Similar to This
View all stencils →About this stencil
A lifelike bat spreads its wings across the entire pumpkin, with big upright ears, a furry textured body, and scalloped wing membranes ribbed by long finger bones. Nothing is cut through; the whole animal is sculpted in relief by shaving the background away and layering shallow cuts for fur and wing veins. This expert design is a true sculpting project, so work with gouges and a paring knife, establish the outline first, and build the fur texture with hundreds of short flicking strokes. This design is rated Expert / Pro and takes most carvers around 240 minutes from trace to glow. Sculpting-grade work. Three or more depth layers, fine detail.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a expert / pro carve like this you'll want a full ribbon tool set, clay sculpting loops, x-acto knife, and dremel (optional). Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
AdvancedBat with Scalloped Wings
A bat spreads huge scalloped wings across the whole front of the pumpkin, its furry body, tall ears, and wing finger-bones modeled in carved relief shading. Skin is shaved away inside the wing membranes while the ribs, body, and outline are left raised, and nothing is pierced. Shave the membrane panels evenly and keep the wing bones proud for a dramatic sculpted look.
AdvancedCrescent Moon & Small Bat
A small bat with scalloped wings glides across a big crescent moon in a classic Halloween night scene. Both shapes are shaved rather than pierced: the moon is peeled into a bright smooth crescent, the bat's wings are etched at a lighter depth, and its body stays as raised rind. A hard shading pattern that rewards patience; keep the moon's inner curve clean since that long sweep frames the entire design.
IntermediateScalloped-Wing Bat
A wide-winged bat hangs in the center of a glowing scalloped panel, its scalloped wing edges and small round eyes standing out in dark relief. You shave the skin away around the bat so the shape stays raw pumpkin while the shaved field lights up behind it. Keep your shading depth even across the whole panel so the backlight glows uniformly around those wing scallops.
Beginner-friendlyBat Pumpkin Stencil
A front-facing bat with outstretched wings fills this jack-o-lantern pumpkin stencil, showing a snarling face at center and jagged wing edges that sweep to pointed tips on each side. The large background panels of each wing are cut away, leaving a solid bat silhouette with interior cut-outs for the eyes and facial features that glow distinctively when lit. Keep the narrow connecting bridge between the bat's body and each wing intact during carving so the whole design holds together.
Beginner-friendlyBat and Moon Pumpkin Stencil
A crescent moon curves across the upper half of the design with a small bat silhouette flying in front of it, both cut through as a single pumpkin stencil. The crescent is a wide sweeping arc and the bat sits slightly below center within the curve, its wings spread and ears pointed. The bat's body stays connected to the moon's surface by a thin shared border; carve the crescent first and leave the bat's outer wing edges touching the moon arc so the bat doesn't shift before you finish the interior.
Expert / ProTilted Jellyfish and Seaweed
A tilted jellyfish drifts with its domed bell up high and dozens of ribbony tentacles flowing down through strands of seaweed, while small bubbles rise around it. Every element is shaved into the skin at varying depths rather than cut through, creating layers of soft glow. This expert etch is all about depth control: shave the bell and bubbles deepest for brightness, keep the tentacles mid-depth, and leave the seaweed shallow so the jellyfish floats forward.