Sep 14, 2026

Droopy-Eyed Laughing Ghost Face Pumpkin

Half-moon drooping eyes, a small heart-shaped nose, and a wide open grinning mouth with a curling lower lip give this funny face pumpkin carving its goofy cheerful expression. Small curved lines at the corners of the mouth act as dimple accents. Cut the eye slivers and the tiny nose before opening the large mouth, since the mouth is the biggest single opening and removing it first leaves the face wall soft and prone to warping. Lit from inside on a workbench, the droopy eyes and big grin read as immediately friendly even at a glance.

This is an AI-generated concept image: a realistic, carvable design idea rather than a photo of a finished carve. AI concepts are always labeled and sit out the leaderboard and the contest.

No ratings yet · Sign in to rate

Easy Faces Funny Classic Cutout

ghostface face funny cutout easy laughing droopy-eye open-mouth

Comments (0)

No comments yet — be the first.

Want to try this?

Want a friendly face that lights up big and reads well from the sidewalk? This goofy grin is a great one to try.

Beginner friendly · Simple cutouts + a couple of dimple accents

Read our carving tips

Similar stencils

Look for laughing ghost faces with droopy eyes and a wide open grin.

Tools for this approach

Our suggestions for trying a similar carve. Start with what you already have.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon

A little extra help

Our tips for carving a similar design

The whole personality here comes from the mismatch between the sleepy half-moon eyes and the huge open grin, so the trick is carving the small features first and saving the big mouth for last. Cut the eye slivers and the tiny heart nose while the face wall is still firm, then open the large mouth so the shell does not warp or sag under its own weight. The curved corner lines act as dimples and can be shallow score cuts rather than full openings.

Written by PumpkinCarvingIdeas.com, inspired by the image above. These are our suggestions, not instructions from the uploader. This approach to the AI concept has not been tested on a real pumpkin.

From pumpkin to porch

Pick a tall pumpkin and open a back lid
Choose a smooth, fairly tall pumpkin with a flat area for the face so the wide grin has room. Cut an access hole in the back rather than the top so the front stays uninterrupted for lighting. Angle the cut so the piece does not fall inward. Scoop the inside and scrape the front wall down to about an inch thick so cutting stays easy.
Transfer the face pattern
Tape your printed stencil to the front and poke through the outlines with a pin or nail to dot the design onto the skin. Mark both droopy eye slivers, the small heart nose, the big grin, and the little corner dimple lines. Peel the paper and connect the dots lightly with a marker. Step back and check that the eyes sit above the grin and everything is centered before you cut.
Carve the eye slivers and heart nose first
Use a fine carving saw to cut the two curved half-moon eyes, working slowly through the tapered points. Keep steady pressure and let the saw do the work so the thin tips do not snap. Cut the tiny heart-shaped nose next with short controlled strokes. Doing these small openings while the face wall is still firm keeps everything crisp.
Score the dimple accents
The little curved lines at the mouth corners are surface accents, not full cutouts. Use a lino or shading tool to peel away just the outer skin along those curves so they glow dim instead of bright. This adds the goofy dimple detail without weakening the shell. Keep these cuts shallow and short.
Open the big grin last
Now cut the wide open mouth, the largest single opening. Start in the center and work outward toward each end, keeping the curling lower lip intact as you go. Removing this piece last means the face wall stayed rigid while you did the fine work, so nothing warped. Ease the cutout out gently and clean up the edges.
Light it and take the photo
Drop in a battery LED light or two, since the big mouth needs plenty of glow to fill it. Skip real candles, they scorch the thin lip and are a fire risk. Set the pumpkin at eye level and shoot in a dark room so the grin and droopy eyes pop. Rub a little petroleum jelly on the cut edges to slow drying if you want it to last.

Gather your supplies

Check things off as you get ready.

Work on a stable surface, keep your free hand out of the cutting path, and have an adult handle sharp tools.

Three levels of light

Leave intact
The full orange face skin around the features stays dark and untouched.
Peel & shade
The two small dimple curves at the mouth corners get skin-peeled for a soft dim glow.
Cut through
The droopy eye slivers, heart nose, and wide grin are cut all the way through for the brightest light.

Learn the carving basics

Before you start cutting

Why cut the mouth last if it is the easiest shape?

The grin is the biggest single opening on this face. If you remove it first, the whole front wall loses its support and can flex or sag while you carve the smaller eyes and nose. Saving it for last keeps the shell rigid so your fine cuts stay clean.

How do I keep the curling lower lip from breaking?

Carve around it slowly and support it with your free hand as you finish the cut. Leave it a little thicker than the rest of the mouth edge for strength. Since this is a concept design, aim for a lip at least a half inch wide so a real pumpkin version holds up.

How do I get the eyes to look droopy and not just like slits?

Keep the top edge of each eye a gentle curve and let the bottom edge sweep lower toward the outer corners. Widen the middle of each sliver and taper the ends to fine points. That heavier, tilted shape is what gives the sleepy, goofy look.