The 2026 contest winners are inGrand Prize, People's Choice and Most Creative, all crowned.
Winners →
+ Upload
@ai_concepts
Sep 14, 2026
Hops the Tall-Eared Rabbit pumpkin carvingAI
0

Report this carving

Tell us what is wrong. Reports are private.

Hops the Tall-Eared Rabbit

A glowing rabbit sits in profile with two tall upright ears, a rounded body, and small front and back feet just visible at the base, the entire shape cut clear through the pumpkin wall as a solid cutout. The simplicity of this pumpkin carving idea makes it easy for beginners while still producing a striking silhouette jack-o-lantern when lit from inside. Trace the ear outlines last before cutting since they are the most exposed point and easiest to snap; cutting the rounded body first gives you a stable mass to grip while finishing the tips.

No ratings yet · Sign in to rate
EasyAnimalsCuteClassic Cutout
rabbitbunnyanimalsilhouettecutoutcuteminimalist

Save this design for carving night, then share a photo of your own jack-o'-lantern once it's glowing.

Comments (0)

  • No comments yet. Be the first.

Our tips for carving a similar design

The whole design is one solid silhouette cut clear through the pumpkin wall, so the entire rabbit becomes a bright glowing shape when lit from inside. The core trick is carving the rounded body first to keep a stable mass to grip, then saving the tall thin ears for last since they are the most exposed point and easiest to snap. Keep your lines smooth and continuous and the profile reads instantly.

From pumpkin to porch

  1. Pick a smooth pumpkin and open the back

    Choose a pumpkin with a broad, even front panel so the full rabbit fits without wrapping around a curve. Cut a lid in the back rather than the top so the face of your carving stays clean. Scoop the insides and thin the front wall to about one inch with a scraper. A thinner wall makes the silhouette easier to cut and lets more light through.

  2. Transfer the rabbit outline

    Print the seated rabbit profile at a size that leaves at least two inches of skin around every edge. Tape it flat to the front and poke closely spaced dots along the whole outline with a pin or transfer tool. Trace the ear outlines last so you handle that fragile area as little as possible. Peel the paper away and connect the dots lightly with a pencil if the pattern is faint.

  3. Cut the rounded body first

    Using a small serrated saw tool, start with the big rounded body and back of the rabbit. Work with gentle sawing motions and let the tool do the work instead of forcing it. Keeping the body opening intact first gives you a solid mass to hold while you finish the delicate parts. Push each freed piece out gently from the inside.

  4. Add the feet and connect the base

    Cut the small front and back feet that peek out at the bottom of the shape. Keep these openings a little rounded so no narrow point is left to crumble. Follow your traced line closely so the feet stay in proportion with the body. Clean up the edges with light passes for a crisp outline.

  5. Save the tall ears for last

    Now carve the two upright ears, the most exposed and snap prone part of the design. Cut slowly from the base of each ear up toward the tip, supporting the surrounding skin with your free hand. Leave the outer walls of the ears a touch wider than feels necessary for strength. If an ear feels wobbly, avoid pressing on it and let the pumpkin firm up before moving it.

  6. Light it and take your photo

    Drop a battery LED tea light or a small LED puck inside, never an open flame near these thin cutouts. Set the pumpkin on a stable surface like a wooden stool and shoot at dusk for the warmest glow. If the light looks uneven, angle the LED slightly forward so it fills the body evenly. Wipe stray pencil marks from the skin before your final shot.

Written with AI to match this design

Gather your supplies

Check things off as you get ready.

Work on a stable surface, keep your free hand out of the cutting path, and have an adult handle sharp tools.

Three levels of light

  • Leave intact

    The entire outer skin around the rabbit stays untouched and dark, framing the silhouette.

  • Peel & shade

    Optional: lightly skin a thin halo just inside the body edge for a soft glow border before the full cut.

  • Cut through

    The whole rabbit shape, body, feet, and ears, is cut clear through for the brightest solid glow.

Learn the carving basics

Before you start cutting

How do I keep the tall ears from snapping?

Carve them last, after the body is already open, so the pumpkin is easier to steady. Cut from the base upward and support the skin beside each ear with your other hand. Leave the ear walls slightly thicker than the rest for extra strength.

Should I cut a lid on top or open the back?

Open the back for this design so the rabbit profile on the front stays uninterrupted. A back opening also lets you reach in to push out cut pieces and position the light. Keep the front wall thinned to about an inch for clean cutting.

Will the body stay strong once it is fully cut out?

Yes, because the rabbit is one connected shape, the remaining pumpkin skin forms a solid frame around it. Just avoid pressing on the ear tips or narrow feet when moving it. Let the pumpkin sit a bit after carving so the flesh firms up.

Your take belongs here, too.

Changed a detail? Made it simpler? Share a photo of your version and tell the community what worked.

Share your pumpkin

Want more designs like this? Browse our full library of pumpkin carving ideas, or pick a free printable stencil. Every pattern and template in our own collection is free to print at home.

More pumpkins like this

Clover the Cottontail Bunny pumpkin carving
AI
Clover the Cottontail Bunny
@ai_concepts0
Glowing Pokemon Cutout Pumpkin
AI
Glowing Pokemon Cutout Pumpkin
@ai_concepts0
Glowing Pokemon Silhouette Pumpkin
AI
Glowing Pokemon Silhouette Pumpkin
@ai_concepts0
Painted Pip the Pink Bunny, a painted no-carve pumpkin
AI
Painted Pip the Pink Bunny
@ai_concepts0
Detailed Clover the Bunny pumpkin carving
AI
Detailed Clover the Bunny
@ai_concepts0
Glowing Cottontail the Bunny pumpkin carving
AI
Glowing Cottontail the Bunny
@ai_concepts0
Hoppy Marigold the Bunny pumpkin carving
AI
Hoppy Marigold the Bunny
@ai_concepts0
Intricate Thistle the Bunny pumpkin carving
AI
Intricate Thistle the Bunny
@ai_concepts0
You've reached the end · 8 pumpkins
The Patch Report

Fresh pumpkins, in your inbox.

The best new carvings, ideas worth stealing, and how-tos for carving season. Short, seasonal, and gone by November.

A short email during carving season. Unsubscribe anytime. See our privacy policy.