veins. This expert design is a true sculpting project, so work with gouges and a paring knife, establish the outline first, and build the fur texture with hundreds of short flicking strokes.
See template →
3. Leaping Gymnast with Stars
A gymnast soars in a full split leap, one arm reaching skyward toward a trail of stars and a curved comet streak behind her. The whole figure is a shaded carve on a continuous wall, shaving the skin so the silhouette glows without any pierced holes, which preserves the slender arms and pointed toes. Shave the thin limbs in light passes with a small loop tool, since going too deep on those narrow lines risks breaking through.
See template →
4. Domed Jellyfish and Bubbles
A ribbed jellyfish bell hovers near the top of the pumpkin, trailing eight long wavy tentacles that flow all the way to the base, with small bubbles rising on either side. The bell segments and tentacles are shaved to glowing flesh while thin strips of dark skin separate every ribbon, and the bubbles are pierced through. This expert shading design demands a steady hand; work each tentacle top to bottom in one continuous peel so the curves stay smooth and evenly lit.
See template →
5. Tree Pose with Raised Arms
A serene figure balances in yoga tree pose, arms raised overhead and one foot tucked against the standing leg, flanked by leafy sprigs on a shaved ground line. The design is entirely skin-shave shading with no pierced holes, so the figure glows in pale relief against the dark rind. Shave the torso and legs in long continuous strokes for smooth lines, then detail the thin arms and leaves with a fine gouge.
See template →
6. Woodland Toadstool Relief
An enchanted cluster of spotted toadstools carved in deep relief: one grand mushroom with a striped, gilled underside towers over smaller caps, ribbed stems, and leafy ground cover below. There are no pierced holes; the whole scene is sculpted by shaving the wall to different depths so light glows warmest under the big cap. This expert design rewards planning, so rough out the major cap shapes first and save the fine gill lines and spots for last.
See template →
7. Sleeping Moon and Star Scrolls
A serene sleeping crescent moon with a sculpted profile face rests beside a bold five-point star, the pair wrapped in curling scrollwork flourishes and tiny accent stars. Everything is continuous-wall relief, shaved to different depths with no pierced holes, giving it an heirloom carved-wood look. An expert project; keep the moon's facial features shallow and rounded, saving your deepest cuts for the background around the scrolls.
See template →
8. Galaxy with Three Planets
A sweeping spiral galaxy wraps across the entire pumpkin face, its curved arms shaved in graduated depths so the core glows brightest, while three ringed planets and scattered stars orbit the edges in raised relief. Nothing is pierced; every effect comes from continuous-wall shading at different thicknesses. Expert-level patience pays off here: establish the spiral arms as broad shallow bands first, then deepen toward the center in passes to build the luminous gradient.
See template →
9. Spiral Galaxy and Four Stars
A sweeping spiral galaxy with two luminous arms curling around a bright core, surrounded by four-point stars and a scatter of small stardust dots. The entire scene is skin-shave work with no pierced holes: the arms are shaved wide and shallow while the dots and stars are picked out individually. An expert pattern because of its long tapering curves; keep your gouge moving in smooth continuous strokes along each arm.
See template →
10. Crescent over Wooded Hills
A dreamy night landscape wraps the pumpkin: a large crescent moon and a sky full of four-point stars shine above rolling wooded hills dotted with pine trees. The whole scene is skin-shave shading with no pierced holes, so moon, stars, ridgelines, and trees glow at different intensities depending on how deep you scrape. As an expert design, map your depths first: carve the moon deepest for the brightest glow, the hills shallowest for a soft dusk.
See template →
11. Layered Compass Star Relief
A layered compass-rose mandala: an eight-point star nests inside a larger star, all wrapped in a ring of carved circles and framed by a shaved border medallion. The entire design is relief work at several depths with no pierced openings, which is why it rates expert. Establish the shallowest background layer first, then step each inner layer progressively deeper so the star points read as crisp raised facets.
See template →
12. Baseball and Crossed Bats
A trophy-worthy relief of a baseball resting over two crossed bats, all standing out from a recessed panel in true sculpted depth. The ball's curved stitch lines and the bats' grain and knobs are incised details, and nothing pierces the wall. Excavate the background panel to an even depth before rounding the ball, and undercut the bat edges slightly so they cast real shadows in daylight.
See template →
13. Five-Petal Flower and Scrolls
An expert-level layered blossom: five broad veined petals fan around a raised dotted center, wrapped in overlapping leaves and curling scrolls that spill toward the pumpkin's edges. It is entirely surface work, shaving the skin at many depths with nothing cut through, so it looks striking even in daylight on a fall porch. Sharpen your gouges and work from the deepest petals outward, layer by layer.
