Brookhaven House Window Pumpkin at Blue Hour

From pumpkin to porch

1. 1

   Prep the pumpkin

   Cut the lid from the back and scoop the interior to about 2.5 cm wall thickness. A slightly thicker wall than usual makes the glow from the windows appear warmer and more diffused, which suits the domestic house theme perfectly.

2. 2

   Sketch the house layout

   Lightly pencil in the roof outline at the top of the carving face, two or three square windows in the middle section, and a rectangular door at the base. Use a ruler for the straight roof edge and window sides. Even spacing between windows makes the suburban house motif read clearly.

3. 3

   Transfer and mark the stencil

   Pin-transfer the roof slots, window squares, door, and title position. The title is shallow-backed rather than cut through, so mark those letters with a slightly lighter pencil line than the cut elements to remind yourself during carving.

4. 4

   Cut the roof slots

   Carve the narrow roof slots first since they are at the top of the composition and the easiest cuts in the design. Keep each slot at least 6 mm wide so the light shows clearly. Use a thin straight blade guided by the pencil line.

5. 5

   Cut the windows and door

   Cut each square window as four separate straight cuts meeting at the corners. Remove the square piece cleanly. Repeat for remaining windows, then cut the taller rectangular door. Adults should handle all cutting. Smooth any rough edges with the back edge of the blade.

6. 6

   Etch the title and photograph at blue hour

   Shallow-etch the game title into the rind above or below the windows using a small gouge. Place an LED tea light inside and carry the pumpkin outside just before dusk. Blue hour natural light combined with the warm interior glow creates a beautiful photograph that showcases both the design and the pumpkin's shape.

Written with AI to match this design