Similar to This
View all stencils →About this stencil
A football sits sideways across the pumpkin with its center lace stripe and six cross laces picked out in pale shaved flesh. The design uses no pierced openings; you shave the skin from the outline band, the end panels, and the laces while the body of the ball stays orange rind. It is an easy first etching project; score the outlines with a knife tip before shaving so your edges stay sharp. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a continuous-wall shading design: you never cut all the way through the pumpkin. On the printable pattern, light gray regions get just the skin shaved off for a faint glow, dark gray regions are scraped deeper so more light comes through, and white areas keep their skin untouched. The numbers give you the safest working order. Plan on about 60-90 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the wall to about 1 inch behind the design so light can pass through the shaded areas. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer the outlines by poking dots along every line. Work with a loop tool, clay ribbon scraper, or the back of a spoon rather than a saw.
Shading order
- Expose outline and laces. Remove skin and scrape shallowly across all gray regions. Preserve the white central ball field and both pointed end panels as untouched rind. Trace the wide oval outline, two side stripes and six rounded vertical laces.
- Light the two side stripes. Deepen the dark-gray side stripes marked 2. Keep their pale edges shallow and preserve the large white center panel. The plain ball has no logo or team lettering.
- Finish the horizontal lace. Deepen the narrow dark-gray horizontal lace marked 3. Keep all six vertical laces shallow so the central bar glows brighter. Check with an LED before thinning further; never cut through the wall.
Check your progress often: set a bright LED inside and dim the room lights, and the glow shows exactly where to scrape deeper. Go slowly near thin spots and stop before the wall flexes; a pierced wall cannot be undone.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediateFootball & Seven Laces
A big textured football fills the pumpkin face, with two end stripes and a center lace strip of seven crossing laces left in pale relief. This is a shading design: the ball's pebbled leather area is shaved to mid-depth while the laces, stripes, and outline are scraped lighter so they pop. At medium difficulty, dab the shaved leather zone with a rounded tool to build that pebble texture, keeping the lace lines crisp and untouched.
Expert / ProFour Woodland Toadstools
Four spotted woodland toadstools cluster among curling leaves and grasses, carved in deep relief so the caps, gills, and stems stand out from the shell in true sculptural layers. Nothing is pierced; the design is built entirely by shaving and sculpting the wall to different depths, with the tall center mushroom's gilled underside as the showpiece. Rough out the deepest background first, then refine the gill lines last with a V-gouge while the ridges are still thick.
Expert / ProWoodland Toadstool Relief
An enchanted cluster of spotted toadstools carved in deep relief: one grand mushroom with a striped, gilled underside towers over smaller caps, ribbed stems, and leafy ground cover below. There are no pierced holes; the whole scene is sculpted by shaving the wall to different depths so light glows warmest under the big cap. This expert design rewards planning, so rough out the major cap shapes first and save the fine gill lines and spots for last.
Expert / ProCrescent over Wooded Hills
A dreamy night landscape wraps the pumpkin: a large crescent moon and a sky full of four-point stars shine above rolling wooded hills dotted with pine trees. The whole scene is skin-shave shading with no pierced holes, so moon, stars, ridgelines, and trees glow at different intensities depending on how deep you scrape. As an expert design, map your depths first: carve the moon deepest for the brightest glow, the hills shallowest for a soft dusk.
Expert / ProFour Spotted Toadstools
Four spotted toadstools of staggered heights grow from a glowing patch of grass, the tallest cap arching over three smaller companions. This expert shading piece uses multiple depths: gills under the big cap are shaved brightest, stems and caps sit mid-tone, and the spots are left as darker raised dots. Map your depth levels before touching a tool, and carve the delicate gill lines with a fine gouge in single confident strokes.
IntermediateEight Petals and Three Seeds
Eight oval petals radiate from a dotted center like a stylized sunflower, with three small seed holes in the middle and a leafy stem opening anchoring the bloom below. Each petal is a pierced oval, and the skin spokes left between them hold the flower together while letting light pour through. Cut opposite petals in pairs, top then bottom, left then right, so the spokes never take uneven strain.