Pumpkin carving templates
572 free printable stencils. Download, print, trace, carve.
176 results · Page 2 of 5
Cyclops Monster Pumpkin Stencil
A quirky one-eyed long-necked creature with a rounded bird-like body, a spiral cyclops eye, and a jagged toothed mouth stands on two stubby feet in this easy Halloween pumpkin stencil. The body is largely pierced through as a dark void while the eye ring and neck details remain as uncut pumpkin. The thin neck connecting the large head to the body is the most delicate bridge in the design, so carve the body void and the mouth teeth first, then cut around the neck last to keep it from snapping early.
Cyclops Monster Pumpkin Stencil
This one-eyed monster face jack-o-lantern stencil pairs a massive single eye opening at the top, with a crescent of solid orange forming the pupil island, with a lower face panel bearing a triangular nose and a wide blocky grin of square teeth. Both sections are fully cut through, flooding the pumpkin face with light. Keep the thin orange strip separating the upper eye section from the lower mouth panel intact as a structural bridge until the very last cut.
Dancing Girl Pumpkin Stencil
A small cartoon girl with a ponytail stands with arms spread wide in this pumpkin stencil, her entire silhouette carved as a single large opening surrounded by six small four-petal flower cutouts scattered around her. The figure and each flower are separate pierced-through shapes, so the finished jack-o-lantern shows a glowing girl dancing among floating blooms. Cut the six small flower shapes first so the surrounding pumpkin wall absorbs tool pressure before you open the larger central figure.
Darwin Fish Pumpkin Stencil
The iconic Darwin fish emblem fills this pumpkin stencil as a horizontal fish silhouette with small walking legs at the bottom, the word DARWIN lettered inside the body using bold block capitals separated by vertical post bridges. Both the fish background and the letter interiors are cut through, so the orange bridges spelling out DARWIN glow as solid bars when lit. Carve the background fish outline opening first, then cut each letter interior separately to keep the thin vertical bridges from flexing and cracking.
Deer Skull and Rifles Pumpkin Stencil
Two crossed hunting rifles sit below a buck's-head silhouette with a full multi-point rack of antlers, forming a classic skull-and-crossbones arrangement in a hunting theme. All three elements are cut out as open silhouettes, so the rifles and antlers glow as bright orange shapes against the dark pumpkin. The junction where the rifle stocks cross is a narrow pinch point; trace that intersection carefully and cut each rifle as a separate pass rather than one continuous stroke to preserve the crossing bridge.
Dollar Sign Pumpkin Stencil
A bold dollar-sign symbol fills the center of this pumpkin stencil, its curved S-shape and two vertical bar segments carved through entirely so candlelight blazes through the open silhouette. The thick outer outline stays solid, holding the shape firmly on the pumpkin wall. Because the two short horizontal bars at top and bottom are separate cut-outs, cut those small pieces first before tackling the large curved body so the surrounding wall stays supported throughout.
Dragon Eye Pumpkin Stencil
An enormous reptilian eye dominates this pumpkin stencil, rendered as a slit-pupil iris surrounded by jagged scale-like fragments and frayed, tooth-edged eyelid margins. The large pupil and the scales radiating outward are all pierced sections, leaving thin orange bridges between them that suggest skin and scale texture when lit. Because many of the scale pieces are isolated islands surrounded by cut areas on all sides, pin each one with a toothpick before making final cuts to prevent pieces from dropping inward and tearing the bridges.
E=MC2 Pumpkin Stencil
Einstein's famous equation is carved as bold block letters spelling E = MC2 across this easy pumpkin stencil, with the superscript "2" rendered in smaller fragments to the upper right of the C. Each letter is a chunky stencil-style cutout with internal bridges holding counter shapes such as the horizontal bars inside the E. The superscript "2" has two small separate island pieces; cut the main letters first and save those two small fragments for last so they don't shift before the surrounding skin is stable.
Eiffel Tower Pumpkin Stencil
The Eiffel Tower fills this easy pumpkin stencil as a symmetrical stack of horizontal rectangular cutouts that grow wider toward the base, with a pointed antenna tip at the top, paired diagonal leg sections, and a large arched base opening at the bottom. All the horizontal bars and the arch are pierced through while the thin vertical struts between them remain solid. Work from the antenna tip downward, cutting each horizontal bar in turn, so the struts stay braced by the surrounding uncut skin until the very last base arch is removed.
