Similar to This
View all stencils →About this stencil
A crescent moon hangs over a band of rolling hills while four small stars dot the sky above. Nothing is pierced: you shave away only the skin inside the moon, stars, and hill line, leaving a thin wall that glows soft amber when lit. Keep your shaving depth even, about a quarter inch, so the moon and hills light up at the same brightness across the whole scene. This design is rated Intermediate and takes most carvers around 75 minutes from trace to glow. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediateSnowcap Peaks and Moon
A wide arched window is carved through the pumpkin with three mountain peaks left standing in dark silhouette, while a full moon glows from a separate round opening above. The sky area around the peaks gets cut away and small snowcap notches pierce the summits, so light outlines the whole range. Keep the peak silhouettes attached at the base as you saw the sky sections, since they anchor the entire scene.
IntermediateThree Crescents and Six Dots
Three crescent moons of different sizes climb diagonally across the pumpkin, trailed by six small round dots like distant stars. Every crescent and dot is pierced fully through, giving a modern, almost tattoo-style celestial arrangement once the candle is lit. The medium rating comes from the crescents' thin inner horns, so drill or poke each dot first for practice, then cut the crescents starting at the fat middle and working out toward each narrow tip.
Beginner-friendlyUnequal Arms Saguaro
A tall saguaro cactus rises up the pumpkin with two curving arms set at different heights, one reaching high and one bent low. The entire cactus is a single pierced cutout, so the whole plant glows as one bold desert silhouette. This easy design has no fiddly interior pieces; just take the inside curves of the arms slowly so the elbow bends come out smooth rather than angular.
Beginner-friendlyThree Mountains and Moon
A minimalist night landscape made of three simple triangle peaks in a row with a full round moon floating above them. Each triangle and the circle are cut cleanly through, turning the pumpkin into a tiny glowing mountain scene. This is one of the easiest patterns to carve; keep the triangle points sharp by cutting into each corner from both directions instead of turning the blade.
IntermediateSix-Point Starburst
A bold six-pointed starburst fills the front of the pumpkin, with slim rays shooting out from a hexagonal core. The entire star is a single pierced opening, so the light pours through the center and tapers into each sharp point. Use slow, shallow saw strokes as you approach the ray tips, since those narrow points are the easiest spots to overcut.
Beginner-friendlyCrescent Moon and Star Pumpkin Stencil
A large crescent moon curves across most of the design while a single five-pointed star sits nestled in the open interior of the crescent in this easy space pumpkin stencil, both shapes carved as open silhouettes. The crescent is a large single cut, and the small star inside it is a separate isolated piece that must be removed independently. Cut the star's five points with precise plunge cuts at each tip before slicing the connecting straight sides, then remove the star before carving the surrounding crescent so your hand has room to maneuver.