The 2026 contest winners are inGrand Prize, People's Choice and Most Creative, all crowned.
@ai_concepts
Sep 25, 2026
DOORS Seek Eye Jack-O-Lantern pumpkin carvingAI
0

Report this carving

Tell us what is wrong. Reports are private.

DOORS Seek Eye Jack-O-Lantern

This easy doors roblox pumpkin carving captures Seek's unsettling eye with two broad crescent openings flanking a wide vertical rind pupil bar, plus a separate simple keyhole below, creating maximum glow impact from minimal cuts. Carve the left and right crescents before the keyhole so the pupil bar position stays centered, keeping that vertical bar wide so it holds structural weight. Placed on a dark windowsill, the glowing crescent pair and keyhole look genuinely alarming from the outside.

No ratings yet · Sign in to rate
EasyMonstersScaryClassic Cutout
doors-robloxmonstervideo-gamerobloxscaryeasyseek-eyecrescent

Save this design for carving night, then share a photo of your own jack-o'-lantern once it's glowing.

Roblox and all related characters, names, logos, and trademarks are the property of their respective owners. This is an unofficial fan carving shared by our community for inspiration only. PumpkinCarvingIdeas.com is not affiliated with, sponsored by, or endorsed by any rights holder or person depicted, and no such connection is implied.

Comments (0)

  • No comments yet. Be the first.

Our tips for carving a similar design

Two broad crescent openings placed left and right of a wide vertical rind pupil bar recreate Seek's unsettling eye with minimal cuts. A separate keyhole below ties the design to the Doors game world. Carving the two crescents before the keyhole keeps the pupil bar perfectly centered throughout the process. Placed on a dark windowsill, the glowing crescents are genuinely alarming from outside.

From pumpkin to porch

  1. Prep the pumpkin

    Cut the lid from the back of the pumpkin and scoop the interior to a 2 to 2.5 cm wall. A slightly thicker wall softens the crescent glow to a moody rather than harsh light level that suits the horror game theme. Choose a pumpkin with a wide, smooth face for best results.

  2. Mark the pupil bar center

    Draw a vertical center line on the carving face and mark the height and width of the pupil bar. The pupil bar should be at least 2.5 cm wide to ensure it holds structural weight between the two crescent openings. Everything else in the design positions relative to this central bar.

  3. Transfer your crescent and keyhole stencil

    Pin-transfer the left crescent, right crescent, and keyhole. Confirm that the vertical pupil bar between the crescents is fully intact in the pin-transfer marks before removing your stencil. The bar must not be perforated by the crescent cut lines.

  4. Cut the left crescent

    Carve the left crescent as a single smooth curved through-cut, starting at the top arc and working around to the bottom. Keep the blade pressed gently against the outer curve guide rather than steering it freehand. Remove the crescent piece and clean any rough edges.

  5. Cut the right crescent

    Mirror the left crescent cut on the right side, maintaining the same arc depth and height. After both crescents are open, step back and view the eye from normal display distance to confirm the pupil bar reads centrally and symmetrically.

  6. Cut the keyhole and display

    Carve the keyhole shape below the eye with a detail knife, starting with the round top of the keyhole and finishing with the narrow rectangular base slot. Place an LED tea light inside and set the pumpkin on a dark windowsill where the crescents will be visible from outside.

Written with AI to match this design

Gather your supplies

Check things off as you get ready.

Work on a stable surface, keep your free hand out of the cutting path, and have an adult handle sharp tools.

Three levels of light

  • Leave intact

    The vertical pupil bar between the two crescents and the surrounding rind stay dark, forming the eye structure.

  • Peel & shade

    No shallow relief on this design.

  • Cut through

    Both crescent openings and the keyhole are fully cut through for bright, direct light.

Learn the carving basics

Before you start cutting

How do I stop the crescent cut from running into the pupil bar?

Mark the inner edge of each crescent with a solid pencil line before cutting, and keep the blade on the outer side of that line. Cut the arc from the top downward in one smooth stroke rather than a sawing motion, which is more likely to drift. Pause at the inner edge and lift the blade rather than pushing through.

What if my crescents come out uneven and the pupil bar looks off-center?

Minor unevenness is far less visible once the pumpkin is lit and displayed from normal distance. If one crescent is noticeably larger, very carefully widen the smaller crescent from its outer edge (away from the pupil bar) by a few millimetres to restore balance.

Does the keyhole need to be a precise shape to read as a keyhole?

The most important features are the round top and the narrow rectangular bottom slot. As long as those two elements are present and connected, viewers read it as a keyhole. The exact proportions can vary without losing the association.

Your take belongs here, too.

Changed a detail? Made it simpler? Share a photo of your version and tell the community what worked.

Share your pumpkin

Want more designs like this? Browse our full library of pumpkin carving ideas, or pick a free printable stencil. Every pattern and template in our own collection is free to print at home.

More pumpkins like this

You've reached the end · 8 pumpkins
The Patch Report

Fresh pumpkins, in your inbox.

The best new carvings, ideas worth stealing, and how-tos for carving season. Short, seasonal, and gone by November.

A short email during carving season. Unsubscribe anytime. See our privacy policy.