Evil Clown Pumpkin Stencil
A sinister clown face with tall horn-like hair spikes, hollow cheekbone arches, a wide gaping smile showing separated teeth, and small spiral eye-corner details makes this hard evil clown pumpkin stencil immediately recognizable. The design is carved almost entirely as negative space, with the face, mouth, and eye areas all open and the narrow skin ridges of the hair spikes and cheek arches defining the character. The two tall hair spikes at the top are the thinnest connected elements, so cut them after all the large face openings are out to keep them from vibrating loose during the heavier cuts.
Evil Clown Pumpkin Stencil
Jagged wing-like eyes arch above a massive serrated grin packed with long, irregular fangs on this evil clown jack-o-lantern pumpkin stencil. Both eye pieces and the mouth arc are fully cut through, leaving a small heart-shaped nose sliver as the only solid detail inside the grin. The thin points of each fang are the most fragile elements: carve the broad base of the mouth opening first, then carefully nibble out each fang tip from base to point to avoid snapping them off.
Fairy Silhouette Pumpkin Stencil
A fairy silhouette in mid-flight fills this Halloween pumpkin stencil: wings spread wide, one arm extended forward, legs bent behind her in motion. The entire figure is carved away as a single large negative space, so the fairy appears as a dark void backlit by candle glow against orange pumpkin skin. Because the wing tips and fingertips taper to narrow points, keep the blade perpendicular to the surface and cut those extremities last, after the bulk of the silhouette is already removed.
Farmyard Hen Pumpkin Stencil
A plump farmyard hen in three-quarter profile fills this easy pumpkin stencil, its silhouette showing a small comb and wattle, a rounded body with layered wing and tail feathers, and two stick-like legs with splayed claws. The entire chicken outline is one solid cutout with the background carved away, producing a dark hen silhouette against glowing orange when backlit. The thin leg shafts and the claw toes are the most fragile sections, so carve the body first and save the legs for the very end, taking care at each claw tip.
Fetus in Womb Pumpkin Stencil
A fetus-in-womb pumpkin stencil showing a curled embryo silhouette floating inside a large circular womb shape, with a crescent arc cut above it and a curved base piece below, suggesting the rounded cavity of the uterus. The fetus itself remains solid orange with detail cut-outs defining tiny clenched fists and a rounded head, while the surrounding womb sections are pierced to glow. Cut the large curved womb sections first, then the small fetal detail cuts, leaving the fragile umbilical cord line as the very last cut.
Flamingo Pumpkin Stencil
A flamingo stands with its long neck bent gracefully downward and its head dipped toward its breast on this easy Halloween pumpkin stencil. The entire bird is carved away as a single fluid silhouette revealing the glow within, while the two impossibly thin legs are the critical structural bridges connecting the large body void to the base of the cut. Score along each leg edge with a single controlled pass before removing the neighboring body mass on either side, so the legs don't fracture mid-cut.
Fluffy Kitten Pumpkin Stencil
A wide-eyed, fluffy kitten sits upright with its front paws tucked forward in this expert-level pumpkin stencil. The fur is rendered as dozens of short jagged cut-outs that texture the entire head and body, with two large round eyes and a small tongue-out mouth pierced through in the face. Lit from within, the cat's face glows clearly while the fur detail creates a speckled halo of light around it. Cut all the inner facial features before the outer fur ring, since the edge fringe is fragile and removing those last keeps the face from shifting while you work.
Flying Owl Pumpkin Stencil
A front-facing owl in full wing spread fills this easy pumpkin stencil, the entire bird rendered as a single solid silhouette with ear tufts visible at the top of the head and feathered wingtips fanning wide on both sides. The whole shape is pierced as one large cutout, so the lit jack-o-lantern throws a bold bright owl outline with no interior detail to worry about. Thin the pumpkin wall evenly behind the wing tips before cutting, since the long feather edges can crack if the wall is too thick when you remove the large central section.
Flying Saucer Pumpkin Stencil
A flying saucer pumpkin stencil with a domed upper hull made of stacked horizontal band segments separated by narrow orange ribs, creating a layered effect that suggests a ringed spacecraft in profile. The bands alternate between cut and solid, so when lit the saucer appears to glow with horizontal light stripes rather than as a flat shape. Cut the widest central band first to anchor your position, then work upward band by band toward the dome, keeping each thin rib intact so the layers do not collapse mid-carve.