See template →
14. Fire Helmet Above Three Flames
A classic firefighter helmet, complete with front shield and wide brim, glows above three dancing flames in this tribute design. The helmet crown, brim, and each flame are separate cut-through openings, with skin bridges keeping the helmet's shield outline dark against the light. At medium difficulty, the flame tips are the fussy part; saw each flame from its wide base up toward the point, and cut the helmet's thin brim opening last when you can support the wall from inside.
See template →
15. Wide-Eyed Owl on a Branch
A magnificent wide-eyed owl perched on a curving branch, rendered in layered relief: feathered brow tufts, a sharp beak, ringed eyes, overlapping wing feathers, and a scalloped breast. Nothing is pierced; the entire portrait is carved by shaving the skin to varying depths so backlight grades from bright to dim across the feathers. This is expert work, so sharpen your loop tools, carve the deepest layers around the eyes first, and build the feather texture in shallow passes.
See template →
16. Jellyfish with Fifteen Bubbles
A dramatic jellyfish drifts down the tall face of the pumpkin, its ribbed bell crowning a tangle of long ribbon tentacles surrounded by fifteen bubbles of varying size. Everything is shaved relief with no pierced holes, and the overlapping tentacles at different depths are what make it an expert etch. Vary your shaving depth deliberately, deepest where tentacles cross behind others, to build the layered, flowing effect.
See template →
17. Plain Fire Helmet Silhouette
A traditional firefighter helmet in bold silhouette, showing the raised front shield, domed crown, and long swooping rear brim that flares out to protect the neck. The entire helmet is cut through as one large opening, so it glows as a single unmistakable emblem. This easy tribute carve works great on a big pumpkin; cut the long brim curve in one slow continuous pass to keep its sweep smooth.
See template →
18. Seahorse with Ten Raw Plates
An elegant seahorse curls down the pumpkin in profile, its coronet, snout, banded belly plates, back fin, and spiral tail all rendered in carved relief. This is a shading design: the body is shaved to a pale glow while the plate lines and outline are left or scraped at different depths for dimension, with no pierced openings. Rated hard for its fine segmentation, shave the belly bands one at a time and keep each dividing ridge intact.
See template →
19. Nine Triangles and Six Dots
Nine triangles in alternating sizes form a tidy three-by-three grid, with six small round dots tucked into the gaps between rows. Each triangle and dot is cut straight through, producing a clean modern lantern that glows like patterned tilework. This medium design is all about alignment, so tape the template securely, transfer every corner point before cutting, and carve the triangles row by row to keep the grid looking sharp and even.
See template →
20. Six Waves Sun and Starfish
A half-sun sets over two rows of curling surf, six stylized waves in all, with a chunky starfish tucked at the end of the bottom row. Each wave curl, the sun, and the starfish are individual cut-through openings separated by healthy strips of skin. For a medium carve like this, work top row first and keep the skin bridges between waves at least finger-width so the pattern stays strong through the whole session.
See template →
21. Five Curves Around a Dark Sun
Five curved galaxy arms swirl around a solid dark core, each tapered blade cut fully through so the design spins like a glowing cosmic pinwheel, with five small round star holes drilled between the arms. The center circle stays as untouched shell, anchored by the skin between the arms. At medium difficulty, the keys are the tapered arm tips; saw from the wide end of each arm toward its point, and drill the star holes before cutting the arms nearby.
See template →
22. Star with Four Curved Trails
A five-pointed star streaks diagonally across the pumpkin with four curved trails tapering away behind it, like a comet caught mid-flight. The star and each sweeping trail are cut fully through, with strips of rind left between the trails to keep the motion lines distinct. On this medium carve, the tapering trail tips are the tricky spots: cut each trail from its wide end toward the point and stop just short, finishing the tip with a single small stab cut.
See template →
23. Five-Petal Flower with Curls
A five-petal magnolia bloom with a dotted center opens across the pumpkin, framed by curling vine scrolls and shaded leaves. Everything is skin-shave work at layered depths: the petals glow brightest, the leaves and curls sit dimmer, and no part of the wall is pierced. Shave each petal from the center outward with a loop tool to build that soft gradient from bright to dark.
See template →
24. Lightning Bolt and Two Stars
A big lightning bolt zigzags down the center of the pumpkin, surrounded by two five-point stars and a scatter of round dots. Every shape is cut clean through, so the bolt blazes with candlelight while the stars and dots sparkle around it. The bolt is one straightforward opening with sharp interior angles; make a small relief cut at each zigzag corner so the blade can pivot without cracking the rind.
See template →
25. Snowcap Peaks and Moon
A wide arched window is carved through the pumpkin with three mountain peaks left standing in dark silhouette, while a full moon glows from a separate round opening above. The sky area around the peaks gets cut away and small snowcap notches pierce the summits, so light outlines the whole range. Keep the peak silhouettes attached at the base as you saw the sky sections, since they anchor the entire scene.
See template →