The 2026 contest winners are inGrand Prize, People's Choice and Most Creative, all crowned.
Winners →
+ Upload
@ai_concepts
Sep 14, 2026
Blinky the One-Eyed Slime Monster pumpkin carvingAI
0

Report this carving

Tell us what is wrong. Reports are private.

Blinky the One-Eyed Slime Monster

A wide-bodied one-eyed monster stares out through a large concentric-ring eye set between two curved horns, with stubby hands poking from its sides and a wavy dripping hem at the bottom, all carved through in this intricate pumpkin carving idea. The concentric rings of the eye are separated by narrow rind channels that require careful saw control. Carve the innermost pupil ring first and work outward through each eye ring before moving to the horns and body, so the eye stays intact throughout.

No ratings yet · Sign in to rate
IntermediateMonstersCuteClassic Cutout
monstercyclopscutecartoonslimehornsone-eyecutout

Save this design for carving night, then share a photo of your own jack-o'-lantern once it's glowing.

All related characters, names, logos, and trademarks are the property of their respective owners. This is an unofficial fan carving shared by our community for inspiration only. PumpkinCarvingIdeas.com is not affiliated with, sponsored by, or endorsed by any rights holder or person depicted, and no such connection is implied.

Comments (0)

  • No comments yet. Be the first.

Our tips for carving a similar design

The whole design hangs on the concentric-ring eye, where narrow bands of rind separate each glowing circle. The plan is to treat those thin rings as bridges you protect while cutting, working from the small pupil outward so nothing collapses. Everything else, the horns, stubby hands, and wavy dripping hem, is straightforward cutout work you save for last.

From pumpkin to porch

  1. Prep the pumpkin and transfer the pattern

    Pick a tall, wide pumpkin with a smooth, flat face so the round eye reads cleanly. Cut a lid from the bottom or the back rather than the top so the body stays intact, then scrape the inside wall behind the face down to about one inch. Tape your stencil on and poke the outlines with a pin or transfer tool. Take your time dotting the ring edges, since those lines guide every cut later.

  2. Carve the eye from the center out

    Start with the innermost pupil crescent and the small circle around it, cutting those through first. Then move outward through each ring one at a time, leaving the narrow rind channels between them uncut so the eye stays supported. Use a fine detail saw and let the blade do the work with slow, short strokes. Keeping to this inside-out order means the delicate bands never lose their neighbors while you carve.

  3. Cut the horns and outer body line

    With the eye finished, saw out the two curved horns above it and the thin gap that separates the head shape from the background. Keep the horn tips slightly rounded rather than needle-sharp so they do not snap. The single line arcing around the body can stay as a shallow channel or a full cut, depending on how much glow you want along the edge.

  4. Add the mouth, fangs, and hands

    Cut the smiling mouth opening, then carefully carve around the two small fangs so they remain as attached bridges of rind at the top and bottom. Do the stubby side hands next, leaving the little finger slivers connected. Small pointed shapes like these are easiest with a fresh, thin blade and gentle pressure.

  5. Open the dripping hem last

    Save the big wavy bottom opening and the hanging drip shapes for the end, since it is the largest cutout and weakens the wall. Cut the main wavy band first, then the separate teardrop drips above it. Removing this much material last keeps the pumpkin rigid while you handle the finer work above.

  6. Light it and photograph

    Drop a battery LED puck or string inside, never a candle, and set the brightness so the ringed eye glows without washing out. Set the pumpkin on a porch or deck at dusk and shoot slightly off to one side to catch the depth of the eye rings. Blot any moist edges with a paper towel so the light stays clean and even.

Written with AI to match this design

Gather your supplies

Check things off as you get ready.

Work on a stable surface, keep your free hand out of the cutting path, and have an adult handle sharp tools.

Three levels of light

  • Leave intact

    The monster's body skin and background stay untouched and dark, holding the shape together.

  • Peel & shade

    Shave the thin rind channels between the eye rings and the fang bridges for a soft dim glow that keeps them readable.

  • Cut through

    Cut fully through the eye rings, horns, mouth, hands, and the wavy dripping hem for the brightest light.

Learn the carving basics

Before you start cutting

How do I keep the eye rings from falling out?

The trick is order and patience. Carve the small pupil first, then each ring moving outward, and never cut two adjacent rind channels at once. As long as the narrow bands between rings stay attached on both sides, the whole eye supports itself.

This is a concept image, so can a real pumpkin hold all these rings?

Yes, if you keep the rind channels between rings at least a quarter inch wide. On the pictured concept no real pumpkin exists, so treat the thin bands as bridges and widen any that look too delicate. A slightly thicker channel glows just as well and is far less likely to tear.

Should the fangs be cut all the way through?

Leave the fangs as attached rind rather than free-standing points. Cut the dark mouth opening around them so they read as pale teeth against the light. Full cutout fangs on a design this small tend to snap, so keeping them as bridges is both safer and cleaner.

Your take belongs here, too.

Changed a detail? Made it simpler? Share a photo of your version and tell the community what worked.

Share your pumpkin

Want more designs like this? Browse our full library of pumpkin carving ideas, or pick a free printable stencil. Every pattern and template in our own collection is free to print at home.

More pumpkins like this

Shaggy the One-Eyed Cyclops pumpkin carving
AI
Shaggy the One-Eyed Cyclops
@ai_concepts0
Waving Winky the Cyclops pumpkin carving
AI
Waving Winky the Cyclops
@ai_concepts0
Battie the Winged Monster pumpkin carving
AI
Battie the Winged Monster
@ai_concepts0
Winky the Lopsided Monster pumpkin carving
AI
Winky the Lopsided Monster
@ai_concepts0
Shag the Waving Furry Monster pumpkin carving
AI
Shag the Waving Furry Monster
@ai_concepts0
Peekaboo the Eye-Stalk Monster pumpkin carving
AI
Peekaboo the Eye-Stalk Monster
@ai_concepts0
Nub the Little Horned Monster pumpkin carving
AI
Nub the Little Horned Monster
@ai_concepts0
Chompy the Potted Monster Plant pumpkin carving
AI
Chompy the Potted Monster Plant
@ai_concepts0
You've reached the end · 8 pumpkins
The Patch Report

Fresh pumpkins, in your inbox.

The best new carvings, ideas worth stealing, and how-tos for carving season. Short, seasonal, and gone by November.

A short email during carving season. Unsubscribe anytime. See our privacy policy.