Friendly Jack-o-Lantern Pumpkin Stencil
Two rounded horseshoe-arch eyes, each with a small bump notched from the bottom to suggest eyebrows, and a broad curved mouth split by two square bottom teeth define this easy pumpkin stencil. The asymmetry between the left eye (fuller arch) and the right eye (slightly smaller, offset notch) gives the face a winking or quizzical personality. All cut-outs are generous and smooth, making this a good pumpkin stencil for carvers who want a friendly face without tiny fiddly pieces. Leave the two small inner-eye notches for last so the arch stays rigid while you cut the mouth.
Full Skeleton Pumpkin Stencil
A full standing human skeleton fills this pumpkin stencil from skull to toe bones, its ribcage, pelvis, limb segments, and finger and toe joints all rendered as distinct cut-out sections separated by thin solid bridges. When lit, every bone grouping glows individually against the orange pumpkin wall. Cut the ribcage slots from the center outward to avoid destabilizing the spine bridge that holds the upper torso together.
Game Over Pumpkin Stencil
"GAME OVER" fills this easy pumpkin stencil in two stacked rows of chunky 8-bit pixel font lettering, each character built from squared-off rectangular blocks with notched corners that read unmistakably as retro video game text. Every letter interior is cut through, and the negative space between characters is narrow but distinct. The squared notches at the corners of each letter are the trickiest spots to keep clean; use the tip of a narrow blade to score those inside corners before opening the main letter body.
Garden Gnome Pumpkin Stencil
A garden gnome with a tall floppy pointed hat, round rosy cheeks, and a tiny curved smile stands front-facing in this easy pumpkin stencil. The hat brim curls at its tip, the face is framed by a bushy beard rendered as rounded overlapping lobes, and small feet peek out at the base. Cut-through openings define the hat interior, the beard lobes, and the body, while the face circle, hat brim, and outer silhouette stay solid. The small smile curve and cheek details are the most delicate pieces, cut them before opening the large beard sections below.
Gargoyle Pumpkin Stencil
A crouching gargoyle with spread bat wings, a fanged open jaw, and clawed feet fills this hard pumpkin stencil. The wings are rendered as multiple angled blade-like panels, the body and head form a compact central mass, and the whole figure is composed of closely spaced pierce-throughs separated by narrow pumpkin-wall bridges. Lit from within, the gargoyle appears as a fiery orange silhouette. Begin with the head and jaw details before cutting the wing panels, since the narrow bridges connecting the wing sections to the body spine are the most structurally critical lines in this design.
Gargoyle Pumpkin Stencil
A detailed gargoyle face stares out from this expert pumpkin stencil, with swept-back horns, pointed ears, arching eyebrows, a broad flat nose, and wide wings that flare to either side like a cathedral guardian. Dozens of separate cut-out pieces form the facial features and wing feathers, leaving solid bridges of pumpkin skin to hold each island in place. Work from the smallest interior details outward: cut the eyebrow slashes, nostril notch, and tiny chin dimple first, then the larger wing panels last, to keep the fragile facial bridges stable while you carve.
Ghost Mask Pumpkin Stencil
A ghost-faced horror-movie mask is the subject of this easy pumpkin stencil: an elongated oval skull shape with two large teardrop eye cutouts, a small oval nose hole, and a wide gaping mouth that tapers to a pointed chin. Flowing tendrils extend from the lower sides of the mask. The three facial openings glow as three distinct shapes, and the flowing lower extensions give the mask a draping, spectral quality when lit. Cut the narrow nose piece first since it sits between the two large eye openings and is the most vulnerable to tearing.
Giant Panda Pumpkin Stencil
A giant panda sits upright in this easy pumpkin stencil, its chunky arms raised wide, rounded ears perched on top, and oval eye patches, a small nose, and a belly spot forming the face and body markings. The large body shape, the eye patches, and the surrounding negative space are cut through in layers, while the connecting bridges between ears and head and between arms and body stay solid. Carve the smaller eye patch ovals before the large outer body cut to avoid the face area shifting while you work the perimeter.
Giraffe Pumpkin Stencil
A giraffe's elongated head and neck fill this pumpkin stencil from top to bottom, its distinctive coat pattern recreated as dozens of organic blob-shaped spots scattered across the neck and face. Each spot is a separate pierced-through opening, so when lit the jack-o-lantern glows with a constellation of irregular patches that read unmistakably as giraffe markings. Because many spots sit close together, cut the smallest spots near the top of the head first and work downward toward the larger neck patches, so the thin walls between neighboring openings stay supported longest.
God Bless America Pumpkin Stencil
Bold block lettering spelling "GOD BLESS" arches above a full American flag, with the canton's grid of 50 open stars and seven horizontal stripes cut through below, and "AMERICA" in wide stencil letters across the bottom of this pumpkin stencil. The stars are the most demanding element: each is pierced individually while thin pumpkin skin forms the canton background. Cut the stripe sections and base text first, then work through the star field from the center outward to keep the canton wall stable.
God Bless the USA Pumpkin Stencil
Bold block lettering spells out "GOD BLESS THE U.S.A." across two lines, with small five-pointed stars separating the letters in the lower line. The upper row uses chunky serif-style caps and the lower row uses even larger, slightly decorative capitals. Every letter interior is pierced through so the full phrase blazes when the pumpkin is lit. Keep the thin straps of orange between adjacent tall letters intact as you carve, since they carry the structural load of the entire upper row.
Golden Retriever Pumpkin Stencil
A golden retriever's face looks straight out from this easy pumpkin stencil: wide floppy ears, a broad forehead, round eyes with small arched brows above them, a large nose, and a happy open mouth with tongue showing are all carved as pierce-throughs. The ears are the largest cut areas and frame the face with an even glow. When the pumpkin is lit, the dog's expression reads as warm and friendly. Carve the small eyebrow arches before removing the large ear sections, since the brows are thin and easy to lose once the nearby wall flexes.
Goldfish Pumpkin Stencil
A plump goldfish shown in profile swims to the right: a rounded body, a large flowing tail fin swept back dramatically, a smaller dorsal fin on top, and a single pectoral fin near the belly. A small negative-space teardrop inside the body suggests the gill line. The whole fish is a single connected cut-out, so the lit pumpkin casts one glowing fish silhouette against the dark wall. Keep the narrow pectoral fin intact as long as possible and cut it free only after the main body is removed.
Gone Fishin Pumpkin Stencil
A fisherman standing in the bow of a flat-bottomed bass boat casts a long fishing rod overhead, with water ripples beneath the hull and the words GONE FISHIN' in stencil-style block letters below the scene on this pumpkin stencil. The silhouetted angler and boat hull are cut away entirely, while the thin rod line and letter counters remain as skin bridges. Carve the compact fisherman-and-boat silhouette first, then tackle the letter row below, saving the closed-counter letters for last.
Grim Reaper Pumpkin Stencil
A shrouded Grim Reaper grips a scythe overhead in this expert-level pumpkin stencil, packed with dozens of jagged, flowing cut sections that render tattered robes, bony fingers, a skull face peering from the hood, and a second smaller skull on the chest. The design reads as a dense web of orange skin bridges surrounding numerous glowing cutouts. Tackle the smallest interior cuts around the skull face first so you have full stencil support, then work outward through the robe details toward the large robes and scythe blade.
Grim Reaper Pumpkin Stencil
A flowing Grim Reaper figure grips a long scythe at chest height, its hooded skull face glowing with hollow eye sockets as the ragged robe billows outward below. The curved scythe blade arcs dramatically across the top of the composition. Lit from within, the open robe hem, skeletal hands, and skull interior create a layered halo of light around the solid hood shape. Carve the large open robe sections last so the scythe blade, the most slender element, stays braced by the surrounding pumpkin wall while you work.
Handlebar Mustache Pumpkin Stencil
A wide, curling handlebar mustache is the sole design element of this introductory pumpkin stencil, carved as a single large open shape that sweeps across the pumpkin face. The ends curl upward and outward in tight spirals, while the center dips in a gentle U. The entire mustache is pierced through as one connected opening, so the glow reads as a bold, immediately legible silhouette. Because the cut is one continuous piece, score the center dip first and work outward toward each curled tip to keep the shape from shifting as material is removed.
Happy Birthday Pumpkin Stencil
Bold block-letter text reading HAPPY BIRTHDAY fills this pumpkin stencil in two stacked rows of chunky stencil font, with each letter interior cut away and the letter strokes left as solid pumpkin skin. The design spans nearly the full face of the jack-o-lantern, making it a wide, flat carve with very little negative space. Because the closed counters inside letters like B, D, and P are floating islands of skin, carve the letter surrounds first, then carefully cut the inner counter openings to avoid dislodging them prematurely.